ITT BKAE1A234MAC30001F00 Arinc 600 Datasheet

ARINC 600
BKAD/E/F
Low insertion force contacts.
Both environmental and non- environmental
versions.
Polarizing posts that are removable from the
mating face.
Field replaceable inserts for size 22 and
power contacts.
Up to 800 size 22 contacts in one connector.
Crimp, coax, power, printed circuit and wire
wrappable post style contacts.
Uses standard DPX crimp, insertion/extraction
tooling.
Waveguide connections available.
BKAD/E
BKAF
Rear Release/Rear Removable
Size 12, 16, 20, 22 Crimp Contacts
Front Release/Front Removable
Size 22 Solder Tail and Wrap Post Contacts
BKAD/E connectors represent a major milestones in
presenting a new rack and panel connector for
support of the air transportation market.
Several important design concerns have been addressed and solved in this new series. High mating
forces of pluggable modules in a rack have been
reduced by approximately two-thirds.
This new connector is totally intermateable and
intermountable with ARINC 600 connectors now in
the field.
The BKAF permits the user to easily replace a
contact in case of problems, rather than disassemble the entire connector--it is available with
size 22 contacts in wrap post or solder-tail versions. The system maintains the advantages of low
insertion force technology incorporated in all ARINC
600 connectors.
The low insertion force contacts are also interchangeable with the contacts used in the DPX
series and permit retrofit of existing equipment.
Pos-Aline Connector Construction Feature
In the ARINC 600 connector series, Size 22 contacts are the only size that utilize this design
feature. The hooded socket extends from its insulator while the pin contacts are shrouded by its
front insulator.
All other contacts used in this series employ standard contact design.
The result is that the complement of contacts for
the plug connectors will consist of pin contacts for
size 22 and socket contacts for all others. The
receptacle contacts will be just the reverse, socket
contact for size 22 and pin contacts for the
balance.
Material Specifications
BKAD
BKAE
BKAF
Specifications
Material
Aluminum alloy
Aluminum alloy
Aluminum alloy
QQ A-591/A380
Alodine
1200
Alodine
1200
Alodine
1200
MIL-C-5541
Finish
Material
Thermoset
Thermoset
Thermoset
N/A
Material
Copper alloy
Copper alloy
Copper alloy
QQ-C-533
Finish
Gold over Nickel
Gold over Nickel
Gold over Nickel
MIL-G-45204
Termination
Crimp
Crimp
P.C./Wrap Post
N/A
Grommets/Seals
Material
N/A
Silicone-based Elastomer
N/A
N/A
O-Ring
Material
N/A
Silicone-based Elastomer
N/A
N/A
Shell & Waveguide
Insulator
Contacts
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
2
ARINC 600
BKAD/E/F
How to Order
BKA
D
2
A234
M
*
3
00
01 *
F0
CONNECTOR SERIES
CLASS
SHELL SIZE
CONNECTOR LAYOUT DESCRIPTION
SIZE 1 COAX INSERT MODIFIER
BOEING COAX MODIFIER
SHELL STYLE
CONNECTOR MOUNTING MODIFIER
POLARIZING POSITION
MODIFIER (Contact, Finish, Material)
* = For Polarizing Position greater then 99, add third digit.
CONNECTOR SERIES
BKA (Per ARINC 600)
CLASS
D
E
- Non-environmental (rear release, crimp
-
F
-
C
-
S
-
T
-
contacts)
Environmental (rear release, crimp contacts)
Non-environmental (front release, solder
and wrap post #22 contact, rear release
all others)
Same as E, except uses BKAD shells, and
Less 0 rings on plug side.
Environmental (0-ring is used to seal
between connector shell and insulators)
with rear release, crimp contacts.
Non-environmental connector using filtered contacts (reference Cannon Phoenix)
BOEING COAX MODIFIER
Boeing
Coax
Code
ITTC
Code
Plug Connector
AA
Blank
No Coax Supplied
No Coax Supplied
AB
B
349-0013-000
349-0014-000
AC
C
349-0015-000
349-0016-000
AD
D
349-0013-000
349-0017-000
349-0014-000
349-0002-000
AE
E
349-0015-000
349-0018-000
349-0016-000
349-0004-000
AF
F
349-0015-000
349-0017-000
349-0016-000
349-0002-000
ITTC Coax Contacts Supplied
Receptacle Connector
SHELL STYLE
3 - Plug (rack side)
4 - Receptacle (box side)
CONNECTOR MOUNTING MODIFIER
00 01 -
Standard design, .148 dia. holes
With #6-32 ESNA (#12 NCFMA2-62) clinch
nuts (see chart)
SHELL SIZE
1
2
3
- Max. contact capacity - 125
- Max. contact capacity - 400
- Max. contact capacity - 800
CONNECTOR LAYOUT DESCRIPTION
(See page 4)
SIZE 1 COAX INSERT MODIFIER
M
- Connector contains modified 71W1 or
2W2 insert (four MTG screw hole locations and coaxial contact used in this
insert are interchangeable between different manufacturers
NOTE: A dash must be inserted whenever code does not apply.
