Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories NETWORKING OUTSIDE PLANT PRODUCTS COMLINE™ OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES SPEC-00215 M63.422.2661 7 763.422.2588 COMLINE™ OSP PACKAGE, TYPE 4X (S-102911) Rack Mount devices shown not included INDUSTRY STANDARDS • UL 508A Listed; Type 3, 3R, 4, 4X, 12; File No. E61997 CSA: Type 3, 3R, 4, 4X, 12 NEMA/EEMAC Type 3, 3R, 4, 4X, 12 EC60529, IP66 Designed to meet Telcordia NEBS™ GR-487, GR-63 and IEC 48D EIA 310-D with 19 in. spacing for rack equipment Meets BICSI TDMM, Tenth Edition, Chapter 7, Telecommunication Enclosures (TE) Cabinet is RoHS compliant NEBS is a trademark of Telcordia APPLICATION A complete, off-the-shelf package for 19-in. rack equipment, lightweight COMLINE™ OSP Wall-Mount Cabinets are constructed of corrosion-resistant aluminum with a foam-in-place gasket that secures and protects sensitive equipment in outdoor applications. Available with or without back-up battery compartment. FEATURES • • • • olar shield helps keep enclosure interior cool when cabinet is S installed outdoors and directs liquids away from cabinet opening; can be removed for indoor installations Foam-in-place gasket provides environmental seal P adlocking L-Handle provides a tight, secure door seal Doorstop holds door in place during service for easier and faster maintenance • • • • • • • • Custom cabinet shown eavy-duty hinged door is easily removed to facilitate equipment H installation and removal. Maximum door load 50 lb. (22.7 kg) Rack angles adjustable front-to-rear of cabinet Gland plates available with cutouts that fit Hoffman T15, T20 and CR23 air conditioners and Hoffman XR20 and XR29 heat exchangers (Indoor use only) Radius corners on cabinet eliminate sharp edges Stainless steel fasteners resist corrosion to maintain professional appearance Pole mounting kits available for all sizes P ad mounting plinth available for 600mm deep cabinets Battery compartment has front vented captivated door. Note – SR20 and SR29 are for indoor use only. SPECIFICATIONS • • • • ack angles have EIA universal standard square hole spacing R Eighth-inch thick, depending on cabinet size S eams continuously welded and ground smooth for a finished appearance Body includes studs for ground bar and rear mounting studs for wood panel FINISH RAL 7035 light-textured low-gloss polyester urethane powder coating over iron-phosphate-treated surface. Custom finishes available: consult your local Hoffman sales office. BULLETIN: DCOM Standard Product COMLINE Wall-Mount Enclosure Packages Catalog Number ECL606050P ECL906050P ECL907060P ECL1207060P AxBxC in. 23.62 x 23.62 x 19.68 35.43 x 23.62 x 19.68 35.43 x 27.56 x 23.62 47.24 x 27.56 x 23.62 AxBxC mm 600 x 600 x 500 900 x 600 x 500 900 x 700 x 600 1200 x 700 x 600 P ( in.) 17.47 30.47 30.47 30.47 P (mm) 444 774 774 774 Rack Units 12 18 18 25 Standard Product COMLINE with Battery Compartment Catalog Number ECL606050PB ECL906050PB ECL907060PB ECL1207060PB 1 Networking AxBxC in. 38.62 x 23.62 x 19.69 50.43 x 23.62 x 19.69 50.43 x 27.56 x 23.62 62.24 x 27.56 x 23.62 AxBxC mm 981 x 600 x 500 1281 x 600 x 500 1281 x 700 x 600 1581 x 700 x 600 SUBJECT TO CHANGE WITHOUT NOTICE Rack Units 12 18 18 25 EQUIPMENT PROTECTION Spec-00215 M Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories Accessory Compatibility ECL606050P/B Catalog Numbers GLAND PLATES EGPS1 EGPS2 EGPACT15 EGPACT20 EGPACCR15 EGPHX20 EGPHX29 POLE MOUNT CHANNELS EPMC6 EPMC9 EPMC12 PLINTH BASE EPL7060 WOOD PANELS E60P60W E90P60W E90P7W E120P70W RACK ANGLES ERA196S ERA199S ERA19239S ERA192312S • • • ECL906050P/B ECL907060P/B ECL1207060P/B • • • • • • • • • • • • • • • • • • • • • • • • • • • • &20/,1(2633DFNDJH:LWKRXW%DWWHU\&RPSDUWPHQW & << % $ == EQUIPMENT PROTECTION Spec-00215 M & % % < = < & $ 3 = PH 763.422.2661 • FAX 763.422.2588 • HOFFMANONLINE.COM ; Networking 2 Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories &20/,1(2633DFNDJH:LWK%DWWHU\&RPSDUWPHQW & << & % % < $ & = < & % $ ; $ % = == 9HUWLFDO 3ROH 0RXQWLQJ &KDQQHO :DOO0RXQWLQJ %UDFNHW :RRG 3DQHO 5DFN $QJOHV *URXQG %XVV 3 Networking *ODQG 3ODWH 3OLQWK %DVH SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00215 M Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories RACK ANGLES (S-102970) Rack Angles are made of 12 gauge, self-grounding plated steel and are grounded to the cabinet body through the mounting bolts. Square mounting holes meet EIA standard. Package includes one pair. Catalog Number ERA196S ERA199S ERA19239S ERA192312S Rack Width 19 19 19 or 23 19 or 23 Rack Units 12 18 18 25 