Coilcraft MS512PJB224MSZ High-reliability power inductor Datasheet

6235 POWER INDUCTORS
High-Reliability Power Inductors MS512PJB
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Special construction allows it to pass vibration testing to
80 G and shock testing to 1000 G.
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
Core material Ferrite
Terminations Tin-lead (63/37) over tin over nickel.
Weight 460 – 480 mg
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 350/7″reel
Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing,
3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
DCR3
Inductance2
max
Part number1 ±20% (µH) (Ohms)
MS512PJB682MSZ
6.8
0.075
MS512PJB822MSZ
8.2
0.095
MS512PJB103MSZ
10.0
0.100
MS512PJB123MSZ
12.0
0.110
MS512PJB153MSZ
15.0
0.125
MS512PJB183MSZ
18.0
0.140
MS512PJB223MSZ
22.0
0.145
MS512PJB333MSZ
33.0
0.180
MS512PJB473MSZ
47.0
0.245
MS512PJB563MSZ
56.0
0.280
MS512PJB683MSZ
68.0
0.345
MS512PJB823MSZ
82.0
0.315
MS512PJB104MSZ
100.0
0.375
MS512PJB124MSZ
120.0
0.435
MS512PJB154MSZ
150.0
0.535
MS512PJB224MSZ
220.0
0.720
MS512PJB334MSZ
330.0
1.02
MS512PJB474MSZ
470.0
1.58
MS512PJB564MSZ
560.0
1.75
MS512PJB684MSZ
680.0
1.97
MS512PJB824MSZ
820.0
2.70
MS512PJB105MSZ 1000.0
3.20
MS512PJB155MSZ 1500.0
4.60
MS512PJB185MSZ 1800.0
5.42
MS512PJB225MSZ 2200.0
6.40
MS512PJB335MSZ 3300.0
8.90
MS512PJB475MSZ 4700.0
14.0
MS512PJB565MSZ 5600.0
16.4
MS512PJB685MSZ 6800.0
21.4
MS512PJB825MSZ 8200.0
24.0
MS512PJB106MSZ 10000.0
29.0
®
SRF
(MHz)4
min typ
39
55
34
48
26
37
20
29
18
25
17
24
17
24
11
16
9.0 13
8.4 12
7.6 10.8
7.0 10.0
6.3
9.0
5.8
8.3
5.1
7.3
4.0
5.6
3.0
4.4
2.5
3.6
2.2
3.1
2.0
2.8
1.8
2.5
1.5
2.2
1.3
1.9
1.2
1.7
1.0
1.5
0.8
1.1
0.66 0.94
0.6
0.86
0.56 0.80
0.49 0.70
0.43 0.61
10%
drop
2.6
2.5
2.3
1.9
1.9
1.7
1.6
1.3
1.1
1.0
0.90
0.46
0.46
0.44
0.37
0.31
0.26
0.22
0.20
0.17
0.16
0.14
0.12
0.11
0.090
0.080
0.070
0.070
0.070
0.062
0.059
Isat (A)5 Irms (A)6
20% 30% 20°C 40°C
drop drop rise rise
2.7
2.8
1.0
1.5
2.6
2.7
1.0
1.5
2.4
2.5
1.0
1.4
2.2
2.3
1.0
1.4
2.0
2.0
0.97 1.4
1.8
1.9
0.96 1.3
1.7
1.7
0.88 1.3
1.4
1.5
0.80 1.0
1.2
1.2
0.64 0.92
1.0
1.1
0.60 0.86
0.94 0.96 0.58 0.80
0.52 0.55 0.58 0.76
0.52 0.54 0.56 0.72
0.48 0.51 0.48 0.64
0.43 0.45 0.42 0.58
0.36 0.37 0.36 0.51
0.29 0.30 0.32 0.44
0.25 0.26 0.29 0.40
0.22 0.23 0.26 0.37
0.19 0.21 0.22 0.32
0.18 0.19 0.21 0.26
0.17 0.18 0.19 0.24
0.13 0.14 0.15 0.21
0.12 0.13 0.14 0.18
0.11 0.11 0.13 0.18
0.090 0.10 0.11 0.14
0.077 0.084 0.095 0.12
0.080 0.085 0.080 0.10
0.075 0.080 0.070 0.095
0.070 0.078 0.065 0.090
0.067 0.074 0.060 0.075
MS512PJB106MSZ
Testing: Z = COTS
H = Screening per Coilcraft
CP-SA-10001
N = Screening per Coilcraft
CP-SA-10004
2. Inductance tested at 100 kHz, 0.1 Vrms using
an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES
or equivalent.
5. Typical DC current that causes the specified
inductance drop from its value without current.
6. Typical current that causes the specified
temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information. Document MS587-1
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
1. When ordering, please specify testing code:
Phone 800-981-0363
Fax 847-639-1508
Revised 03/25/11b
E-mail [email protected]
Web www.coilcraft-cps.com
6235 POWER INDUCTORS
MS512PJB Series (6235)
Typical L vs Current
Typical L vs Frequency
10000
10000
3300 µH
1000 µH
330 µH
100 µH
100
33 µH
10 µH
10
1
0.01
1000 µH
1000
Inductance (µH)
1000
Inductance (µH)
3300 µH
0.1
330 µH
100 µH
100
33 µH
10 µH
10
1
Current (A)
10
1
0.01
1
0.1
10
Frequency (MHz)
Typical Current Derating
0.236 ±0.003*
6,00 ±0,076
120
100
90
0.236 ±0.003*
6,00 ±0,076
80
70
60
0.138 ±0.004 †
3,5 ±0,10
50
40
Recommended
Land Pattern
25°C
Percent of rated current
110
30
20
0.079
2,00
Isat
Irms
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
0.165
4,20
0.039 typ
1,00
Ambient temperature (°C)
0.260 0.167
6,60 4,25
0.165
4,20
0.071
1,80
0.079
2,00
0.167
4,25
0.260
6,60
0.039 typ
1,00
are of the case not
* Dimensions
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
† Height dimension is after mounting. For
maximum height dimension before
mounting, add 0.006 in / 0,152 mm.
Dimensions are in
®
Specifications subject to change without notice.
Please check our website for latest information.
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
inches
mm
Document MS587-2
Phone 800-981-0363
Fax 847-639-1508
Revised 03/25/11
E-mail [email protected]
Web www.coilcraft-cps.com
Similar pages