02 03 08 -
09 -
16 -
17 -
23 -
Number of Clinch Nuts
Connector
Size
Plug
1
4
2
4
6
3
8
10
Receptacle
4
Size 1 receptacle only - less 3 printed circuit
board mounting lugs
With #4-40 ESNA (#22 NCFMA2-40) clinch
nuts (see chart)
Size 2 and 3 plug and receptacle only - with
#4-40 ESNA (#22 NCFMA2-40) clinch nuts
(all mounting holes)
Size 2 and 3 plug and receptacle only - with
#6-32 ESNA (#12 NCFMA2-62) clinch nuts
(all mounting holes)
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with non-environmental inserts.
Same as - 00 mounting modification except
with nickel finished shells .0008 - .0012 thick
with EMI grounding spring for plug shells and
supplied with environmental inserts not potted
into shell.
With floating eyelets (.048 min. radial float)
4 corner holes per connector.
Consult factory if other modifications are required
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
3
A R INC 600
B K A D/E /F
How to Order (Continued)
CONNECTOR LAYOUT DESCRIPTION Note: All layouts with "OPEN' insert cavity are not supplied with an insulator. If a Blank insert is required please consult factory.
Three Digit Number Contained within the Shell Layout Indicates Total Number of Contacts Available (including Waveguide)
Shell Cavity Identification
Shell
Size
A
B
C
5W2
-T173
2
150
10T10
13W2
OPEN
234
2
150
71W1
13W2
709
OPEN
A234
2
71W1
150
13W2
727
5W2
-246
2
120T2
120T2
6T6
Open
5W2
-248
2
121
121
6T6
60
OPEN
250
2
OPEN
150
100
60
60
5W2
250A
2
150
BLANK
100
2
OPEN
OPEN
13W2
-251
2
Waveguide
150
100
-017
2
2W2
2W2
13W2
-300
2
150
150
OPEN
-071
2
OPEN
71W1
OPEN
-306
2
150
150
6T6
A071
2
71W1
OPEN
OPEN
-313
2
150
150
13W2
-085
2
Waveguide
71W1
13W2
-370
2
150
120T2
100
A085
2
71W1
Waveguide
13W2
-400
2
150
150
100
86M
2
2W2
71W1A
13W2
-021
3
4W4
4W4
13W2
BLANK
OPEN
OPEN
-093
2
4W4
4W4
85
-026
3
OPEN
OPEN
13W2
OPEN
OPEN
13W2
-100
2
OPEN
OPEN
100
-113
3
OPEN
OPEN
100
OPEN
OPEN
13W2
-137
2
121
10T10
6T6
-A113
3
OPEN
OPEN
13W2
OPEN
OPEN
100
-T141
2
120T2
10T10
13W2
-114
3
4W4
4W4
4W4
4W4
13W2
85
-142
2
71W1
71W1
OPEN
-284
3
71W1
71W1
OPEN
71W1
71W1
OPEN
-155
2
71W1
71W1
13W2
-310
3
71W1
71W1
13W2
71W1
71W1
13W2
155M
2
71W1A
71W1A
13W2
-330M
3
2W1
2W2
13W2
150
150
13W2
V155M
2
71W1B
71W1A
13W2
-A330M
3
150
150
13W2
2W2
2W2
13W2
158M
2
2W2
71W1A
85
-496
3
121
121
121
121
6T6
6T6
-A158M
2
2W2
71W1B
85
-600
3
150
150
OPEN
150
150
OPEN
-163
2
OPEN
150
13W2
-626
3
150
150
13W2
150
150
13W2
A163
2
150
OPEN
13W2
-713
3
150
150
100
150
150
13W2
-164
2
150
Waveguide
13W2
A713
3
150
150
13W2
150
150
100
A164
2
Waveguide
150
13W2
-734
3
150
150
100
150
150
3W
165M
2
150
2W2
13W2
-764
3
150
150
64
150
150
100
-A165M
2
2W2
150
13W2
-800
3
150
150
100
150
150
100
-167
2
4W4
150
13W2
-269M
3
2W2
2W2
13W2
2W2
150
100
173M
2
2W2
71W1B
100
271C
3
4W4
4W4
13W2
BLANK
150
100
271M
3
2W2
2W2
13W2
4W4
150
100
-326
3
OPEN
150
13W2
OPEN
150
13W2
Shell
Size
A
B
-005
1
OPEN
OPEN
-060
1
OPEN
60
A060
1
60
OPEN
-065
1
OPEN
60
A065
1
60
-120
1
60
-125
1
-013
C
D
E
F
Ref. ARINC
Characteristic
Shell Cavity Identification
Connector
Layout
Connector
Layout
708
D
E
F
Ref. ARINC
Characteristic
732
NOTE. ANY OTHER COMBINATION OF INSERTS WITHIN A SPECIFIC SHELL IS AVAILABLE UPON REQUEST
Layout included in the following ARINC configurations 702, 710, 711, 712, 714, 715, 716, 723.
