Lumileds DS105 High power color leds in a micro footprint package for ultimate design flexibility Datasheet

Illumination
LUXEON Z
Color Line
High power color LEDs in a micro footprint
package for ultimate design flexibility
The LUXEON Z Color Line comprises a broad portfolio of LEDs that
enable never before seen lumen density, flexibility and freedom of design.
Available in the full spectrum of colors from 440nm to 670nm, including
Lime, enabling highly efficient color mixing with a convenient aboveblackbody color point. The LUXEON Z Color Line is ideal for entertainment
and stage lighting, indoor and outdoor architectural lighting, emergency
vehicle lighting, remote phosphor applications and a wide spectrum of
specialty lighting applications.
Features and Benefits
Primary Applications
Broad selection spanning 440–670nm, including a unique Lime color
Architectural
2.2mm² footprint enables unique arrangements in space constrained
applications
4-up RGBW pixel in 9.5mm² — four colors in less area than one regular
high power color emitter
Undomed design allows better optical management
Lamps
–– Remote Phosphor
Specialty Lighting
Enables customizable light sources: linear, rectangular, circular
DS105 LUXEON Z Color Line Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristics Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Dominant and Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON Z Color Line LEDs are tested and binned with a DC drive current of 500mA at a junction temperature, Tj, of 25°C or 85°C,
depending on the product.
Part Number Nomenclature
Part numbers for LUXEON Z Color Line follow the convention below:
L X Z 1 – P A 0 B
Where:
A
–
designates color (A=Deep Red, D=Red, H=Red-Orange, L=Amber and PC Amber, X=Lime, M=Green,
E=Cyan, B=Blue and R=Royal Blue)
B
designates color version (example: 1, 2, 3)
–
Therefore, the following part number is used for a LUXEON Z version 2 Red:
L X Z 1 – P D 0 2
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z Color Line
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1a. Product performance of LUXEON Z Color Line at 500mA, Tj=25°C.
Color
Deep Red
DOMINANT [1] or
PEAK WAVELENGTH [2] (nm)
LUMINOUS FLUX [1] (lm) or
RADIOMETRIC POWER [3] (mW)
Minimum
Maximum
Minimum
Typical
650
670
250
350
Part
Number
LXZ1-PA01
Red
620
645
40
52
LXZ1-PD01
Red-Orange
610
620
56
65
LXZ1-PH01
Amber
585
590
48
56
LXZ1-PL01
Green
520
540
80
118
LXZ1-PM01
Cyan
490
510
48
82
LXZ1-PE01
Blue
460
480
24
38
LXZ1-PB01
Royal Blue
440
460
500
575
LXZ1-PR01
Table 1b. Product performance of LUXEON Z Color Line at 500mA, Tj=85°C.
Color
DOMINANT WAVELENGTH [1] (nm)
LUMINOUS FLUX [1] (lm)
Part
Number
MINIMUM
MaxIMUM
MINIMUM
Typical
Red
624
634
24
43
LXZ1-PD02
Red-Orange
614
624
40
47
LXZ1-PH02
Amber
594
604
16
24
LXZ1-PL03
PC Amber
588
592
72
107
LXZ1-PL02
Lime
566
569
144
175
LXZ1-PX01
Notes for Tables 1a and 1b:
1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength and ±6.5% on luminous flux measurements.
2. Deep Red and Royal Blue are binned by peak wavelength. All other colors are binned by dominant wavelength.
3. Deep Red and Royal Blue are binned by radiometric power. All other colors are binned by luminous flux.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2. Optical characteristics for LUXEON Z Color Line at 500mA and specified junction temperature.
Color
Part
Number
Typical
Spectral
Half-width [1]
(nm)
Typical Temperature
Coefficient of Dominant
or Peak Wavelength
(nm/°C)
Typical Total
Included
Angle [2]
Typical
Viewing
Angle [3]
Deep Red
LXZ1-PA01 [4]
20
0.06
150°
145°
LXZ1-PD01
Red
Red-Orange
Amber
PC Amber
Lime
20
0.06
150°
145°
LXZ1-PD02 [4, 6]
20
0.06
150°
145°
LXZ1-PH01
20
0.06
150°
145°
20
0.06
150°
145°
[4]
20
0.10
150°
145°
[4, 6]
[4]
[4]
LXZ1-PH02 [4, 6]
LXZ1-PL01
LXZ1-PL03
20
0.10
150°
145°
LXZ1-PL02 [5]
80
0.01
140°
125°
LXZ1-PX01
100
0.01
140°
125°
LXZ1-PM01 [5]
30
0.04
140°
125°
Cyan
LXZ1-PE01
[5]
30
0.03
140°
125°
Blue
LXZ1-PB01
[5]
20
0.03
140°
125°
LXZ1-PR01 [5]
20
0.03
140°
125°
Green
Royal Blue
[5]
Notes for Table 2:
