Kemet LDBCC2680GC5N0 Ldb series unencapsulated stacked chip, size 1206 â 1812, 16 and 50 vdc Datasheet

Surface Mount Metallized PPS Film Capacitor
LDB Series Unencapsulated Stacked Chip,
Size 1206 – 1812, 16 and 50 VDC
Overview
Applications
Polyphenylene sulphide (PPS) film capacitor for surface
mounting.
Typical applications include timing, filtering and use as a memory
capacitor. The LDB Series is designed for high stability, accuracy
and temperature.
Benefits
•
•
•
•
•
•
•
Rated voltage: 16 and 50 VDC
Capacitance range: 0.0033 – 0.1 µF
EIA size: 1206 – 1812
Capacitance tolerance: ±2%, ±5%
Climatic category: 55/125/56
RoHS Complaint and lead-free terminations
Operating temperature range of -55˚C to +125˚C
Part Number System
LDB
A
A
2120
G
C
5
N
0
Series
Rated Voltage
(VDC)
Size Code
Capacitance Code (pF)
Capacitance
Tolerance
Dielectric
Version
Packaging
Internal Use
See Dimension
Table
Digits 2-4 indicate the
first three digits of the
capacitance value.
First digit indicates the
number of zeros to be
added.
C = PPS
5 = Standard
See Ordering
Options Table
0 (Standard)
Metallized PPS A = 16
C = 50
G = ±2%
J = ±5%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
1
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Ordering Options Table
Packaging
Code
Packaging Type
Standard Packaging Options
Tape & Reel (Standard Reel)
N
Dimensions – Millimeters
H
W
Size Code
Chip Size
(EIA)
Nominal
Tolerance
A
B
C
1206
1210
1812
1.7
2.5
3.3
+/-0.2
+/-0.3
+/-0.3
See Part Number Table
L
Nominal
Tolerance
3.3
3.3
4.7
+0.3/-0.1
+0.3/-0.1
+0.3/-0.2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
2
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Performance Characteristics
Rated Voltage (VDC)
Capacitance Range (μF)
Chip Size (EIA)
E12 series
Capacitance Tolerance
±2%, ±5%
Rated Temperature
Voltage Derating
50
0.012 – 0.1
0.0033 – 0.1
1206 – 1812
Capacitance Values
Category Temperature Range
16
-55°C to +125°C
+105°C
The rated voltage is decreased with 1.25%/°C from +105°C to +125°C
Climatic Category
55/125/56
Capacitance Drift
Maximum 1% after a 2 year storage period at a temperature of +10°C to
+40°C and a relative humidity of 40% to 60%
Reliability
(Reference MIL-HDBK-217)
Failure rate ≤ 1 FIT, T = +40°C, V = 0.5 x VR
1 FIT = 10 -9 failures / (components * hours)
Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the
catalog limits, IR < 0.005 x initial limit
Measured at +25°C ±5°C
Minimum Value Between Terminals
Insulation Resistance
Dissipation Factor
Surge Voltage Test
3,000 MΩ
Charging time: 1 minute
Charging voltage:
10 VDC for VR = 16 VDC
50 VDC for VR = 50 VDC
Maximum Values at 25°C ±5°C
1 kHz
0.6%
1.75 x VR (5 seconds; T = 25 ± 5°C)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
3
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
PPS Dielectric Typical Temperature Graphs
PPS Dielectric Typical Frequency Graphs
Note: measurements performed at T = 25 ± 5ºC
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
4
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Environmental Test Data
Damp Heat, Steady State
Test Conditions
Temperature
Relative Humidity (RH)
Test Duration
Test Conditions
93% ±2%
56 days
See Solder Process
Performance
+40°C ±2°C
Performance
Capacitance Change |∆ C/C|
Reflow
Capacitance Change |∆ C/C|
DF Change (∆tgδ)
Insulation Resistance
≤ 3%
≤ 50 x 10 -4 at 1 kHz
≥ limit value
No Mechanical Damage
≤ 5%
DF Change (∆tgδ)
≤ 30 x 10 -4 at 1 kHz
Bending
Insulation Resistance
≥ 50% of limit value
Test Conditions
Deflection
Endurance
Test Conditions
Temperature
125°C ±2°C
Test Duration
2,000 hours
Voltage Applied