Layout included in the following ARINC configurations 707, 718 & 730.
Layout included in the following ARINC configurations 701, 702, 703, 704, 705, 706, 724, 725.
Layout included in the following ARINC configurations 701, 717, 726, 729.
POLARIZING POSITION
01 thru 99 (per ARINC 600)
Blank-Polarizing posts or keys not installed but
supplied with connector
MODIFIER (Contact, Finish, Material)
Blank - Rear release, crimp, signal and power
contacts supplied with connector
(when applicable)
FO Contacts not supplied with connector
(FO not stamped on connector)
FOO - Less contacts and waveguide (FOO not
stamped on connector)
SA Front release .025(0.63) D. x .150
(3.81) solder post and crimp, rear release power contacts (when applicable) supplied with connector
SB Front release .025(0.63) D. x .250
(6.35) solder post and crimp, rear release power contacts (when applicable) supplied with connector
SC -
SD -
WA -
WB -
Front release .025(0.63) D. x .375
(9.53) solder post and crimp, rear release power contacts (when applicable) supplied with connector
Front release .025(0.63) D. x .500
(12.7) solder post and crimp, rear release power contacts (when applicable) supplied with connector
Front release .025(0.63) Sq. x .250
(6.35) (1 wrap) wrap post and crimp,
rear release power contacts (when applicable) supplied with connector
Front release .025(0.63 Sq. x .375
(9.53) (2 wraps) wrap post and crimp,
rear relase power contacts (when applicable) supplied with connector
WC -
WD -
Front release .025(0.63) Sq. x 500
(12.7) (3 wraps) wrap post and crimp,
rear release power contacts (when applicable) supplied with connector
Front release .025 (0.64) Sq. x 641
(16.28) (3 wraps) wrap post and
crimp, rear release power contacts
(when applicable) supplied with connector
NOTE: COAXIAL CONTACTS TO BE ORDERED SEPARATELY
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
4
ARINC 600
BKAD/E/F
Shell Dimensions - Size 1
Plug
BKAE SERIES
1.402 (35.61)MAX
.205 (5.21)*
.195 (4.95)
.130 (3.30)
.120 (3.05)
1.110 (28.19)
1.090 (27.69)
1.195 (30.35)MAX
.655 (16.64)
.645 (16.38)
.385 (9.78) MAX
BKAD SERIES
1.102 (27.99) MAX
.125 (3.18)*
.105 (2.67)
.5.465 (138.81)
5.455 (138.56)
.148 +_ .003 (3.76 +_ 0.08)DIA
4 PLCS MTG HOLES
1.150(29.21)MIN
.653 (16.59)
.647 (16.43)
A
.180 (4.57)
.166 (4.22) D
4 PL
A
6.995 MAX
(177.67)
3.825 (97.16)
3.815 (96.90)
.135 (3.43)*
.115 (2.92)
B
6.355 (161.42)
6.345 (161.16)
B
6.500 MAX
(165.10)
6.645 (168.78)
6.629 (168.38)
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
.030 (.76)R
MAX 4 PL
C
.479 (12.17)
.469 (11.91)
.250
(6.35)
MAX
.135 (3.43)
.125 (3.18)
.188 (4.78)
.184 (4.67)
.575 (14.60)
.565 (14.35)
BKAD SERIES
1.198 (30.43) MAX
BKAE SERIES
1.550 (39.37) MAX
.705 (17.91)
.695 (17.65)
Retainer Plate