1. Spectral width at ½ of the peak intensity.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
4. All Deep Red, Red, Red-orange and Amber products are built with Aluminum Indium Gallium Phosphide (AlInGaP).
5. All PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN).
6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been defined to align with typical changes in spectral output at increased temperature, which are inherent
to AlInGaP LEDs. At Tj=25°C these hot-tested parts will have the same typical spectral outputs as their cold-tested counterparts.
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON Z Color Line at 500mA and specified junction temperature.
Color
Deep Red
Red
Red-Orange
Amber
Forward Voltage [1] (Vf)
Typical Thermal
Resistance—Junction
to Solder Pad (°C/W)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
LXZ1-PA01
1.75
2.20
2.75
-2 to -4
8
LXZ1-PD01
1.75
2.20
2.75
-2 to -4
8
Part Number
LXZ1-PD02
1.75
2.20
2.75
-2 to -4
8
LXZ1-PH01
1.75
2.20
2.75
-2 to -4
8
LXZ1-PH02
1.75
2.20
2.75
-2 to -4
8
LXZ1-PL01
1.75
2.15
2.75
-2 to -4
8
LXZ1-PL03
1.75
2.25
2.75
-2 to -4
8
PC Amber
LXZ1-PL02
2.50
2.85
3.50
-2 to -4
5
Lime
LXZ1-PX01
2.50
2.85
3.50
-2 to -4
5
Green
LXZ1-PM01
2.50
3.27
3.50
-2 to -4
5
Cyan
LXZ1-PE01
2.50
3.27
3.50
-2 to -4
5
Blue
LXZ1-PB01
2.50
2.85
3.50
-2 to -4
5
Royal Blue
LXZ1-PR01
2.50
2.85
3.50
-2 to -4
5
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
4
Absolute Maximum Ratings
Table 4a. Absolute maximum ratings for LUXEON Z Color Line tested at Tj=25°C.
Parameter
DC Forward Current [1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature [1] (DC & Pulse)
Green/Cyan/
Blue/Royal Blue
Cold-Tested
Red/Deep-Red/
Red-Orange/Amber
1000mA
700mA
1000mA
700mA
150°C
135°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B
Class 3B
Operating Case Temperature [1]
-40°C to 135°C
-40°C to 120°C
LED Storage Temperature
-40°C to 135°C
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
Autoclave Conditions
-121°C at 2 ATM
100% Relative Humidity for 96 hours Maximum
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4a:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
Table 4b. Absolute maximum ratings for LUXEON Z Color Line tested at Tj=85°C.
Parameter
DC Forward Current [1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature [1] (DC & Pulse)
Hot-Tested Red/
Red-Orange/Amber [4]
PC Amber/Lime
1000/700mA
700mA
1000/700mA
700mA
120°C/135°C
135°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B
Class 3B
Operating Case Temperature [1]
-40°C to 120°C
-40°C to 110°C
LED Storage Temperature
-40°C to 120°C
-40°C to 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
Autoclave Conditions
100% Relative Humidity for 96 hours Maximum
Reverse Voltage (Vreverse)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4b:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum
allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding
maximum junction temperature.
3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.
4. Hot Tested LUXEON Z Red (LXZ1-PD02), Red-Orange (LXZ1-PH02) and Amber (LXZ1-PL03) products have two boundary points for maximum conditions: If=1A and Tj=120°C or
If=700mA and Tj=135°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
5
Characteristics Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LUXEON Z Red, Red-Orange, Amber,
Green, Cyan, Blue and Royal Blue, at 500mA, Tj=25°C.
1
Relative Spectral Power
Distribution
0.8
PC Amber
0.6
Lime
0.4
0.2
0
350
400
450
500
550
600
650
700
750
800
Wavelength (nm)
Figure 1b. Typical normalized power vs. wavelength for LUXEON Z PC Amber and Lime at 500mA, Tj=85°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
6
Light Output Characteristics
Relative Luminous/Radiant Flux
1.1
1
0.9
Royal Blue (LXZ1-PR01)
Radiometric
0.8
Blue (LXZ1-PB01) Photometric
0.7
Cyan (LXZ1-PE01) Photometric
Green (LXZ1-PM01)
Photometric
0.6
0.5
0
20
40
60
80
100
120
140
Thermal Pad Temperature (°C)
Figure 2a. Typical normalized light output vs. junction temperature for
LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at 500mA.
