Kemet ERP610W392 Radial leaded ceramic disc capacitor Datasheet

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated,
X1 760 VAC/Y1 500 VAC (Industrial Grade)
Overview
KEMET’s ERO610 series encapsulated radial leaded
ceramic disc capacitors are specifically designed for
interference-suppression AC line filtering applications. Having internationally recognized safety certifications, these
capacitors are well-suited for applications that require
keeping potentially disruptive or damaging line transients
and EMI out of susceptible equipment. They are also an
ideal solution when needing to suppress line disturbances
at the source.
With a working voltage of 760 VAC in line-to-line (Class X)
and 500 VAC in line-to-ground (Class Y) applications, these
safety capacitors meet the impulse test criteria outlined in
IEC Standard 60384. Meeting subclass X1 and Y1 requirements, these devices are certified to withstand impulses up
to 4 KV (X1) and 8 KV (Y1) respectively. These encapsulated
devices also meet the flame test requirements outlined in UL
Standard 94V-0.
Safety Certified Capacitors are classified as either X and/
or Y capacitors. Class X capacitors are primarily used in
line-to line (across-the-line) applications. In this application
there is no danger of electric shock to humans should the
capacitor fail, but could result in a risk of fire. The class Y
capacitor is primarily used in line-to-ground (line by-pass)
applications. In this application, failure of the capacitor
could lead to danger of electric shock.
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
ERP610
W
102
M
DF0
Ceramic
Series
Voltage Rating
(Safety Subclass Rating)
Capacitance
Code (pF)
Capacitance
Tolerance
Lead configuration /
Packaging Code
ERP610
W = X1 760 VAC/Y1 500 VAC
Two significant digits and Number
of zeroes
K = ±10%
M = ±20%
*See Packaging Options
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
1
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Packaging C-Spec Ordering Options Tables
Bulk Packaging1
LEAD LENGTH L
LEAD DIAMETER D
0.6 mm
0.8 mm
0.6 mm
0.8 mm
0.6 mm/0.8 mm
0.6 mm
0.8 mm
0.6 mm
0.8 mm
0.6 mm
0.8 mm
0.6 mm
0.8 mm
30 mm - 3 mm
Straight leads
10 mm ± 1 mm
6 mm - 1 mm
Preformed leads inside crimp
30 mm - 3 mm
Preformed leads outside crimp
5 mm ± 1 mm
Preformed leads snap-in
Inline wire
1
Minimum 2.8 mm
Minimum 3.5 mm
Minimum 2.8 mm + 1.5 mm
Minimum 3.0 mm + 2.0 mm
LEAD SPACING F
10 mm
DF0
DJ0
DD0
DH0
DB0
TE0
TF0
YE0
YF0
12.5 mm
EF0
EJ0
ED0
EH0
EB0
EFG
EJG
TG0
TH0
QG0
QH0
YG0
YH0
5 mm and 7 mm lead spacing options are not available for ERP610 Series.
Reel Packaging Component Pitch 25.4 mm1
TAPING F
Lead spacing F
10 mm
Body diameter D
1
12.5 mm
All diameters
Straight leads
H = 16.5 mm
H = 18.0 mm
H = 20.0 mm
DRT
DRU
DRY
ERT
ERU
ERY
Preformed leads inside crimp
H0 = 16.0 mm
–
ERZ
Preformed leads outside crimp
H0 = 16.0 mm
TDR
TER
Inline wire
H0 = 16.0 mm
YRD
YRE
5 mm and 7 mm lead spacing options are not available for ERP610 Series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
2
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Benefits
•
•
•
•
•
•
•
•
•
•
•
Safety Standard Recognized (IEC 60384-14)
Reliable operation up to 125°C
Class X1/Y1
10 mm and 12.5 mm lead spacing
RoHS compliant
Capacitance offerings ranging from 33 pF up to 4.7 nF
Available capacitance tolerances of ±10% and ±20%
High reliability
Preformed (crimped) or straight lead configurations
Non-polar device, minimizing installation concerns
Encapsulation meets flammability standard UL 94V-0
Applications
Typical applications include line-to-Line (Class X) filtering, line to-ground (Class Y) filtering, antenna coupling, primary and
secondary coupling (switching power supplies) and line disturbances suppression (motors and motor controls, relays,
switching power supplies and invertors).
