Cooper NNB Heb breakaway and non-breakaway in-line fuse holders for ul 13/32â x 1-1/2â supplemental fus Datasheet

Effective December 2015
Supersedes October 2015
Technical Data 2127
BUSSMANN
SERIES
HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2”
supplemental fuses
that fuses are sized at a minimum of 200% of
the RMS load current.
Use these part numbers to order insulating
boots for a non-breakaway HEB holder:
Catalog Symbol: HEB*
Description:
The Bussmann® series of HEB submersible,
single-pole in-line fuse holders for UL 13/32” x
1-1/2” supplemental fuses. Available in
non-breakaway and breakaway versions
with an array of terminal options to meet
application needs. Breakaway versions come
with insulating boots to provide submersibility
per UL IP67.
Non-breakaway versions require ordering
optional insulating boots for submersibility.
Recommended fuses:
BAF, FNM, FNQ, KLM and KTK
Ratings:
Volts:
600V
Amps:
up to 30A limited by conductor size
Withstand: 200kA RMS Sym.
Description
Single conductor
Dual conductor
Part number
2A0660
2A0661
Boot reference:
0.8
(ø20)
4.1
(104)
1.3
(ø33)
4.7
(119)
Installation instructions:
Strip wire insulation equal to the depth of
the crimp or screw terminal. Torque screw
terminal to 35 Lb-In (3.9 N•m) or crimp terminal
twice, spacing crimps a distance of one-third
from each end (as shown below) using an
appropriate crimp tool and die. See page 6 for
recommended crimping tools.
Crimp terminal twice
at locations 1/3 distance
from each end
Agency information:
UL® Recognized, Guide IZLT2, File E14853
CSA® Certified, Class 622501, File 47235
CE, RoHS compliant†
Coupling nut torque:
Strip wire insulation
to depth of terminal
10-20 Lb-In (1.1-2.2 N•m)
Operating and storage temperature:
-40°F (-40°C) to 221°F (105°C)
Insulating boots:
Two insulating boots come standard with the
breakaway holder configurations. Insulating
boots are not included as standard with nonbreakaway holders. Two insulating boots must
be ordered separately, if required, for each nonbreakaway holder ordered. When insulating
boots are utilized, extra heat retention requires
Related products:
Catalog
number Description
Two-pole supplemental
HEX
in-line fuse holder
One-pole
Class CC in-line
HEZ
fuse holder
Two-pole Class CC in-line
HEY
fuse holder
One-pole in-line,
HET
permanently installed
neutral
13/32”
x 1-1/2” neutral
NNB
dummy link (not a fuse)
Data
sheet No.
2126
2130
2126
2125
—
* The Bussmann series HEB in-line fuse holders are the legacy
Bussmann TRON™ HEB in-line fuse holders.
† See terminal data tables for exceptions.
Technical Data 2127
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Effective December 2015
Non-breakaway catalog number system
Lineside
terminal
Loadside
terminal
Catalog
symbol
HEB - A A
To order:
Specify catalog symbol HEB and the loadside terminal code. Then select a lineside
terminal code that is available with the loadside terminal. Example: HEB-BB defines
a non-breakaway holder with a loadside copper crimp terminal for a single #6 or two
#10 wires with a lineside copper crimp terminal for a single #6 or two #10 wires.
Agency
Information
Loadside terminal
Terminal type
Lineside terminal
Wire
range*
Breakaway
equivalent
CSA
A
X
X
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#8-16;