.030 R MAX
(.76)
4 PL
.120 R MAX
(3.05)
4 PL
.6.515 MIN
(165.48)
6.353
(161.37)
6.347
(161.21)
C
.620MIN
(15.75)
.830 (21.08)
.820 (20.83)
6.890
(175.01)
MIN
.608 MAX
(15.44)
3.85 (9.78)
3.75 (9.52)
.191 (4.85)
189 (4.80)
3 PL
Size 1 Plug
Panel Cutout
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Receptacle
BKAE SERIES
1.531 (38.89) MAX
BKAD/BKAF SERIES
1.221 (31.01) MAX
.205 (5.21)*
.195 (4.95)
1.010 (25.65)
.990 (25.15)
.130 (3.30)
.120 (3.05)
.148 +_ .003 (3.76 +_ 0.08)DIA
4 PLCS MTG HOLES
.135 (3.43)*
.115 (2.92)
B
7.455 MAX
(189.36)
6.355 (161.42)
6.345 (161.16)
3.825 (97.16)
3.815 (96.90)
.030 R
(.76)
MAX
2 PL
6.870
(174.50)
MIN
6.627 (168.33)
6.607 (167.82)
6.353
(161.37)
6.347
(161.21)
B
2.059 (52.30)
2.049 (52.04)
1.313 (33.35)
1.303 (33.10)
.191 (4.85) 2 PL
.189 (4.80)
A
A
5.465 (138.81)
5.455 (138.56)
.240 (6.10)MAX
.655 (16.64)
.645 (16.38)
.125 (3.18)*
.105 (2.67)
.287 R (7.29)
MAX 4 PL
.240
(6.10)
MAX
C
.120 R (3.05)
MAX 4 PL
C
.135 (3.43)
.125 (3.18)
.810 (20.57)
.800 (20.32)
.575 (14.60)
.565 (14.35)
.180 (4.57)
.166 (4.22) D
4 PL
BKAD/BKAF SERIES
1.317 (33.45) MAX
.188 (4.78)
.184 (4.67)
BKAE SERIES
1.670 (42.42)
.705 (17.91)
.695 (17.65)
Retainer Plate
Size 1 Receptacle
3.65 (9.27)
3.55 (9.02)
.930 (23.62) MIN
.653
(16.59)
.647
(16.43)
Panel Cutout
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
5
ARINC 600
BKAD/E/F
Shell Dimensions - Size 2
Plug
1.810 (45.97)
1.790 (45.47)
1.431 (36.35)
1.421 (36.09)
BKAE SERIES
1.402 (35.61) MAX
.130 (3.30)
.120 (3.05)
.655 (16.64)
.645 (16.38)
1.195 MAX
(30.35)
.148 +_ 003 (3.76 +
_ 0.08) DIA
10 PLCS MTG HOLES
BKAD SERIES
1.102 (27.99) MAX
260 (6 60)*
250 (6 35)
653 (16.59)
647 (16.43)
191 (4.85)
189 (4.80)
3PL
.070 (1.78)*
.050 (1.27)
030 (.76) R
MAX 4 PL
A
A
5.355 (136.02)
5.345 (135.76)
030 R
(.76)
MAX
4 PL
6.360 (161.54)
6.340 (161.04)
B
135 (3.43)*
115 (2.92)
6 995 MAX
(177.67)
B
3 770 (95.76)
3 760 (95.50)
6.500 MAX
(165.10)
6.353
(161.37)
6.347
161.21
6.645 (168.78)
6.629 (168.38)
120 R
(3.05)
MAX
4 PL
2 004 (50.90)
1 994 (50.65)
1 258 (31.95)
1 248 (31.70)
2.135 (54.23)
2.125 (53.98)
.620 MIN
(15.75)
C
188(4.78)
184(4.67)
BKAD SERIES
1.198 (30.43) MAX
BKAE SERIES
11550 (39.37) MAX
1 415 (35.94)
1 405 (35.69)
Retainer Plate
.180
(4.57)
166 D
(4.22)
8 PL
C
168 (4.27)
158 (4.01)
.865 (21.97)
.855 (21.72)
6.515 MIN
(165.48)
6.890
(175.01)
MIN
.608 MAX
(15.44)
1.429
(36.30)
1.423
(36.14)
1.850 MIN
(46.99)
385
(9.78)
375
(9.52)
Size 2 Plug
250 MAX
(6.35)
Panel Cutout
* This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Receptacle
1.810 (45.97)
1.790 (45.47)
BKAE SERIES
1.531 (38.89) MAX
1.431 (36.35)
1.421 (36.09)
BKAD/BKAF SERIES
1.221 (31.01)MAX
.655 (16.64)
.645 (16.38)
130 (3.30
.120 (3.05)
.148 .003 (3.76 +_ 0.08) DIA.