1.25 x VC
1 to 6 mm
Performance
Capacitance Change |∆ C/C|
≤ 1%
No visible damage on the terminations
(pealing) neither on the body (cracking)
Performance
Capacitance Change |∆ C/C|
≤ 3%
DF Change (∆tgδ)
≤ 30 x 10 -4 at 1 kHz
Insulation Resistance
≥ 50% of limit value
Rapid Change of Temperature
Test Conditions
Temperature
Number of Cycles
1 hour at -55°C, 1 hour at +125°C
1,000
Performance
Capacitance Change |∆ C/C|
DF Change (∆tgδ)
Insulation Resistance
≤ 3%
≤ 50 x 10 -4 at 1 kHz
≥ limit value
No Mechanical Damage
Environmental Compliance
All KEMET surface mount capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
5
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Table 1 – Ratings & Part Number Reference
Dimensions in mm
VDC
Capacitance
Value (µF)
Size Code
Chip Size
New KEMET
Part Number
Legacy Part
Number
B
H
L
16
16
16
16
16
16
16
16
16
16
16
16
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
A
A
A
A
A
A
A
A
B
B
B
B
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
C
C
C
C
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
2.5
2.5
2.5
2.5
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.3
3.3
3.3
3.3
1.1
1.1
1.1
1.1
1.1
1.1
1.2
1.3
1.7
1.7
1.7
2.0
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.4
1.5
1.5
1.5
1.7
1.9
2.3
1.7
1.7
1.7
2.0
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1812
1812
1812
1812
DBAA2120(1)C5N0
DBAA2150(1)C5N0
DBAA2180(1)C5N0
DBAA2220(1)C5N0
DBAA2270(1)C5N0
DBAA2330(1)C5N0
DBAA2390(1)C5N0
DBAA2470(1)C5N0
DBAB2560(1)C5N0
DBAB2680(1)C5N0
DBAB2824(1)C5N0
DBAB3100(1)C5N0
DBCA1330(1)C5N0
DBCA1390(1)C5N0
DBCA1470(1)C5N0
DBCA1560(1)C5N0
DBCA1680(1)C5N0
DBCA1820(1)C5N0
DBCA2100(1)C5N0
DBCA2120(1)C5N0
DBCB2150(1)C5N0
DBCB2180(1)C5N0
DBCB2220(1)C5N0
DBCB2270(1)C5N0
DBCB2330(1)C5N0
DBCB2390(1)C5N0
DBCB2470(1)C5N0
DBCC2560(1)C5N0
DBCC2680(1)C5N0
DBCC2824(1)C5N0
DBCC3100(1)C5N0
LDBAA2120(1)C5N0
LDBAA2150(1)C5N0
LDBAA2180(1)C5N0
LDBAA2220(1)C5N0
LDBAA2270(1)C5N0
LDBAA2330(1)C5N0
LDBAA2390(1)C5N0
LDBAA2470(1)C5N0
LDBAB2560(1)C5N0
LDBAB2680(1)C5N0
LDBAB2824(1)C5N0
LDBAB3100(1)C5N0
LDBCA1330(1)C5N0
LDBCA1390(1)C5N0
LDBCA1470(1)C5N0
LDBCA1560(1)C5N0
LDBCA1680(1)C5N0
LDBCA1820(1)C5N0
LDBCA2100(1)C5N0
LDBCA2120(1)C5N0
LDBCB2150(1)C5N0
LDBCB2180(1)C5N0
LDBCB2220(1)C5N0
LDBCB2270(1)C5N0
LDBCB2330(1)C5N0
LDBCB2390(1)C5N0
LDBCB2470(1)C5N0
LDBCC2560(1)C5N0
LDBCC2680(1)C5N0
LDBCC2824(1)C5N0
LDBCC3100(1)C5N0
VDC
Capacitance
Value (µF)
Size Code
B (mm)
H (mm)
L (mm)
Chip Size
New KEMET
Part Number
Legacy Part Number
(1) G = ±2%, J = ±5%.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
6
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Soldering Process
Reflow Recommendations
Preheating
Maximum Preheating Time
180 seconds
Minimum Temperature
150°C
Maximum Temperature
200°C
Maximum Time within Tmax and
Tmax – 5°C (∆T5)
Maximum Time Over 217°C
(∆T217)
Maximum Temperature Ramp Rate
30 seconds (Tmax ≤ 250°C)
10 seconds (250 °C < Tmax ≤ 260°C)
150 seconds
3°C/seconds (heating)
6°C/seconds (cooling)
Second reflow
If two reflow processes are needed, be sure that before the second reflow,
the temperature on the capacitor’s surface is lower than 50°C.
* For LDB series this value is 260 °C.
Maximum Temperature on Component Body (Tmax)
Capacitor
Capacitor Volume (mm3)
Hmax (mm)
< 350
350 – 2,000
> 2,000
< 1.6
255°C *
255°C *
255°C *
1.6 – 2.5
255°C *
250°C
245°C
> 2.5
250°C
245°C
245°C
*In line with JEDEC STD 020D ed. June 2007 with some limitations.
* For LDB series this value is 260 °C.
Flux/Cleaning/Storage and Moisture
Flux suggestions
We suggest to use a no-clean flux with a halogen content lower than 0.1%.
