Optoway BTRS-7700CMG 1550 nm tx / 1310 nm rx , 3.3v / 1250 mbps rohs compliant single-fibermm transceiver Datasheet

Optoway
BTRS-7700MG
1
***********************************************************************************************************************************************************************
BTRS-7700MG / BTRS-7700CMG / BTRS-7700AMG / BTRS-7700ACMG
1550 nm TX / 1310 nm RX , 3.3V / 1250 Mbps RoHS Compliant Single-Fiber MM Transceiver
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
The BTRS-7700MG series is high performance module for
multi-mode single fiber communications by using 1550 nm
transmitter and 1310 nm receiver. The transmitter section
uses a multiple quantum well laser and is a class 1 laser
compliant according to International Safety Standard
IEC-60825. The receiver section uses an integrated 1310
nm detector preamplifier (IDP) mounted in an optical
header and a limiting post-amplifier IC. A PECL logic
interface simplifies interface to external circuitry. LV-TTL
Signal Detect is used.
Single Fiber Bi-Directional MMTransceiver
1550 nm Transmitter
1310 nm Receiver
Distance 0 to 500 m
0 to 70oC Operating: BTRS-7700MG
-20 to 85oC Operating: BTRS-7700AMG
Speed up to 1300 Mbps
2x5 Package with SC Receptacle
LVTTL Signal Detect Output : BTRS-7700CMG
LVPECL Signal Detect Output : BTRS-7700MG
Single +3.3 V Power Supply
RoHS Compliant
PECL Differential Inputs and Outputs
Wave Solderable and Aqueous Washable
Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
l WDM Gigabit Ethernet Links
l SONET/SDH Equipment Interconnect
l Fiber Channel Links
ORDER INFORMATION
P/No.
BTRS-7700MG
BTRS-7700AMG
Bit Rate Distance
(Gb/s)
(m)
1.25
1.25
0 to 500
0 to 500
TX
(nm)
RX
(nm)
Voltage
(V)
Package
Temp
(oC)
1550
1550
1310
1310
3.3
3.3
SC, 2X5
SC, 2X5
0 to 70
-20 to 85
TX
RX Sens. RoHS
Power
(dBm) Compliant
(dBm)
-4 to -10
-17
Yes
-4 to -10
-17
Yes
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Tstg
Topr
Soldering Temperature
Power Supply Voltage
Input Voltage
--Vcc
---
Output Current
Iout
Min
-40
0
-20
Units
o
C
o
C
0
GND
Max
85
70
85
260
3.6
Vcc
0
30
mA
Min
3.13
0
-20
Typ
3.3
o
C
V
V
Notes
BTRS-7700MG
BTRS-7700AMG
10 seconds on leads only
Recommended Operating Conditions
Parameter
Power Supply Voltage
Operating Temperature
Symbol
Vcc
Topr
Data Rate
Power Supply Current
Icc
1250
Max
3.47
70
85
1300
260
Units / Notes
V
o
C / BTRS-7700MG
o
C / BTRS-7700AMG
Mb/s
mA
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw
10/1/2009 V3.0
Optoway
BTRS-7700MG
2
**********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)
Parameter
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Output Eye
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
Total Jitter
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
Symbol
Min
Typ
Po
-10
1480
λ
σλ
Compliant with IEEE 802.3z
tr
tf
RIN
TJ
IIL
IIH
VIH - VIL
VIL - VCC
VIH - VCC
V TDIS,L
V TDIS,H
tDIS
Max
Units
Notes
-4
1580
4
dBm
nm
nm
1
0.26
0.26
-120
0.227
ns
ns
dB/Hz
ns
350
1600
-1.58
-0.74
0.8
Vcc
1
µA
µA
mV
V
V
V
V
ms
-350
300
-2.0
-1.1
0
Vcc – 1.3
RMS (σ)
20% to 80% Values
20% to 80% Values
2
3
3
TX Output Enabled
TX Ouput Disabled
Notes: 1. Output power is power coupled into a 62.5/125 µm multi-mode fiber.
2. Measured with a 27-1 PRBS.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V)
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
Electrical
Data Output Voltage Swing
SD Output Voltage -- Low
SD Output Voltage -- High
SD Output Voltage -- Low
SD Output Voltage -- High
Signal Detect Assert Time
Signal Detect Deassert Time
Symbol
Min
Typ
Max
Units
Notes
--Pin
Pa
Pd
---3
---31
1.0
1260
20
-----------
-17
---17
---
dBm
dBm
dBm
dBm
dB
nm
dB
1
ORL
V OH – VOL
VOL - VCC
VOH - VCC
VOL
VOH
ASMAX
ANSMAX
0.575
-2.0
-1.1
0
2.0
1360
0.930
-1.58
-0.74
0.8
Vcc+0.3
100
300
V
V
V
V
V
µs
µs
Transition: low to high
Transition: high to low
2
BTRS-7700MG
BTRS-7700CMG
OFF to ON
ON to OFF
Notes: 1. Minimum sensitivity and saturation levels at BER 1E-12 for a 27-1 PRBS.
2. At least 30 dB optical isolation for the wavelength 1480 to 1580 nm.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
E-mail: [email protected]
Fax: 886-3-5979737
http: // www.optoway.com.tw 10/1/2009 V3.0
Optoway
BTRS-7700MG
3
**********************************************************************************************************************************************************************
CONNECTION DIAGRAM
PIN
1
2
3
4
5
6
7
8
Symbol
VEEr
VCC r
SD
RD−
RD+
VCC t
VEEt
TxDis
9
10
MS
TD+
TDMS
Notes
Directly connect this pin to the receiver ground plane
+3.3V dc power for the receiver section
Active high on this indicates a received optical signal.
Receiver Dataout Bar. See recommended circuit schematic
Receiver Dataout. See recommended circuit schematic
+3.3V dc power for the transmitter section
Directly connect this plan to the transmitter ground plane
Transmitter Disable. Connect this pin to +3.3V TTL logic “1” to disable module
To enable module connect to TTL logic low “0”
Transmitter Data In. See recommended circuit schematic
Transmitter Data In Bar. See recommended circuit schematic
Mounting Studs. Connect to Chassis Ground
RECOMMENDED CIRCUIT SCHEMATIC
depend on customer's PHY
Vcc3.3V
terminate and bias inside Transceiver module
TDZ=50R
LVPECL
TD+
Z=5OR
10
9
8
7
6
130R
10nF
130R
Vcc3.3V
1uH
TDTD+
TDis
Veet
Vcct
TXDis(LVTTL)
10nF
10uF
10uF
PHY DEVICE
Veer
Vccr
SD
RDRD+
1uH
1
2
3
4
5
BTRS-7XXXC
10nF
Vcc3.3V
10uF
RD+
100R
LVPECL
Z=50R
RDZ=5OR
depend on customer's PHY
SD
TO LVTTL STAGE
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: [email protected] http: // www.optoway.com.tw 10/1/2009 V3.0
Optoway
BTRS-7700MG
4
**********************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
E-mail: [email protected]
Fax: 886-3-5979737
http: // www.optoway.com.tw 10/1/2009 V3.0
Similar pages