Relative Luminous/Radiant Flux
1.1
1
0.9
0.8
0.7
0.6
0.5
Amber (LXZ1-PL01)
Photometric
0.4
Deep Red (LXZ1-PA01)
Radiometric
0.3
0.2
Red (LXZ1-PD01)
Photometric
0.1
Red Orange (LXZ1-PH01)
Photometric
0
0
20
40
60
80
100
120
140
Thermal Pad Temperature (°C)
Figure 2b. Typical normalized light output vs. junction temperature for
LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at 500mA.
3
Red-Orange (LXZ1-PH02)
Relative Luminous Flux
2.5
Red (LXZ1-PD02)
Amber (LXZ1-PL03)
2
Lime (LXZ1-PX01)
PC Amber (LXZ1-PL02)
1.5
1
0.5
0
0
20
40
60
80
100
120
140
Junction Temperature (°C)
Figure 2c. Typical normalized light output vs. junction temperature for
LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02 and LXZ1-PL03 at 500mA.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
7
2.0
Relative Luminous/Radiant Flux
1.8
1.6
1.4
1.2
1.0
0.8
0.6
Royal Blue (LXZ1-PR01) Radiometric
Blue (LXZ1-PB01) Photometric
0.4
Cyan (LXZ1-PE01) Photometric
0.2
Green (LXZ1-MP01) Photometric
0.0
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 3a. Typical normalized light output vs. forward current for
LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at Tj=25°C.
1.4
Relative Luminous Flux
1.2
1.0
0.8
0.6
Amber (LXZ1-PL01)
0.4
Deep Red (LXZ1-PA01)
Red (LXZ1-PD01)
0.2
0.0
Red Orange (LXZ1-PH01)
0
100
200
300
400
500
600
700
800
Forward Current (mA)
Figure 3b. Typical normalized light output vs. forward current for
LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at Tj=25°C.
2
1.8
Relative Luminous Flux
1.6
1.4
1.2
1
0.8
Red (LXZ1-PD02), Red Orange (LXZ1-PH02) and Amber
(LXZ1-PL03)
0.6
Lime (LXZ1-PX01)
0.4
PC Amber (LXZ1-PL02)
0.2
0
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 3c. Typical normalized light output vs. forward current for
LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02, and LXZ1-PL03 at Tj=85°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
8
Forward Current Characteristics
1200
Blue (LXZ1-PB01)
1000
Green (LXZ1-PM01)
Forw
ward Currrent (mA
A)
Cyan (LXZ1-PE01)
Royal-Blue
y
((LXZ1-PR01))
800
600
400
200
0
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
Forward Voltage (V)
Figure 4a. Typical forward current vs. forward voltage for
LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01 at Tj=25°C.
800
700
Amber (LXZ1-PL01)
Fo
orward Current (m
mA)
600
Deep Red (LXZ1-PA01)
R d (LXZ1
Red
(LXZ1-PD01)
PD01)
500
Red Orange (LXZ1-PH01)
400
300
200
100
0
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
Forward Voltage (V)
Figure 4b. Typical forward current vs. forward voltage for
LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01 at Tj=25°C.
1200
Red-Orange (LXZ1-PH02)
Red (LXZ1-PD02)
Forward Current (mA)
1000
Amber (LXZ1-PL03)
Lime (LXZ1-PX01)
800
PC Amber (LXZ1-PL02)
600
400
200
0
1.8
2
2.2
2.4
2.6
2.8
3
3.2
Forward Voltage (V)
Figure 4c. Typical forward current vs. forward voltage for
LXZ1-PX01, LXZ1-PL02, LXZ1-PD02, LXZ1-PH02, and LXZ1-PL03 at Tj=85°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
9
Radiation Pattern Characteristics
120%
100%
Relative
e Intensity
y (%)
80%
60%
40%
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
Green (LXZ1-PM01)
20%
0%
Royal Blue (LXZ1-PR01)
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 5a. Typical radiation pattern for LUXEON Z LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01
at 500mA, Tj=25°C.