Approval Standard and Certification Number
Safety Standard
Specification
Certificate Number
VDE
EN 132400
40001993, 40001996
UL
CAN/CSA
UL 60384–14 and
E60384–14
E356389
These devices are VDE/ENEC recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications per IEC60384–14.
Environmental Compliance
These devices are RoHS Compliant. They meet all requirements set forth by both EU and China RoHS directives.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
3
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Lead Configurations
Straight Leads
Фd
L
F
e
5
0.6 or 0.8
30 - 3 or 10 ± 1
7.5
10
3.0 mm Maximum
Inside Kink
12.5
Фd
F
A
L
Snap-In Leads
Фd
F
L
H
P1
P2
A
0.6
7.5 / 10 / 12.5
0.8
7.5 / 10 / 12.5
3.5 mm
2.8 mm Minimum
Minimum
2.6
3.3
1.25
1.65
1.65
1.95
D - 8: 6.0 ± 1.5 D > 8: 7.0 ± 1.5
Outside Kink
0.6 or 0.8
7.5
10
12.5
4.0 ± 1.5
5.0 ± 1.5
6.0 ± 1.5
3.0 mm Minimum
Tolerance: 1.0 mm absolute
Фd
0.6
0.6 or 0.8
F
5.0
7.5
7.5
10.0
12.5
A
5.0
5.0
6.0
6.0
6.0
Vertical Crimp
F
7.5
10
12.5
D
0.6
0.8
0.8
4.5
Maximum
2.8
Minimum
1.5
absolute
6.0
Maximum
3.0
Minimum
2.0
absolute
6.0
Maximum
3.0
Minimum
2.0
absolute
A
L
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
4
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
General Specifications/Performance Characteristics
Dielectric/Temperature Characteristic
U2J
Y5S
Operating Temperature Range:
Capacitance Change with Reference to +25°C
and 0 VDC Applied (TCC):
Y5T
Y5U
+22%/−33%
22%/−56%
−40°C to +125°C
−750 ±120 ppm/ºC
±22%
Component test:
4,000 VAC, 50 Hz, 2 seconds
As repeated test admissible only once with
4,000 VAC, 50 Hz, 60 seconds
Random sampling test (destructive test):
4,000 VAC, 50 Hz, 60 seconds
Test Voltage Between Terminals
Dielectric Strength of Body Insulation
4,000 VAC, 50 Hz,60 seconds (destructive test)
Dissipation Factor (tanδ) at +25ºC1
0.50%
1
2.50%
10,000 MΩ Minimum
(500 VDC applied for 60±5 seconds at 25°C)
Insulation Resistance (IR) Limit at +25°C
*C = Nominal capacitance
Capacitance and Dissipation Factor (DF) measured under the following conditions:
U2J: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms
Y5S, Y5T and Y5U: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms
Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
1
Table 1 – Product Ordering Codes and Ratings
Dielectric/
Temp.
Char.