10 PLCS MTG HOLES
260 (6.60)*
250 (6.35)
1.530
(38.86)
MIN
191 (4.85)
189 (4.80)
2 PL
.070 (1.78)*
.050 (1.27)
240
(6.10)
MAX
030 R
(76)
MAX
2 PL
A
A
5.335 (136.02)
5.345 (135.76)
6.975 MAX
(177.16)
.135 (3.43)*
.115 (2.92)
6.360 (161.54
6.340 (161.04
B
B
6.870
(174.50)
MIN
6.353
(161.37)
6.347
(161.21)
.180
(4.57)
.166 D
(4.22)
10 PL
1.429
(36.30)
1.423
(36.14)
3 PL
3.770 (95.76)
3.760 (95.50)
.260
(6.60)
.230
(5.84)
2 PL
6.627 (168.33)
6.607 (167.82)
2.004 (50.90)
1.994 (50.65)
1.258 (31.95)
1.248 (31.70)
.865 (21.97)
.855 (21.72)
C
2.135 (54.23)
2.125 (53.98)
C
.168 (4.27)
.158 (4.01)
1.415 (35.94)
1.405 (35.69)
Retainer Plate
2.780
(70.61)
MAX
BKAD/BKAF SERIES
1.317 (33.45)
BKAE SERIES
1.670 (42.42)
.188 (4.78)
.184 (4.67)
Size 2 Receptacle
2.200
(55.88)
MIN
.120 R
(3.05)
MAX
4 PL
2.133
(54.18)
2.127
(54.03)
.365 (9.27)
.355 (9.02)
.240 MAX
(6.10)
.287 R
(7.29)
MAX
8 PL
.653 (16.59)
.647 (16.43)
2 PLC
Panel Cutout
*This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity.
For further information, refer to ARINC 600 specification or consult factory.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
6
ARINC 600
BKAD/E/F
Shell Dimensions - Size 3
Plug
3.275 (83.18)
3.245 (82.42)
BKAE SERIES
1.402 (35.61) MAX
2.891 (73.43)
2.881 (73.18)
1.150 MAX
(29.21)
.130 (3.50)
.120 (3.05)
.260 (6.60)*
.250 (6.35)
1.955 (49.66)
1.945 (49.40)
BKAD SERIES
1.102 (27.99) MAX
.655 (16.64)
.645 (16.38)
.148 +_ .003 DIA.
(3.76 +_ 0.08)
14 PLCS MTG HOLES
.070 (1.78)*
.060 (1.52)
3.310 MIN
(84.07)
1.953
(49.61)
1.947
(49.45)
.030 (.76)R
MAX 4 PL
5.355 (136.02)
5.345 (135.76)
.030 R MAX
(.76)
4 PL
6.355 (161.42)
6.345 (161.16)
.135 (3.43)*
.115 (2.92)
6.500
(165.10)
MAX
6.645 (168.78)
6.629 (168.38)
6.353
(161.37)
6.347
(161.21)
.120 R MAX
(3.05)
4 PL
6.515 MIN
(165.48)
6.995 MAX
(177.67)
.590 MAX
(14.99)
2.004 (50.90)
1.994 (50.65)
620 MIN
(15.75)
1.258 (31.95)
1.248 (31.70)
.385
(9.78)
.375
(.952)
2.135 (54.23)
2.125 (53.98)
.180
(4.57) D
.250
.166
(4.22) (6.35)
MAX
12 PL
.653
(16.59)
.647
(16.43)
3.770 (95.76)
3.760 (95.50)
1.68 (4.27)
.158 (4.01)
.890 (22.61)
.870 (22.10)
.188 (4.78)
.184 (4.67)
BKAD SERIES
1.198 (30.43) MAX.
1.252 (31.80)
1.242 (31.55)
1.440 (36.58)
1.430 (36.32)
BKAE SERIES
1.550 (39.37) MAX
.191 (4.85)
.189 (4.80)
3 PL
.2.889
(73.38)
2.883
(73.23)
2.712 (68.88)
2.702 (68.63)
2.875 (73.02)
2.865 (72.77)
Retainer Plate
Size 3 Plug
Panel Cutout
* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.
For furter information, refer to ARINC 600 specification or consult factory.
Receptacle
3.275 (83.18)
3.245 (82.42)
2.891 (73.43)
2.881 (73.18)
BKAE SERIES
1.531 (38.89) MAX
1.955 (49.66
1.945 (49.40)
BKAD/BKAF SERIES
1.221 (31.01)MAX
.130 (3.30)
.120 (3.05)
.260 (6.60)*
.250 (6.35)
5.355 (136.02)
5.345 (135.76)
3.000 (76.20) MIN
.148 +_ .003 DIA.
