EPCOS B32330B1126J010 Film capacitors - ac capacitor Datasheet

Film capacitors – AC capacitors
Motor run capacitors
250 V; class B; 85 °C
Series/Type:
B32330/B32332 – MotorCap™
Ordering code:
Date:
Version:
July 2007
1.0
Content of inside pages of data sheet. Data will be automatically entered into headers and footers.
Please fill in the table and then change the colour to “White”. This ensures that the table disappears
for the customer pdf.
Identification/Classification 1:
(header 1)
Film capacitors – AC capacitors
Identification/Classification 2:
(header 2)
Motor run capacitors
Ordering code:
Series/Type:
B32330/B32332 – MotorCap™
Preliminary data (optional):
(if necessary)
Department:
FK PC PM AC
Date:
July 2007
© EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – AC capacitors
Motor run capacitors
B32330/B32332 – MotorCap™
Construction
„ Dielectric: polypropylene film
„ Aluminum can
„ Soft polyurethane resin
Features
„
„
„
„
„
„
Self-healing properties
Low dissipation factor
Overpressure disconnection device
Highest safety level P2 to IEC 60252-1 2001-02
High insulation resistance
Capacitor C US UL files E106388
Typical applications
„ For general sine wave applications,
mainly as motor run capacitor
Terminals
„ B32330 – single fast-on: 6.3 × 0.8 mm
„ B32332 – double fast-on: 6.3 × 0.8 mm
Mounting parts (optional)
„ Threaded stud at bottom of can (M8; max. torque = 5 Nm)
Technical data and specifications
Reference standards
IEC 60252-1 2001-02
EN 60252 2001
UL 810
Safety class to IEC 60252-1 2001-02
P2
Life expectancy to IEC 60252 2001
250 V: 10,000 h (class B)
UL 810 file E106388
Approved component 10000 AFC
Rated capacitance CR
See dimensions table
Tolerance
±5%
Rated voltage VR
250 V
Rated frequency fR
50/60 Hz
FK PC PM AC
Please read the important notes,
cautions and warnings.
July 2007
Page 2 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32330/B32332 – MotorCap™
Maximum ratings
Maximum permissible voltage Vmax
1.1 · VR
(VR = rated voltage)
Maximum permissible current Imax
1.3 · IR
(IR = rated current)
Test data
AC test voltage terminal to terminal VTT
2 · VR, 2 s (routine test)
2 · VR, 60 s (type test)
Insulation voltage terminals to case
2,000 V AC, 60 s (type test)
2,000 V AC, 2 s (routine test)
Insulation resistance Rins or time constant τ
at 20 °C; rel. humidity ≤ 65%
(minimum as-delivered values)
3,000 s
Dissipation factor tan δ at 20 °C
≤ 1,0 · 10-3 (120 Hz)
Maximum rate of voltage rise dV/dtmax
10 V/μs
Climatic data
Climatic category
25/085/21 to IEC 60068-1
Lower category Tmin
–25 °C
Upper category Tmax
+85 °C
Damp heat test ttest
21 days
Mechanical and electrical properties of terminal top disk material
Ball pressure test to IEC 60309-1 sec. 27.3
at 125°C
Top disk material
Option A:
„ UL 94 V2 compatible
Self-extinguish within 30 seconds of
withdrawing glow wire
„ Glow wire test to IEC 60695-2-11
Test temp 550 °C for IR ≤ 0.5 A
Test temp 850 °C for IR > 0.5 A
Option B:
„ UL 94 V2/V0 compatible
„ Glow wire test to IEC60335-1 & IEC 60695-2-11
Test temp 550 °C / 750 °C
Self-extinguish within 2 seconds of
withdrawing glow wire
„ Part is compatible to EN 60335-1
Tracking test to IEC 60112 solution A
> 250 V
Compatibility to RoHS
Compliance to directive 2002/95/EC
FK PC PM AC
Please read the important notes,
cautions and warnings.
July 2007
Page 3 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32330/B32332 – MotorCap™
Dimensional drawings B32330/B32332
A
13
16 max.
d±1
±2
Marking
After Safety
Device Operation
L
Marking
Before Safety
Device Operation
M8 for ø30-53 mm
M12 for ø63.5 mm
According to DIN 6797-A
According to DIN 934
M 8 bolt:
M 12 bolzt:
KMK1156-A-E
L = 12 mm
L = 16 mm
A = 5 mm for diameters d =30, 35, 40, 45 mm
A = 0 mm for diameters d = 50, 53, 63.5 mm
FK PC PM AC
Please read the important notes,
cautions and warnings.
July 2007
Page 4 of 6
Film capacitors – AC capacitors
Motor run capacitors
B32330/B32332 – MotorCap™
Ordering codes and packing units
VR
CR
Max. dimensions
dxl
V AC
μF
mm
250
Ordering code
Packing units
4
30 × 68
B3233*B1405J0#0
150
5
30 × 68
B3233*B1505J0#0
150
6
30 × 68
B3233*B1605J0#0
150
7
30 × 68
B3233*B1705J0#0
150
8
30 × 68
B3233*B1805J0#0
150
10
30 × 68
B3233*B1106J0#0
150
12
30 × 68
B3233*B1126J0#0
150
15
35 × 68
B3233*B1156J0#0
50
20
35 × 68
B3233*B1206J0#0
50
25
35 × 78
B3233*B1256J0#0
50
30
40 × 78
B3233*B1306J0#0
50
35
40 × 78
B3233*B1356J0#0
50
40
40 × 78
B3233*B1406J0#0
50
45
40 × 78
B3233*B1456J0#0
50
50
40 × 103
B3233*B1506J0#0
50
55
40 × 103
B3233*B1556J0#0
50
60
40 × 103
B3233*B1606J0#0
50
Composition of ordering code:
*: terminals
0 – single fast-on terminals
2 – double fast-on terminals
#: construction of can and plastic top
5 – aluminum can, Option A: UL 94 V2 top
6 – aluminum can, Option B: UL 94 V2/V0 top/IEC 60335-1
7 – aluminum can with M 8 bolt, Option A: UL 94 V2 top
8 – aluminum can with M 8 bolt, Option B: UL 94 V2/V0 top/IEC 60335-1
U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the Internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to
prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are
kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC
Please read the important notes,
cautions and warnings.
July 2007
Page 5 of 6
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,
PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
FK PC PM AC
July 2007
Page 6 of 6
Similar pages