(2) #12-16
4.4 (112)
HEB-AW-RLC-A
B
X
X
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#6;
(2) #10
4.4 (112)
HEB-AW-RLC-B
C
X
X
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#4 str;
(2) #8
4.7 (119)
HEB-AW-RLC-C
D
X
X
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#2 str;
(2) #6
4.7 (119)
—
J
X
—
Cu crimp
#8-16;
(2) #12-16
Cu setscrew
#3-12
4.7 (119)
HEB-AW-RLC-J
K
X
—
Cu crimp
#8-16;
(2) #12-16
Cu dual
setscrew
#2-12†
4.8 (122)
HEB-AW-RYC
R
—
—
Cu crimp
#8-16;
(2) #12-16
Al crimp
#1-2
4.9 (124)
­—
L
—
—
Cu crimp
#8-16;
(2) #12-16
Al setscrew
#2-12
4.7 (119)
HEB-AW-RLA
W
—
—
Cu crimp
#8-16;
(2) #12-16
Cu solid
—
4.4 (112)
—
Y
—
—
Cu crimp
#8-16;
(2) #12-16
Al dual
setscrew
#2-12†
4.8 (122)
HEB-AW-RYA
A
X
X
Cu crimp
#6;
(2) #10
Cu crimp
#8-16;
(2) #12-16
4.4 (112)
HEB-BW-RLC-A
B
X
X
Cu crimp
#6;
(2) #10
Cu crimp
#6;
(2) #10
4.4 (112)
HEB-BW-RLC-B
C
X
X
Cu crimp
#6;
(2) #10
Cu crimp
#4 str;
(2) #8
4.7 (119)
—
D
X
X
Cu crimp
#6;
(2) #10
Cu crimp
#2 str;
(2) #6
4.7 (119)
—
W
—
—
Cu crimp
#6;
(2) #10
Cu solid
—
4.4 (112)
—
C
C
X
X
Cu crimp
#4 str;
(2) #8
Cu crimp
#4 str;
(2) #8
5 (127)
—
D
D
X
X
Cu crimp
#2 str;
(2) #6
Cu crimp
#2 str;
(2) #6
5 (127)
—
Z
A
—
—
Cu crimp
#18-20
Cu crimp
#8-16;
(2) #12-16
4.4 (112)
—
J
X
—
Cu
setscrew
#3-12
Cu setscrew
#3-12
5 (127)
HEB-JW-RLC-J
K
X
—
Cu
setscrew
#3-12
Cu dual
setscrew
#2-12†
5.1 (129)
HEB-JW-RYC
L
—
—
Cu
setscrew
#3-12
Al setscrew
#2-12
5 (127)
—
W
—
—
Cu
setscrew
#3-12
Cu solid
—
4.8 (122)
—
Y
—
—
Cu
setscrew
#3-12
Al dual
setscrew
#2-12†
5.1 (129)
—
HEB
B
J
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Non-breakaway dimensions - in (mm):
A
9.125 (232)
Assembled length
2
Reference
length
A
UL
A
Terminal type
Wire
range*
Eaton.com/bussmannseries
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective December 2015
Non-breakaway catalog number system
Lineside
terminal
Agency
Information
Loadside
terminal
Catalog
symbol
HEB - A A
L
L
—
—
Al
setscrew
#2-12
Al
setscrew
#2-12
5 (127)
HEB-LW-RLA
N
N
—
—
Al crimp
6 sol;
8 str
Al crimp
#6 sol;
#8 str
5.4 (137)
—
P
P
—
X
Al crimp
4 sol;
6 str
Al crimp
#4 sol;
#6 str
5.4 (137)
—
Q
Q
—
X
Al crimp
#2 sol;
#3-4 str
Al crimp
#2 sol;
#3-4 str
5.4 (137)
—
R
R
—
X
Al crimp
#1-2 str
Al crimp
#1-2 str
5.4 (137)
—
T
T
—
X
Al crimp
1/0 str
Al crimp
1/0 str
5.4 (137)
—
W
W
—
—
Cu solid
—
Cu solid
—
4.4 (112)
—
HEB
UL
CSA
Loadside terminal
Lineside terminal
Wire
range*
Terminal type
Terminal type
Wire
range*
Reference
length
A
Breakaway
equivalent
* Solid/stranded conductors unless otherwise noted.
•
#6
1
•
•
#10
2
•
•
#4
1
—
•
#8
2
•
•
A
B
C††
#2
1
—
•
#6
2
•
•
#18-20
1
•
•
Z
#3-12
1
•
•
J
#8
1
—
•
#6
1
•
—
#6
1
—
•
#4
1
•
—
#3-4
1
—
•
#2
1
•
—
#1-2
1
—
•
R
#1/0
1
—
•
T
#2-12
1
•
•
L
#2-12
2†
•
•
Y
N
P
Q
D††
Al setscrew
#2-12
2
†
•
•
K
Al dual
setscrew
Cu solid
Catalog symbol
[Load /Line]
•
•
Stranded
Stranded
•
2
Solid
Solid
1
Terminal type
Al crimp
No. per
terminal
Cu dual
setscrew
#8-16
#10-16
Conductor data
Size
Cu setscrew
No. per
terminal
Terminal type
Cu crimp
Size
Conductor data
Catalog symbol
[Load /Line]
Non-Breakaway terminal data
—
—
—
—
W
† Not dual wire rated. One wire per opening.
†† Fuse holder assemblies using this terminal are not RoHS compliant.