120%
Relative Intensity (%)
100%
80%
60%
40%
Red
Red Orange
Deep Red
20%
0%
Amber
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 5b. Typical radiation pattern for LUXEON Z LXZ1-PL01, LXZ1-PA01, LXZ1-PD01, LXZ1-PH01, LXZ1-PL03,
LXZ1-PH02 and LXZ1-PD02 at 500mA, Tj=25°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
10
120%
Relative Intensity (%)
100%
80%
60%
40%
Lime (LXZ1-PX01) and PC Amber
(LXZ1-PL02)
20%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Anglular Displacement (deg)
Figure 5c. Typical radiation pattern for LUXEON Z LXZ1-PX01 and LXZ1-PL02 at 500mA, Tj=85°C.
1
0°
-30°
30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
Blue (LXZ1-PB01)
Cyan (LXZ1-PE01)
Green (LXZ1-PM01)
Royal Blue (LXZ1-PR01)
-120°
120°
-150°
150°
180°
180
Figure 6a. Typical polar radiation pattern for LUXEON Z LXZ1-PR01, LXZ1-PB01, LXZ1-PE01 and LXZ1-PM01
at 500mA, Tj=25°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
11
0°
1
-30°
30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
Deep Red
Red Orange
Red
-120°
120°
Amber
-150°
150°
180°
Figure 6b. Typical polar radiation pattern for LUXEON Z LXZ1-PL01, LXZ1-PA01, LXZ1-PD01 and LXZ1-PH01,
LXZ1-PL03, LXZ1-PH02 and LXZ1-PD02 at 500mA, Tj=25°C.
1
0°
30°
-30°
0.8
0.6
-60°
60°
0.4
0.2
-90°
90°
0
-120°
Lime (LXZ1-PX01) and PC Amber (LXZ1-PL02)
-150°
120°
150°
180°
Figure 6c. Typical polar radiation pattern for LUXEON Z LLXZ1-PX01 and LXZ1-PL02 at 500mA, Tj=85°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
12
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
Reels of LUXEON Z Deep Red, Red, Red-Orange, Amber, Lime, Green, Cyan, Blue and Royal Blue are labeled using a 3-digit
alphanumeric CAT code following the format below.
A B C
A
–
designates luminous flux or radiometric power bins (example: K=96 to 104 lumens, V=194 to 204 lumens)
B
–
designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 7=495 to 500nm,
Blue 4=475 to 480nm )
C
designates forward voltage bin (example: 2=2.50 to 2.75V, 6=3.00 to 3.25V)
–
Therefore, a LUXEON Z Green LED with a lumen range of 96 to 104, a dominant wavelength of 525 to 530nm and a forward
voltage range of 2.50 to 2.75V has the following CAT code:
K 2 4
Reels of LUXEON Z PC Amber are labeled using a 4-digit alphanumeric CAT code following the format below.
A B C D
A
–
designates luminous flux bin (example: K=96 to 104 lumens, L=104 to 114 lumens)
B C –
designates peak wavelength bin (example: A1)
D
designates forward voltage bin (example: 3=2.25 to 2.50V, 5=2.75 to 3.00V)
–
Therefore, a LUXEON Z PC Amber LED with a lumen range of 104 to 114, color bin of A1 and a forward voltage range of 2.75 to
3.00V has the following CAT code:
L A 1 5
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
13
Luminous Flux Bins
Table 5a and Table 5b list the standard luminous flux bins for LUXEON Z Color Line emitters. Although several bins are outlined,
product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5a. Luminous flux bin definitions for LUXEON Z Red (LXZ1-PD02), Red-Orange (LXZ1-PH02) and Amber (LXZ1-PL03).
BiN
Luminous Flux [1 ,2] (lm)
Minimum
Maximum
A
16
24
B
24
32
C
32
40
D
40
48
E
48
56
F
56
64
G
64
72
Notes for Table 5a:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Tested and binned at junction temperature of 85°C.
Table 5b. Luminous flux bin definitions for LUXEON Z Red (LXZ1-PD01), Red-Orange (LXZ1-PH01), Amber (LXZ1-PL01),
PC Amber (LXZ1-PL02), Lime (LXZ1-PX01), Green (LXZ1-PM01), Cyan (LXZ1-PE01), and Blue (LXZ1-PB01).
BiN
Luminous Flux [1 ,2] (lm)
Minimum
Maximum
A
24
32
B
32
40
C
40
48
D
48
56
E
56
64
F
64
72
G
72
80
H
80
88
J
88
96
K
96
104
L
104
114
M
114
124
N
124
134
P
134
144
Q
144
154
R
154
164
S
164
174
T
174
184
U
184
194
V
194
204
Notes for Table 5b:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Tested and binned at junction temperature of 25°C.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
14
Radiometric Power Bins
Table 6. Radiometric power bins for LUXEON Z Deep Red (LXZ1-PA01) and Royal Blue (LXZ1-PR01).
