HP HDSP-F151-00016 10 mm (0.40 inch) seven segment display Datasheet

10 mm (0.40 inch) Seven
Segment Displays
HDSP-F15x Series
HDSP-F16x Series
HDSP-F20x Series
HDSP-F30x Series
HDSP-F40x Series
HDSP-F50x Series
HDSP-G00x Series
HDSP-G15x Series
HDSP-G20x Series
HDSP-G30x Series
HDSP-G40x Series
HDSP-G50x Series
Technical Data
Features
• Industry Standard Size
• Industry Standard Pinout
7.6 mm (0.3 inch) DIP Single
15.24 mm (0.6 inch) DIP Dual
Leads on 2.54 mm
(0.1 inch) Centers
• Choice of Colors
AlGaAs Red, High Efficiency
Red, Orange, Yellow, Green
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray Package Gives Optimum
Contrast
Black Surface and Color Tinted
Epoxy (HDSP-F161 only)
± 50° Viewing Angle
• Design Flexibility
Common Anode or
Common Cathode
Single and Dual Digits
Right Hand Decimal Point
± 1. Overflow Character
• Categorized for Luminous
Intensity
Yellow and Green Categorized
for Color
Use of Like Categories Yields a
Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit
String Multiplexing
• Intensity and Color
Selection Option
• Sunlight Viewable AlGaAs
Devices
AlGaAs
Red[1]
HDSP-
HER
HDSP-
Orange
HDSP-
Yellow
HDSP-
Green
HDSP-
F151
F201
F401
F301
F501
F161
Description
Package
Drawing
Common Anode Right Hand Decimal
A
Common Anode Right Hand Decimal
A
F153
F203
F403
F303
F503
Common Cathode Right Hand Decimal
B
F157
F207
F407
F307
F507
Common Anode ± 1. Overflow
C
F158
F208
F408
F308
F508
Common Cathode ± 1. Overflow
D
G151
G201
G401
G301
G501
Two Digit Common Anode
Right Hand Decimal
E
Two Digit Common Cathode
Right Hand Decimal
F
G153
G203
G403
G303
G503
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low current
operation.
2
Part Numbering System
5 0 8 2 - x xx x - x x x xx
HDSP - x xx x - x x x xx
Mechanical Options[1]
00: No mechanical option
16: Special dimensional tolerances
Color Bin Options[1,2]
0: No color bin limitation
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to respective data sheet
Package[1]
F: 10 mm (0.4 inch) Single Digit Seven Segment Display
G: 10 mm (0.4 inch) Dual Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
Description
The 10 mm (0.40 inch) LED
seven segment displays are
Agilent’s most space-efficient
character size. They are designed
for viewing distances up to 4.5
metres (15 feet). These devices
use an industry standard size
package and pinout. The dual
numeric, single numeric, and ± 1.
overflow devices feature a right
hand decimal point. All devices
are available as either common
anode or common cathode.
Typical applications include
instruments, point of sale
terminals, and appliances.
3
Package Dimensions
4
Internal Circuit Diagram
FUNCTION
FUNCTION
PIN
B
C
D
1
ANODE[1]
A
CATHODE[2]
ANODE[1]
CATHODE[2]
2
CATHODE f
ANODE f
CATHODE PLUS
ANODE PLUS
3
CATHODE g
ANODE g
CATHODE MINUS
ANODE MINUS
4
CATHODE e
ANODE e
NC
NC
5
CATHODE d
ANODE d
NC
NC
6
ANODE[1]
CATHODE[2]
ANODE[1]
CATHODE[2]
7
CATHODE DP
ANODE DP
CATHODE DP
ANODE DP
8
CATHODE c
ANODE c
CATHODE c
ANODE c
9
CATHODE b
ANODE b
CATHODE b
ANODE b
10
CATHODE a
ANODE a
NC
NC
PIN
E
1
E CATHODE NO. 1
E ANODE NO. 1
F
2
D CATHODE NO. 1
D ANODE NO. 1
3
C CATHODE NO. 1
C ANODE NO. 1
4
DP CATHODE NO. 1
DP ANODE NO. 1
5
E CATHODE NO. 2
E ANODE NO. 2
6
D CATHODE NO. 2
D ANODE NO. 2
7
G CATHODE NO. 2
G ANODE NO. 2
8
C CATHODE NO. 2
C ANODE NO. 2
9
CP CATHODE NO. 2
DP ANODE NO. 2
10
B CATHODE NO. 2
B ANODE NO. 2
11
A CATHODE NO. 2
A ANODE NO. 2
12
F CATHODE NO. 2
F ANODE NO. 2
13
DIGIT NO. 2 ANODE
DIGIT NO. 2 CATHODE
14
DIGIT NO. 1 ANODE
DIGIT NO. 1 CATHODE
15
B CATHODE NO. 1
B ANODE NO. 1
16
A CATHODE NO. 1
A ANODE NO. 1
17
G CATHODE NO. 1
G ANODE NO. 1
18
F CATHODE NO. 1
F ANODE NO. 1
NOTES:
1. REDUNDANT ANODES
2. REDUNDANT CATHODES
HOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX.
