Rohm EDZFH18B Zener diode Datasheet

Data Sheet
AEC-Q101 Qualified
Zener Diode
EDZ)+3.9B
Applications
Constant voltage control
Land size figure (Unit : mm)
Dimensions (Unit : mm)
0.8±0.05
0.12±0.05
0.6
0.8
Construction
Silicon epitaxial planer
1.6±0.1
1.2±0.05
1.7
Features
1)2-pin ultra mini-mold type for high-density
mounting (EMD2)
2) High reliability
3)Can be mounted automatically,using chip
mounter.
ＥMD2
0.3±0.05
Structure
0.6±0.1
ROHM : EMD2
JEDEC :SOD-523
JEITA : SC-79
EX. EDZ)+3.6B
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
0.06
1.25
+
−0
3.5±0.05
0.6
φ0.5
0.90±0.05
Absolute maximum ratings (Ta=25C)
Parameter
Symbol
Power dissipation
P
Junction temperature
Tj
Storage temperature
Tstg
Operating temperature
Topr
0.2±0.05
8.0±0.15
φ1.55±0.05
2.0±0.05
1.25 + 0.06
−0
2.40±0.05
4.0±0.1
1.75±0.1
Taping dimensions (Unit : mm)
Empty pocket
Limits
150
150
-55 to +150
-55 to +150
1/4
4.0±0.1
2.0±0.05
0.2
0.75±0.05
Unit
mW
C
C
C
2011.05 - Rev.F
EDZ)+3.9B
Data Sheet
Electical voltage (Ta=25C)
Symbol
Zener voltage：Vz(V)
TYP.
Operating
Rising operating
resistance : Zz() resistance : Zz()
Reverse current :
IR(uA)
VR(V)
Iz(mA)
MAX. Iz(mA) MAX. Iz(mA)
MAX.
5.0
100
5.0
1000
10.0
1.0
1.0
EDZFH3.9B
EDZ 3.9B
5.0
100
5.0
1000
5.0
1.0
1.0
EDZFH4.3B
EDZ 4.3B 4.170
5.0
5.0
5.0
4.430
100
1000
1.0
1.0
EDZFH4.7B
EDZ 4.7B 4.550
5.0
5.0
2.0
4.750
100
800
0.5
1.0
EDZFH5.1B
EDZ 5.1B 4.980
5.0
5.0
2.0
5.200
80
500
0.5
1.5
EDZFH5.6B
EDZ 5.6B 5.490
5.0
5.0
1.0
5.730
60
200
0.5
2.5
EDZFH6.2B
EDZ 6.2B 6.060
5.0
5.0
1.0
6.330
60
100
0.5
3.0
EDZFH6.8B
EDZ 6.8B 6.650
5.0
5.0
0.5
6.930
40
60
0.5
3.5
EDZFH7.5B
EDZ 7.5B 7.280
5.0
5.0
0.5
7.600
30
60
0.5
4.0
EDZFH8.2B
EDZ 8.2B 8.020
5.0
5.0
0.5
8.360
30
60
0.5
5.0
EDZFH9.1B
EDZ 9.1B 8.850
5.0
5.0
0.5
9.230
30
60
0.5
6.0
EDZFH10B
EDZ 10B
5.0
5.0
0.1
9.770
10.210
30
60
0.5
7.0
EDZFH11B
EDZ 11B 10.760
5.0
5.0
0.1
11.220
30
60
0.5
8.0
EDZFH12B
0.1
EDZ 12B 11.740
5.0
5.0
0.5
9.0
12.240
30
80
EDZFH13B
EDZ 13B 12.910
5.0
5.0
0.1
13.490
37
80
0.5
10.0
EDZFH15B
EDZ 15B 14.340
5.0
5.0
0.1
14.980
42
80
0.5
11.0
EDZFH16B
EDZ 16B 15.850
5.0
5.0
0.1
16.510
50
80
0.5
12.0
EDZFH18B
EDZ 18B 17.560
5.0
5.0
0.1
18.350
65
80
0.5
13.0
EDZFH20B
EDZ 20B 19.520
5.0
85
5.0
0.1
20.390
100
0.5
15.0
EDZFH22B
EDZ 22B 21.540
5.0
5.0
0.1
100
22.470
100
0.5
17.0
EDZFH24B
EDZ 24B 23.720
5.0
5.0
0.1
120
24.780
120
0.5
19.0
EDZFH27B
EDZ 27B 26.190
2.0
2.0
0.1
150
27.530
150
0.5
21.0
EDZFH30B
EDZ 30B 29.190
2.0
2.0
0.1
200
30.690
200
0.5
23.0
EDZFH33B
EDZ 33B 32.150
2.0
2.0
0.1
250
33.790
250
0.5
25.0
EDZFH36B
EDZ 36B 35.070
36.870
2.0
2.0
300
0.5
0.1
27.0
300
(１)The zener voltage(Vz) is measured 40ms after power is supplied.
(２)The operating resistances(Zz,Zzk) are measured by superimposing a minute alternating curren
on the regulated current(Iz)
EDZFH3.6B
EDZ 3.6B
MIN.
3.600
3.890
MAX.
3.845
4.160
MARKING (Type No.)