U2J
Y5S
Y5T
Y5U
Dimensions (mm)
KEMET
Part Number
Capacitance
ERP610W330
ERP610W470
ERP610W680
ERP610W101
ERP610W151
ERP610W221
ERP610W331
ERP610W471
ERP610W681
ERP610W102
ERP610W152
ERP610W222
ERP610W272
ERP610W332
ERP610W392
ERP610W472
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1000 pF
1500 pF
2200 pF
2700 pF
3300 pF
3900 pF
4700 pF
±10%
±20%
Capacitance
Capacitance
Tolerance
KEMET
Part Number
Capacitance
Tolerance
Body
Diameter
(Maximum)
8.0
9.0
10.0
12.0
13.0
Body
Thickness
(Maximum)
Lead Spacing
Lead
Diameter
Bulk
Packaging
Ammo
Packaging
6.0
0.6
0.8
10
12.5
Lead Diameter
Lead Spacing
5.0
15.0
17.0
Body Diameter
(Maximum)
Body Thickness
(Maximum)
(1) To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for
available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
5
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
6
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Soldering and Mounting Information
Soldering Specifications
Soldering Temperature
235°C ± 5°C
Resistance to Soldering
Heat
260°C ± 5°C
Solder Duration
2 seconds ± 0.5 seconds
10 seconds ± 1.0 seconds
Distance from
component body
≥ 2 mm
≥ 5 mm
CSA (cUL recognition)
C 22.2 No. 1-M90 (Ur=250 VAC)
216038
Solderability
Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method)
Sodering Recommendations
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor.
Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may
result in thermal shocks that can crack the ceramic element.
Cleaning Recommendations
The components should be cleaned immediately following the soldering operation with vapor degreasers.
Marking
Front
EVOX RIFA
Trademark1
IEC 60384-14 Marking
Capacitor Class
and Rated Voltage
Series Name
Back
Approval
Markings
Capacitance
Tolerance Code
(1 Character)
EVOX RIFA
Trademark1
Rated
Capacitance
(3 Characters)
Rated Capacitance
(3 Characters)
1
Series Name
Capacitor
Class and
Rated Voltage
Capacitance
Tolerance Code
(1 Character)
EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
7
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Figure 1 - Ammo Pack Taping Format
TAPING P/T/U
COMPONENT PITCH 0.5 inch
LEAD SPACING 5.0 mm
TAPING P/T/U
COMPONENT PITCH 0.5 inch
LEAD SPACING 7.5 mm
TAPING F
COMPONENT PITCH 1.0 inch
LEAD SPACING 5.0 mm, 7.5 mm, 10.0 mm, and 12.5 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
.
C1085_ERP610 • 9/13/2016
8
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Table 3 – Ammo Pack Taping Specifications
Lead Style
Item
TAPING P
TAPING T
Symbol
TAPING U
TAPING F
Dimensions(mm)
Pitch of component
P
12.7±1
25.4±1
Pitch of sprocket hole
P0
12.7±0.3
12.7±0.3
Distance, hole to lead
P1
3.85±0.7
(0.5F) ±0.7
Distance, hole to center of component
P2
6.35±1.3
12.7±1.3
F
5.0/7.5+0.8/−0.2
5/7.5/10/12.5±0.8
Average deviation across tape
∆h
±2.0 Maximum
±3.0 Maximum
Average deviation in direction of reeling
∆p
±1.3 Maximum
±1.3 Maximum
Carrier tape width
W
18.0+1/−0.5
18.0+1/−0.5
Hold-down tape width
W0
6
6
Position of sprocket hole
W1
9.0+0.75/−0.5
9.0+0.75/−0.5
Distance of hold-down tape
W2
3.0 Maximum
3.0 Maximum
Lead spacing
Distance between the abscissa and the
bottom place of the component body
(straight leads)
H
Distance between the abscissa and the
bottom place of the component body
(kinked leads)
H0
16.0±0.5
16.0±0.5
L
11.0 Maximum
11.0 Maximum
D0
4.0±0.2
4.0±0.2
t
0.9 Maximum
0.9 Maximum
Length of cut leads
Diameter of sprocket hole
Total tape thickness
16.5±0.5
18.0+2/−0
20±1
16.5±0.5
18.0+2/−0
20.0±1
Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"
sections of this document for further details.
2
Also referred to as "lead length" in this document.
1
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
9
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
KEMET Electronic Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016
10
Similar pages