5
Absolute Maximum Ratings
AlGaAs Red
HDSPF15x/F16x
G15x Series
Description
Average Power per Segment or DP
HER/Orange
HDSPF20x/G20x/
G40x Series
Yellow
HDSPF30x/G30x
Series
Green
HDSPF50x/G50x
Series
Units
96
105
80
105
mW
Peak Forward Current per
Segment or DP
160[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per Segment
or DP
40[2]
30[4]
20[6]
30[8]
mA
Operating Temperature Range
–20 to +100[9]
°C
–40 to +100
–55 to +100
°C
Reverse Voltage per Segment or DP
3.0
V
Wavesoldering Temperature for
3 Seconds (1.59 mm [0.063 in.]
below body)
250
°C
Storage Temperature Range
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6.
7.
8.
9.
Derate above 81°C at 0.52 mA/°C.
See Figure 8 to establish pulsed conditions.
Derate above 39°C at 0.37 mA/°C.
For operation below -20°C, contact your local Agilent
components sales office or an authorized distributor.
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSPF15x/
F16x/
G15x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1, 2, 5]
(Digit Average)
IV
7.5
15.0
Forward Voltage/Segment or DP
VF
1.8
λPEAK
645
nm
Dominant Wavelength[3]
λd
637
nm
Reverse Voltage/Segment or DP[4]
VR
15
V
Peak Wavelength
3.0
Max.
2.2
Units
Test Conditions
mcd
IF = 20 mA
V
IF = 20 mA
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
320
°C/W/Seg
IR = 100 µA
6
Electrical/Optical Characteristics at TA = 25°C, continued
High Efficiency Red
Device
Series
HDSPF20x/
G20x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
420
1200
Forward Voltage/Segment or DP
VF
2.0
λPEAK
635
nm
Dominant Wavelength[3]
λd
626
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Peak Wavelength
3.0
Max.
2.5
Units
Test Conditions
µcd
IF = 5 mA
V
IF = 20 mA
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
320
°C/W/Seg
IR = 100 µA
Orange
Device
Series
HDSPF40x/
G40x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
420
1200
Forward Voltage/Segment or DP
VF
2.0
lPEAK
600
nm
Dominant Wavelength[3]
ld
603
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Peak Wavelength
3.0
Max.
2.5
Units
Test Conditions
µcd
IF = 5 mA
V
IF = 20 mA
Temperature Coefficient of
VF/Segment or DP
∆VF/°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
Rl\qJ-PIN
320
°C/W/Seg
IR = 100 µA
7
Electrical/Optical Characteristics at TA = 25°C, continued
Yellow
Device
Series
HDSPF30x/
G30x
Parameter
Symbol
Min.
Typ.
290
800
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
Forward Voltage/Segment or DP
VF
2.2
λPEAK
583
Peak Wavelength
Max.