TYPE
EDZ
3.6B
EDZFH3.6B
EDZ
3.9B
EDZFH3.9B
EDZ
4.3B
EDZFH4.3B
EDZ
4.7B
EDZFH4.7B
EDZ
5.1B
EDZFH5.1B
EDZ
5.6B
EDZFH5.6B
EDZ
6.2B
EDZFH6.2B
EDZ
6.8B
EDZFH6.8B
EDZ
7.5B
EDZFH7.5B
EDZFH8.2B
EDZ
8.2B
EDZFH9.1B
EDZ
9.1B
EDZFH10B
EDZ
10B
EDZFH11B
EDZ
11B
TYPE NO.
62
72
82
92
A2
C2
E2
F2
H2
J2
L2
05
15
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
TYPE
EDZ
12B
EDZFH12B
EDZ
13B
EDZFH13B
EDZ
15B
EDZFH15B
EDZ
16B
EDZFH16B
EDZ
18B
EDZFH18B
EDZ
20B
EDZFH20B
EDZ
22B
EDZFH22B
EDZ
24B
EDZFH24B
EDZ
27B
EDZFH27B
EDZFH30B
EDZ
30B
EDZFH33B
EDZ
33B
EDZFH36B
EDZ
36B
TYPE NO.
25
35
45
55
65
75
85
95
A5
C5
E5
F5
2/4
2011.05 - Rev.F
Data Sheet
EDZFH3.9B
10
ZENER CURRENT:Iz(mA)
1
0.1
7.5
4.7
5.1 5.6
4.3
8.2
0.01
6.8
9.1
10
3.9
6.2
11
12
3.6
13
15
16
18
20
24
22
33
30
27
36
0.001
0
5
10
15
20
25
30
35
40
ZENER VOLTAGE:Vz(V)
Vz-Iz CHARACTERISTICS
10000
140
REVERSE SURGE MAXIMUM
POWER:PRSM(W)
POWER DISSIPATION:Pd(W)
160
120
100
80
60
40
20
0
25
50
75
100
125
150
10
1
35
0.08
30
0.06
25
0.04
20
0.02
15
0
10
-0.02
-0.04
5
-0.06
0
-0.08
30
10
100
100
Rth(j-c)
10
Mounted on epoxy board
IM=10mA
1
1ms
IF=100mA
time
300us
0.1
0.001
40
0.01
0.1
1
10
100
1000
TIME : t(s)
Rth-t CHARACTERISTICS
ZENER VOLTAGE : Vz(V)
γz-Vz CHARACTERISTICS
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
1
Rth(j-a)
-5
20
0.1
1000
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
40
0.1
TEMP.COEFFICIENCE:γz(mV/℃)
TEMP.COEFFICIENCE:γz(％/℃)
0.12
10
0.01
TIME : t(ms)
PRSM-TIME CHARACTERISTICS
AMBIENT TEMPERATURE : Ta(℃)
Pd-Ta CHARACTERISTICS
0
t
100
0.1
0.001
0
PRSM
1000
3/4
2011.05 - Rev.F
Data Sheet
EDZFH3.9B
10
100
Ta=25℃
Ta=125℃
Ta=-25℃
0.01
Ta=75℃
1
0.1
Ta=25℃
0.01
Ta=-25℃
0.001
1
2
3
4
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
REVERSE VOLTAGE : V R(V)
VR-Ct CHARACTERISTICS
REVERSE VOLTAGE : V R(V)
VR-IR CHARACTERISTICS
ZENER VOLTAGE : Vz(V)
Vz-Iz CHARACTERISTICS
4.2
1
Ta=25℃
IZ=5mA
n=30pcs
200
Ta=25℃
VR=1.0V
n=30pcs
0.9
REVERSE CURRENT:IR(nA)
4.1
10
1
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
5
4
3.9
AVE:3.952V
3.8
3.7
Vz DISPERSION MAP
0.8
0.7
0.6
0.5
0.4
0.3
AVE:0.100nA
0.2
180
170
160
150
AVE:165.1pF
140
130
120
0.1
110
0
100
IR DISPERSION MAP
Ta=25℃
f=1MHz
VR=0V
n=10pcs
190
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
0
100
0.0001
0.00001
0.001
ZENER VOLTAGE:Vz(V)
f=1MHｚ
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
1
0.1
1000
Ta=125℃
10
REVERSE CURRENT:IR(nA)
ZENER CURRENT:Iz(mA)
Ta=75℃
Ct DISPERSION MAP
DYNAMIC IMPEDANCE:Zz()
10000
1000
100
10
1
0.1
1
10
ZENER CURRENT:Iz(mA)
Zz-Iz CHARACTERISTICS
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
4/4
2011.05 - Rev.F
Datasheet
Notice
Precaution on using ROHM Products
1.
If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),
aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,
bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales
representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any
ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅡb
CLASSⅢ
CLASSⅢ
CLASSⅣ
CLASSⅢ
2.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3.
Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.
Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the
use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our
Products under any special or extraordinary environments or conditions (as exemplified below), your independent
verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4.
The Products are not subject to radiation-proof design.
5.
Please verify and confirm characteristics of the final or mounted products in using the Products.
6.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7.
De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8.
Confirm that operation temperature is within the specified range described in the product specification.
9.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1.
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2.
In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001
Datasheet
Precautions Regarding Application Examples and External Circuits
1.
If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2.
You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1.
Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2.
Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3.
Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4.
Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1.
All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data.
2.
ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3.
No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1.
This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2.
The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3.
In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4.
The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice-PAA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001
Datasheet
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s
representative.
3.
The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or
liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or
concerning such information.
Notice – WE
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001