Bin
Radiometric Power [1] (mW)
Minimum
Maximum
A
250
300
B
300
350
C
350
400
D
400
450
E
450
500
F
500
550
G
550
600
H
600
650
J
650
700
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
15
Dominant and Peak Wavelength Bins
Table 7. Dominant wavelength bin definitions for LUXEON Z Color Line.
Color
Red
Red-Orange
Amber
PC Amber
Green
Cyan
Blue
Part Number
BIN
DOMINANT Wavelength [1] (nm)
Minimum
Maximum
LXZ1-PD02
4
624
634
LXZ1-PD01
4
620
630
LXZ1-PH02
2
614
624
LXZ1-PH01
2
610
620
2
594
599
4
599
604
1
585
587
2
587
590
4
590
592
6
592
595
1
520
525
2
525
530
3
530
535
4
535
540
1
490
498
2
498
508
6
490
495
7
495
500
8
500
505
9
505
510
1
460
465
2
465
470
3
470
475
4
475
480
5
480
485
LXZ1-PL03
LXZ1-PL01
LXZ1-PM01
LXZ1-PE01
LXZ1-PB01
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength measurements.
Table 8. Peak wavelenth bin defintions for LUXEON Z Deep Red and Royal Blue.
Color
Part Number
Deep Red
LXZ1-PA01
Royal Blue
LXZ1-PR01
BIN
PEAK Wavelength [1] (nm)
Minimum
Maximum
6
650
660
7
660
670
3
440
445
4
445
450
5
450
455
6
455
460
Notes for Table 8:
1. Lumileds maintains a tolerane of ±2nm for peak wavelength measurements
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
16
0.6
Lime
0.55
y
PC Amber
0.5
0.45
0.4
0.36
0.41
0.46
0.51
0.56
0.61
x
Figure 7. Color bin structure for LXZ1-PX01 and LXZ1-PL02 for Table 9.
Table 9. Color bin definitions for LUXEON Z PC Amber and Lime.
COLOR
PC Amber
Lime
Part Number
LXZ1-P7L02
LXZ1-PX01
Bin
A1
1
x
y
0.5622
0.4372
0.5576
0.4326
0.5775
0.4132
0.5843
0.4151
0.3819
0.5055
0.4191
0.5790
0.4327
0.5655
0.3972
0.4986
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
17
Forward Voltage Bins
Table 10. Forward voltage bin definitions for LUXEON Z Color Line.
Forward Voltage [1] (Vf)
Bin
Minimum
Maximum
1
1.75
2.00
2
2.00
2.25
3
2.25
2.50
4
2.50
2.75
5
2.75
3.00
6
3.00
3.25
7
3.25
3.50
Notes for Table 10:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
Mechanical Dimensions
Figure 8. Mechanical dimensions for LUXEON Z Green, Cyan, Blue and Royal Blue.
Notes for Figure 8:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
18
Figure 9. Mechanical dimensions for LUXEON Z PC Amber and Lime.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Figure 10. Mechanical dimensions for LUXEON Z Deep Red, Red, Red-Orange and Amber.
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
19
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 11.
Table 11. Reflow profile characteristics for LUXEON Z Color Line.
PROFILE FEATURE
Lead Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 180 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 12. Moisture sensitivity levels for LUXEON Z Color Line.
level
1
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
Unlimited
≤30°C / 85% RH
168 Hours +5 / -0
85°C / 85% RH
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
20
Solder Pad Design
Figure 12. Recommended PCB solder pad layout for LUXEON Z Color Line.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging Information
Pocket Tape Dimensions
Figure 13. Pocket tape dimensions for LUXEON Z Blue, Green, Royal Blue, Cyan, Lime and PC Amber.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
21
Figure 14. Pocket tape dimensions for LUXEON Z Red, Red-Orange, Amber and Deep Red.
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
22
Reel Dimensions
Figure 15. Reel dimensions for LUXEON Z Color Line.
Notes for Figure 15:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS105 LUXEON Z Color Line Product Datasheet 20171107 ©2017 Lumileds Holding B.V. All rights reserved.
23
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2017 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS105 LUXEON Z Color Line
Product Datasheet 20171107
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
Similar pages