2.5
Units
Test Conditions
µcd
IF = 5 mA
V
IF = 20 mA
nm
Dominant Wavelength[3,6]
λd
581.5
586
Reverse Voltage/Segment or DP[4]
VR
3.0
40
V
592.5
nm
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
320
°C/W/Seg
IR = 100 µA
High Performance Green
Device
Series
HDSPF50x/
G50x
Parameter
Symbol
Min.
Typ.
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
1030
3500
Forward Voltage/Segment or DP
VF
2.1
λPEAK
566
Dominant Wavelength[3,6]
λd
571
Reverse Voltage/Segment or DP[4]
VR
Peak Wavelength
3.0
Max.
2.5
Units
Test
Conditions
µcd
IF = 10 mA
V
IF = 10 mA
nm
577
nm
50
V
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
320
°C/W/Seg
IR = 100 µA
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The
category is designated by a number adjacent to the luminous intensity category letter.
8
AlGaAs Red
IDC MAX. – MAXIMUM DC CURRENT
PER SEGMENT – mA
50
RθJ-A = 770°C/W
45
AlGaAs RED
40
35
30
25
20
15
10
5
0
20 30
40 50
60
70
80
90 100 110 120
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 1. Maximum Tolerable Peak Current vs. Pulse
Duration – AlGaAs Red.
160
140
120
AlGaAs RED
100
80
60
40
20
0
0
0.5
TA – AMBIENT TEMPERATURE – °C
Figure 2. Maximum Allowable DC Current vs.
Ambient Temperature.
1.75
1.50
1.25
1.00
AlGaAs RED
0.75
0.50
0.25
0
5
10
15
20
25
30
35
1.5
2.0
2.5
3.0
3.5
4.0
Figure 3. Forward Current vs. Forward Voltage.
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
2.00
0
1.0
VF – FORWARD VOLTAGE – V
40
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 4. Relative Luminous Intensity vs. DC
Forward Current.
1.4
1.2
1.0
0.8
AlGaAs RED
0.6
0.5
1.0
2.0 5.0 10.0 20.0 50.0 150.0
30.0 100.0
3.0
500.0
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 5. Relative Efficiency (Luminous Intensity
per Unit Current) vs. Peak Current.
9
HER, Orange, Yellow, Green
Figure 6. Maximum Tolerable Peak Current vs.
Pulse Duration – HER, Orange.
Figure 7. Maximum Tolerable Peak Current vs.
Pulse Duration – Yellow.
Figure 8. Maximum Tolerable Peak Current
vs. Pulse Duration – Green.
Figure 9. Maximum Allowable DC Current
vs. Ambient Temperature.
Figure 10. Forward Current vs.
Forward Voltage Characteristics.
Figure 11. Relative Luminous Intensity
vs. DC Forward Current.
Figure 12. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak
Current.
10
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-F15x/F16x/G15x
IV Bin Category
Min.
L
8.67
M
13.00
N
19.50
O
29.30
P
43.90
Color Categories
Max.
15.90
23.80
35.80
53.60
80.50
HER/Orange
HDSP-F20x/G20x/F40x/G40x
IV Bin Category
Min.
Max.
C
0.485
0.890
D
0.728
1.333
E
1.091
2.000
F
1.636
3.000
G
2.454
4.500
H
3.682
6.751
Color
Yellow
Green
Bin
1
3
2
4
2
3
4
5
Dominant Wavelength (nm)
Min.
Max.
581.50
585.00
584.00
587.50
586.50
590.00
589.00
592.50
573.00
577.00
570.00
574.00
567.00
571.00
564.00
568.00
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
Yellow
HDSP-F30x/G30x
IV Bin Category
Min.
C
0.297
D
0.445
E
0.669
F
1.003
G
1.504
H
2.256
Contrast Enhancement
Max.
0.543
0.817
1.225
1.838
2.758
4.137
Green
IV Bin Category
H
I
J
K
L
HDSP-F50x/G50x
Min.
1.54
2.31
3.46
5.18
7.78
Max.
2.82
4.23
6.34
9.50
14.26
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For further information on
soldering LEDs, please refer to
Application Note 1027.
11
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2005 Agilent Technologies, Inc.
Obsoletes 5988-2222EN
February 2, 2005
5989-2346EN
Similar pages