(3.76 +_ 0.08)
14 PLCS MTG HOLES
.655 (16.64)
.645 (16.38)
6.355 (161.42)
6.345 (161.16)
.135 (3.43)*
.115 (2.92)
6.627 (168.33)
6.607 (167.82)
6.975 MAX
(177.16)
2.004 (50.90)
1.994 (50.65)
2.875 (73.02)
2.865 (72.77)
.180 (4.57)
.166 (4.22)
14 PL
2.133
(54.18)
2.127
(54.03)
3.770 (95.76)
3.760 (95.50)
1.440 (36.58)
1.430 (36.32)
.030 R MAX
(.76)
2 PL
.120 R MAX
(3.05)
4.PL
2.780
(70.61)
MAX
2.135 (54.23)
2.125 (53.98)
1.258 (31.95)
1.248 (31.70)
.870 (22.10)
.850 (21.59)
2.889 (73.38)
2.883 (73.23)
3 PL
.287 R MAX
(7.29) 8 PL
.240 MAX
(6.10)
.070 (1.78)*
.060 (1.52)
1.68 (4.27)
.158 (4.01)
.191 (4.85)
.189 (4.80)
3 PL
1.252 (31.80)
1.242 (31.55)
.188 (4.78)
.184 (4.67)
BKAD/BKAF SERIES
1.317 (33.45)MAX
BKAE SERIES
1.670 (42.42 )MAX
.365
(9.27)
.355
(9.02)
.960
(24.38)
.930
(23.62)
2 PL
D
6.870
(174.50)
MIN
2.20
(55.88)
MIN
.240
(6.10)
MAX.
1.953
(49.61) 2 PL
1.947
(49.45)
.653
(16.59) 2 PL
.647
(16.43)
2.712 (68.88)
2.702 (68.63)
Retainer Plate
Size 3 Plug
Panel Cutout
* This dimension indicates distance form centerline of retaining screw to the centerline of first contact cavity.
For furter information, refer to ARINC 600 specification or consult factory.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
7
ARINC 600
BKAD/E/F
Contact Arrangements - Shell Size 1
BKAD/BKAE (Plug Rear face shown)
BKAF - Available Receptacle Shell Only
(Front Release)
Shell Cavity
A or B
A
B
Shell Cavity
C
C
B
C
Shell Cavity
A or B
D
B
C
Shell Cavity
C
D
1
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
9
9
2
5
1
A
1
6
7
1T
10
11
11
12
13
13
14
14
15
15
30T2
28 #22
2 #8 TWINAX/COAX
(#8 Grounded to
Shell)
C
D
2
2
2
4
5
D
4
4 #12
8
2
9
9
10
10
5
11
11
6
12
12
7
13
13
8
14
14
9
15
10
60
60 #22
1
3
4
3
4
8
3
3
2T
B
C
1
10
12
B
5W2
1 #12
2 #16
2 #5 COAX
5
15
B
40
40 #22
4
C
D
60
60 #22
5W2
1 #12
2 #16
2 #5 COAX
ENGAGING END SURFACE WHITE ON RED TO INDICATE
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE REAR REMOVAL CONTACTS
FRONT RELEASE FRONT REMOVAL CONTACTS
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
Contact Arrangements - Shell Sizes 2 and 3
BKAD/BKAE (Plug Rear face shown)
Shell Cavity
C or F
1
1
2
3
4
3
2
3
2
1
6
2
8
7
9
4
5
5
7
5
8
4
1
6
10
9
14
15
20
11
6
5
6
21
13
22
12
23
24
3
6**
6 #8
6T6**
6 #8
(Metallic Insert)
4
13W2
4 #20, 4 #12, 3 #16
2 #5 COAX
24T4**
20 #20, 4 #8
1
6
A
7
12
1
2
2
1
1
2
3
3
2
2
13
18
19
24
25
29
30
34
B
C
D
E
F
G
H
J
K
3
B
D
E
F
G
H
J
K
B
C
D
E
F
G
H
J
K
4
4
3
3
4
5
5
4
4
5
6
6
5
5
7
7
6
6
8
8
7
7
51
56
52
57
53
54
58
55
59
B
1
34**
24 #20, 10 #18
C
59**
50 #22, 5 #16, 4 #12
C
D
2
E
3
F
G
H
4
J
K
5
85
80 #22, 4 #20, 1 #16
8
8
9
9
10
10
B
C
D
E
F
G
H
J
K
100
100 #22
**Pending ARINC release.
NOTE: In layouts using #22 contacts mixed with any other contact size (20HD, 16, 12), the size #22 contact type (pin or socket) determines the insulator as a pin insert or a socket insert.