Use with Cabinet (Height x Width in mm) 600 x 600 900 x 600 900 x 700 1200 x 700 BULLETIN: DCOMY VERTICAL POLE-MOUNT CHANNEL (S-102986) Vertical Pole-Mount Channel facilitates pole-mounting the COMLINE™ package. It includes the bracket and hardware to mount the channel to the cabinet. No drilling into cabinet required to install. Catalog Number EPMC6 EPMC9 EPMC12 Description Vertical Pole-Mount Channel 600 Vertical Pole-Mount Channel 900 Vertical Pole-Mount Channel 1200 Use with Cabinet 600-mm tall 900-mm tall 1200-mm tall BULLETIN: DCOMY WOOD PANEL (S-102995) Wood Panels are made of 3/4-in. plywood, pre-cut and pre-drilled to install on panel mounting studs in the rear of the cabinet. BULLETIN: DCOMY GLAND PLATE (S-102998) Gland Plates are made of .100-in.-thick aluminum, finished to match the cabinet. They include a factory-installed foam-in-place gasket, stainless steel hardware and grounding provision. The installed gland plate maintains the cabinet rating. Package includes solid gland plate. BULLETIN: DCOMY Height x Width 524 x 524 824 x 524 824 x 624 1124 x 624 Catalog Number E60P60W E90P60W E90P70W E120P70W Catalog Number EGPS1 EGPS2 EGPACT15 EGPACT20 EGPACCR23 EGPHX20 EGPHX29 Description Solid small Solid large AC cutout for T15 AC cutout for T20 AC cutout for CR23 Heat exchanger cutout for XR20 Heat exchanger cutout for XR29 Use with Cabinet (Height x Width) 600 x 600 900 x 600 900 x 700 1200 x 700 Nominal Height x Width (P x Q) 506 x 381 838 x 381 506 x 381 838 x 381 838 x 381 838 x 381 838 x 381 XR20 and XR29 indoor use only. PLINTH BASE (S-103000) The Plinth Base enables pad mounting and provides additional cable management space. It adds an additional 5.00-in. (127-mm) height to the cabinet. The base is made of aluminum painted RAL 7035 light gray. Catalog Number EPL7060 Description Plinth base Use with Cabinet (Width x Depth) 700 x 600 BULLETIN: DCOMY GROUND BUSS (S-103002) This copper Ground Buss provides wiring tie points within the cabinet. Mounts on studs provided on cabinet side. Tie-point spacing is 3/4-in. pair-to-pair and 5/8-in. across each pair. Ground studs are 1/4-20 x .75-in. on 3/4-in. centers. Catalog Number EGBB1 EGBB2 Description 6-position, double-lug buss 12-position, double-lug buss Catalog Number ELHP EPL4 DL36 Description Padlocking L-Handle Padlocking quarter-turn with key Locking wing nut with 2 keys, silver finish BULLETIN: DCOMY HANDLE OPTIONS (S-3140) Handle Options can be padlocked for added security. Kit includes handle and mounting hardware. Install using existing enclosure cam. BULLETIN: A80, DCOMY, DWS12 EQUIPMENT PROTECTION Spec-00215 M PH 763.422.2661 • FAX 763.422.2588 • HOFFMANONLINE.COM Networking 4 Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories CLIP NUT PACKAGE (S-3495) Twenty plated clip nuts fit all rack-mounting angles with .281-in. (7-mm) diameter holes (throughhole type). Catalog Number AN1032 ANM5 Description Clip Nut 10-32 Clip Nut M5 (Metric) Pkg. Qty. 20 20 Fits .281-diameter mounting holes .281-diameter mounting holes BULLETIN: A80 SCREW PACKAGE (S-3141) Screws attach rack panels and rack-mounted equipment to rackmounting angles. BULLETIN: A80, DACCY, X20 Catalog Number ES1224 ES1224250 ES1224B ES1224B250 ASM5 ASM6 ASM5T ASM6250 AS1032 AS1032250 AS1032B Color Silver Silver Black Black Silver Silver Silver Silver Silver Silver Black Description 12-24 x 5/8 in. combo head 12-24 x 5/8 in. combo head 12-24 x 5/8 in. combo head 12-24 x 5/8 in. combo head M5 x 20 mm Combo Head M6 x 16 mm combo head M5 x 12 mm thread-forming Phillips hex head screws M6 x 16 mm combo head 10-32 x 5/8 in. combo head 10-32 x 5/8 in. combo head 10-32 x 5/8 in. combo head Pkg. Qty. 20 250 20 250 20 20 20 250 20 250 20 Use ASM5T on PROLINE™ frame or Net Series extruded holes. MOUNTING BRACKET KITS (S-3142) Mounting Bracket Kits are available in stainless steel or composite material. Kit includes 4 brackets and mounting hardware. BULLETIN: A80 Catalog Number CMFK CMFKSS CMTGFT Description Steel Stainless Steel Composite WALL MOUNTING BRACKET (S-301711) Wall Mounting Bracket bolts to enclosure back thread holes and facilitates easy mounting to walls. Made of 0.10 aluminum with cabinet matching RAL 7035 finish. Catalog Number EMB1 AxBxC in./mm 1.73 x 30.20 x 21.26 44 x 767 x 540 Description Aluminum BULLETIN: DCOMY 5 Networking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00215 M Outside Plant Products COMLINE™ OSP Wall-Mount Cabinet Package and Accessories Notes EQUIPMENT PROTECTION Spec-00215 M PH 763.422.2661 • FAX 763.422.2588 • HOFFMANONLINE.COM Networking 6