Cleaning suggestions
To clean the PCB assembly we suggest to use a suitable solvent like Isopropyl Alcohol, deionized water or neutral pH detergents.
Solvents like Toluene, Xylene and Trichloroethylene should not be used.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
7
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Flux/Cleaning/Storage and Moisture cont'd
Storage and moisture recommendations
KEMET SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 months shelf life
(temperature ≤ 40°C/relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled
temperature and humidity (temperature ≤ 30°C/relative humidity ≤ 60%) for 168 hours [MSL 3] (rated voltage ≤ 100 VDC) or 696 hours
[MSL 2a] (rated voltage > 100 VDC). For longer periods of time and/or higher temperature and/or higher relative humidity values, it
is absolutely necessary to protect the components against humidity. If the reel inside the MBB is partially used, KEMET recommends
to re-use the same MBB or to avoid areas without controlled temperature and humidity (see above). If the above conditions are not
respected, components require a baking (minimum time: 48 hours at 55 ± 5°C) before the reflow.
Manual assembly recommendations
If PCBs are assembled manually, care must be taken to avoid any mechanical damage to the
components. Our recommendations are the following (see Fig. 1):
1. When using tweezers, the components should be gripped across the two terminations (A);
2. Avoid any contact with the two cutting surfaces (C);
3. A vacuum pen is recommended on the top and bottom surfaces (B).
Manual soldering recommendations
LDE and LDB series have been designed for Surface Mount Technology, pick & place machines and reflow soldering systems. Using a
manual soldering iron, issues may occur because the typical temperature for manual soldering is around 350°C. Therefore please pay
careful attention:
• Never touch the capacitor body with the soldering iron but rather touch the soldering iron and the end termination with the tin wire
edge (see Fig. 2);
• If the soldering iron is equipped with a temperature controller device:
Set the temperature to 250 ± 3°C and proceed as per Fig. 2 (the maximum soldering time, on both terminations, is 5 seconds);
• If the soldering iron is NOT equipped with a temperature controller device:
This is the worst situation. The following are a few practical suggestions but, clearly, the operator’s experience is extremely important:
1. Proceed as per Fig. 2;
2. As soon as the tin wire starts melting, move the soldering iron away as quickly as possible;
3. Wait a few seconds and check that the soldering joint has been properly created;
• If the soldering iron is equipped with a hot air flow device:
Set the hot air temperature to 250 ± 3°C and do not send the hot air directly onto the capacitor plastic body. In this situation, the
operator’s experience is very important;
• In any case, avoid mass-mounting SMD Film Capacitors manually.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
8
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Packaging Quantities
Chip Size (EIA)
Height (mm)
Reel
1206
1.1
1.2
1.3
1.4
1.5
1.7
1.9
2.0
2.3
1.7
2.0
3000
3000
3000
2250
2250
2250
2250
2250
2250
4000
3000
1206
1206
1210
1210
1210
1210
1210
1210
1812
1812
Landing
Size
1206
1210
1812
Dimensions in mm
A
B
C
D
1.5
2.3
3
1.1
1.1
1.7
2.3
2.3
3.1
4.5
4.5
6.5
These landing area dimensions have the aim of taking full advantage of the new RoHS 6 terminations design.
We suggest to use a Sn/Ag/Cu solder paste (suggested thickness: 0.10 – 0.15 mm).
If a NOT Lead Free solder paste is used, a minimum peak temperature of 210°C on the component’s body is suggested.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
9
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Carrier Taping & Packaging (IEC 60286–2)
Horizontal Taping Orientation
Chip Size (EIA)
Horizontal
Mounting
1206
1210
1812
1812
Dimensions in mm
Taping Specification
W
H
L
W
P1
A0
B0
K0
D
W1
W2
Nominal
Nominal
Nominal
-0.1/+0.3
+/-0.1
Nominal
Nominal
Nominal
-/+2.0
-0/+2
Maximum
1.7
2.5
3.3
3.3
All
All
≤ 1.9
2.1 – 2.6
3.3
3.3
4.7
4.7
8
8
12
12
4
4
8
8
2
3
3.8
3.9
3.8
3.8
5.3
5.2
1.3
2.1
2
2.6
180
180
330
330
8
8
12
12
12
12
16
16
In accordance with IEC 60286-3
Materials:
- carrier tape: antistatic material
- cover tape: polyester + polythene
- reel: recyclable polystyrene
All parts in reels are packed in hermetically sealed Moisture Barrier Bag (MBB) Class 1.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
10
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel: 44-1279-460122
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
11
Surface Mount Metallized PPS Film Capacitors
LDB Series Unencapsulated Stacked Chip, Size 1206 – 1812, 16 and 50 VDC
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3082_LDB • 5/20/2015
12
Similar pages