Eaton.com/bussmannseries
3
Technical Data 2127
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Effective December 2015
To order:
Breakaway catalog number system
A
HEB
B
Lineside
terminal
Loadside
terminal
Catalog
symbol
HEB - A W - RYC
Agency
Information
UL
Loadside terminal
CSA
Terminal type
Lineside terminal
Wire
range*
Length
NonA
breakaway
(reference) equivalent
Cu crimp
#8-16;
5.8 (147)
(2) #12-16
HEB-AA
RLC-A
X
X
Cu crimp
RLC-B
X
—
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#6;
(2) #10
5.9 (150)
HEB-AB
RLC-C
X
—
Cu crimp
#8-16;
(2) #12-16
Cu crimp
#4 str;
(2) #8
6.2 (158)
HEB-AC
RLC-J
X
—
Cu crimp
#8-16;
(2) #12-16
Cu
setscrew
#3-12
6.2 (158)
HEB-AJ
RYC
X
—
Cu crimp
#8-16;
(2) #12-16
Cu dual
setscrew
#2-12†
6.3 (159)
HEB-AK
RLA
—
—
Cu crimp
#8-16;
(2) #12-16
Al
setscrew
#2-12
6.2 (158)
HEB-AL
RYA
—
—
Cu crimp
#8-16;
(2) #12-16
Al dual
setscrew
#2-12†
6.3 (159)
HEB-AY
RLC-A
X
—
Cu crimp
#6;
(2) #10
Cu crimp
#8-16;
5.8 (147)
(2) #12-16
HEB-BA
RLC-B
X
—
Cu crimp
#6;
(2) #10
Cu crimp
6#;
(2) #10
5.9 (150)
HEB-BB
RYC
X
—
Cu crimp
#6;
(2) #10
Cu dual
setscrew
#2-12†
6.3 (159)
—
RLC-J
X
—
Cu
setscrew
#3-12
Cu
setscrew
#3-12
6.2 (158)
HEB-JJ
RYC
X
—
Cu
setscrew
#3-12
Cu dual
setscrew
#2-12†
6.3 (159)
HEB-JK
RLC-J
X
—
Cu dual
setscrew
#2-12†
Cu
setscrew
#3-12
6.2 (158)
—
RYC
X
—
Cu dual
setscrew
#2-12†
Cu dual
setscrew
#2-12†
6.3 (159)
—
RLA
—
—
Al
setscrew
#2-12
Al
setscrew
#2-12
6.2 (158)
HEB-LL
RLC-J
—
—
Al
setscrew
#2-12
Cu
setscrew
#3-12
6.2 (158)
—
RYA
—
—
Al
setscrew
#2-12
Al dual
setscrew
#2-12†
6.3 (159)
—
K
* Solid/stranded conductors unless otherwise noted.
† Not dual wire rated. One wire per opening.
Dimensions - in (mm):
Breakaway
A
10.375 (263)
Assembled length
4
Terminal type
Wire
range*
#8-16;
(2) #12-16
J
L
Specify catalog symbol HEB and the loadside terminal code plus the letter “W.”
Then select a lineside terminal code that is available with the loadside terminal.
Example: HEB-BW-RCL-B defines a breakaway holder with a loadside copper
crimp terminal for a single #6 or two #10 wires with a lineside copper crimp
terminal for a single #6 or two #10 wires.
Eaton.com/bussmannseries
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Effective December 2015
Breakaway lineside terminal data
#10-16
2
•
•
#6
1
•
•
#10
2
•
•
#3-12
1
•
•
A
B
Cu setscrew
Catalog
symbol
•
Stranded
Stranded
•
Solid
Solid
1
Terminal type
Cu crimp
No. per
terminal
No. per
terminal
#8-16
Conductor data
Size
Size
Conductor data
Catalog symbol
[Load /Line
(2) & (3)]
Breakaway loadside terminal data
Terminal type
Cu crimp
Technical Data 2127
#8-16
#12-16
1
2
•
•
•
•
-RLC-A
#6
#10
1
2
•
•
•
•
-RLC-B
#4
#8
1
2
—
•
•
•
-RLCC††
#3-12
1
•
•
-RLC-J
#2-12
2†
•
•
-RYC
#2-12
1
•
•
-RLA
#2-12
2†
•
•
-RYA
Cu setscrew
J
Cu dual setscrew
Cu dual setscrew
#2-12
2†
•
•
K
Al setscrew
Al setscrew
#2-12
1
•
•
L
Al dual setscrew
† Not dual wire rated. One wire per opening.
†† Fuse holder assemblies using this terminal are not RoHS compliant.
Eaton.com/bussmannseries
5
Bussmann series HEB breakaway and non-breakaway
in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses
Technical Data 2127
Effective October 2015
Recommended crimping tools:
A wide variety of crimping tools can be used with the HEB fuse
holders. Some of the commercially available tools are listed in
the table below. This list is not intended to exclude the use of
other crimping tools that can provide similar crimps or indents.
HEB terminal
A
B
C
D
Z
N, P, Q, R, T
T & B P/N (Die)
WT-111M (Die C)
Sta-Kon® ERG4002 (Die C)
WT-115A (Die D)
TBM5 (Grey Die)
WT-115A (Die E)
TBM5 (Brown Die)
TBM8 (Brown Die)
WT-115A (Die F)
WT-111M (Die A)
Sta-Kon ERG4002 (Die A)
TBM8 (Orange Die)
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this
document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of
any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any
technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. 2127 - BU-SB15154
December 2015
Eaton, Bussmann and Tron are valuable
trademarks of Eaton in the US and other
countries. You are not permitted to use the
Eaton trademarks without prior written
consent of Eaton.
CSA is a registered trademark of the
Canadian Standards Group.
Sta-Kon is a registered trademark of
Thomas & Betts.
UL is a registered trademark of the
Underwriters Laboratories, Inc.
Similar pages