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE, REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
8
ARINC 600
BKAD/E/F
Contact Arrangements - Shell Sizes 2 and 3
BKAD/BKAE (Plug Rear face shown)
Shell Cavity
A,B,D,E
2W2
2 #1 COAX
49T2**
47 #20
2 #8
110**
100 #22
5 #12 & 5 #20
4W4
4 Modified
#1 COAX
(Metallic Insert)
10T10**
10 #8 TRIAX/COAX
(#8 Grounded to Shell)
(Metallic Insert)
24**
24 #12
60**
60 #20
71W1
70 #22
1 #1 COAX
71W1B
70 #22
1 #1 COAX
150
150 #22
120T2 **
118 #22
2 #8 TWINAX/COAX
(#8 Grounded to Shell)
121**
110 #22
5 #16
6 #20
** Pending ARINC release.
REAR SURFACE WHITE ON BLUE TO INDICATE REAR RELEASE. REAR REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
(For Contact Cavity Location and Contact Cavity Identification refer to ARINC 600 or consult factory)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
9
ARINC 600
BKAD/E/F
Contact Arrangements - Shell Sizes 2 and 3
BKAF - Available Receptacle Shell ONLY
(Front Release)
SHELL CAVITY
A, B, D, E,
71W1
70 #22
71W1B
70 #22
10T10**
10 #8
121F**
110 #22
6 #20
5 #16
150
150 #22
ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
BKAF - Available Receptacle Shell ONLY
(Front Release)
SHELL CAVITY C, F
6T6**
6 #8
13W2
4 #20
3 #16
4 #12
2 #5 COAX
100
100 #22
** Pending ARINC release.
NOTE #22 CONTACTS ARE SOCKETS, 20HD,16, 12 ARE PIN CONTACTS.
ENGAGING END SURFACE WHITE ON RED TO INDICATE FRONT RELEASE, FRONT REMOVAL CONTACTS FOR INSERTS CONTAINING STANDARD SIGNAL & POWER CONTACTS
(For Contacts Cavity Location and Contact Cavity Identification refer to ARINC 600 or Consult Factory)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
10
ARINC 600
BKAD/E/F
Waveguide Connections
WAVEGUIDE DETAIL
SHOWN FULLY ENGAGED
-E-
-A-
NO
ENGAGEMENT
1.255 (31.88)
1.370 (34.80)
1.310 (33.27)
.522 (13.26
FULLY
.488 (12.40) ENGAGED
CONN. PLUG
CONN.
RECEPTACLE
1.416 / 1.404
(35.97) / (35.61)
1.091 / 1.079
(27.71) / (27.41)
4 #8-32 UNC-2B
THRU HOLES
INSULATOR AND
WAVEGUIDE RETAINING
PLATE
2.810 (71.37)
2.690 (68.33)
Plug
Receptacle
Polarization (Engaging End)
BKA*1
BKA*2
BKA*3
CENTER
POST
CENTER
POST
CENTER
POST
CENTER
POST
CENTER
POST
CENTER
POST
RIGHT
POST
RIGHT
POST
RIGHT
POST
RIGHT
POST
RIGHT
POST
RIGHT
POST
LEFT
POST
LEFT
POST
LEFT
POST
LEFT
POST
LEFT
POST
LEFT
POST
PLUG
RECEPTACLE
PLUG
RECEPTACLE
PLUG
RECEPTACLE
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
11
ARINC 600
BKAD/E/F
Polarizing Positions
POST
KEY
Kit P/N 320-1067-000
Kit P/N 320-1067-003
Plug Shell
Position
Left
Post
Center
Post
Right
Post
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
21
22
23
24
25
3
4
5
6
1
26
27
28
29
30
31
32
33
34
35
Receptacle Shell
Position
Left
Post
Center
Post
Right
Post
Position
Left
Post
Center
Post
Right
Post
1
1
1
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
1
1
1
1
4
4
4
4
3
96
97
98
99
100
6
1
2
3
4
2
3
4
5
6
1
2
3
4
5
1
1
1
1
1
1
1
1
1
1
3
3
3
3
3
2
2
2
2
2
101
102
103
104
105
106
107
108
109
110
36
37
38
39
40
6
1
2
3
4
1
2
2
2
2
2
1
1
1
1
41
42
43
44
45
46
47
48
49
50
5
6
1
2
3
4
5
6
1
2
2
2
2
2
2
2
2
2
2
2
51
52
53
54
55
3
4
5
6
1
56
57
58
59
60
61
62
63
64
65
1
1
1
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
4
4
4
3
3
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
4
4
4
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
4
4
4
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
4
3
3
3
3
171
172
173
174
175
3
4
5
6
1
5
5
5
5
5
3
3
3
3
2
21
22
23
24
25
1
1
1
1
2
4
4
4
4
4
2
1
6
5
4
96
97
98
99
100
1
2
2
2
2
5
6
1
2
3
4
5
6
1
2
3
3
3
3
3
3
3
3
4
4
3
3
2
2
2
2
2
2
1
1
176
177
178
179
180
181
182
183
184
185
2
3
4
5
6
1
2
3
4
5
5
5
5
5
5
6
6
6
6
6
2
2
2
2
2
1
1
1
1
1
26
27
28
29
30
31
32
33
34
35
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
3
2
1
6
5
4
3
2
1
6
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
3
4
5
6
1
4
4
4
4
4
1
1
1
1
6
186
187
188
189
190
6
1
2
3
4
6
6
6
6
6
1
6
6
6
6
36
37
38
39
40
3
4
4
4
4
4
3
3
3
3
5
4
3
2
1
1
1
6
6
6
6
6
6
5
5
116
117
118
119
120
121
122
123
124
125
2
3
4
5
6
1
2
3
4
5
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
5
5
5
5
5
191
192
193
194
195
196
197
198
199
200
5
6
1
2
3
4
5
6
1
2
6
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
4
4
41
42
43
44
45
46
47
48
49
50
4
4
5
5
5
5
5
5
6
6
3
3
3
3
3
3
3
3
3
3
2
2
2
2
2
5
5
5
5
4
126
127
128
129
130
6
1
2
3
4
4
4
4
4
4
5
4
4
4
4
201
202
203
204
205
3
4
5
6
1
6
6
6
6
6
4
4
4
4
3
51
52
53
54
55
6
6
6
6
1
2
3
4
5
6
1
2
3
4
5
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
3
3
3
3
3
131
132
133
134
135
136
137
138
139
140
5
6
1
2
3
4
5
6
1
2
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
2
2
206
207
208
209
210
211
212
213
214
215
2
3
4
5
6
1
2
3
4
5
6
6
6
6
6
6
6
6
6
6
3
3
3
3
3
2
2
2
2
2
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
6
1
2
3
4
2
2
2
2
2
3
2
2
2
2
141
142
143
144
145
3
4
5
6
1
4
4
4
4
5
2
2
2
2
1
216
6
6
2
71
72
73
74
75
5
6
1
2
3
2
2
3
3
3
2
2
1
1
1
146
147
148
149
150
2
3
4
5
6
5
5
5
5
5
1
1
1
1
1
1
2
3
Left
Post
Position
Left
Post
Center
Post
Right
Post
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
5
5
5
5
5
5
6
6
6
6
6
6
1
1
1
1
1
1
2
2
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
2
2
2
2
5
4
3
2
1
171
172
173
174
175
2
2
2
2
3
6
6
6
6
6
2
1
6
5
4
2
2
3
3
3
3
3
3
4
4
2
2
2
2
2
2
2
2
1
1
6
5
4
3
2
1
6
5
4
3
176
177
178
179
180
181
182
183
184
185
3
3
3
3
3
4
4
4
4
4
6
6
6
6
6
5
5
5
5
5
3
2
1
6
5
4
3
2
1
6
111
112
113
114
115
4
4
4
4
5
1
1
1
1
1
2
1
6
5
4
186
187
188
189
190
4
5
5
5
5
5
5
5
5
5
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
116
117
118
119
120
121
122
123
124
125
5
5
5
5
5
6
6
6
6
6
1
1
1
1
1
1
1
1
1
1
3
2
1
6
5
4
3
2
1
6
191
192
193
194
195
196
197
198
199
200
5
5
6
6
6
6
6
6
1
1
5
5
5
5
5
5
5
5
5
5
6
5
4
3
2
1
6
5
4
3
3
3
3
3
3
2
1
6
5
4
126
127
128
129
130
6
1
1
1
1
1
1
1
1
1
5
4
3
2
1
201
202
203
204
205
1
1
1
1
2
5
5
5
5
5
2
1
6
5
4
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
2
1
6
5
4
3
2
1
6
131
132
133
134
135
136
137
138
139
140
1
1
2
2
2
2
2
2
3
3
1
1
1
1
1
1
1
1
1
1
6
5
4
3
2
1
6
5
4
3
206
207
208
209
210
211
212
213
214
215
2
2
2
2
2
3
3
3
3
3
5
5
5
5
5
5
5
5
5
5
3
2
1
6
5
4
3
2
1
6
66
67
68
69
70
2
3
3
3
3
3
3
3
3
3
5
4
3
2
1
141
142
143
144
145
3
3
3
3
4
1
1
1
1
6
2
1
6
5
4
216
3
5
5
71
72
73
74
75
3
3
4
4
4
3
3
2
2
2
6
5
4
3
2
146
147
148
149
150
4
4
4
4
4
6
6
6
6
6
3
2
1
6
5
Position
4
5
Center
Post
Right
Post
Position
Left
Post
Center
Post
Right
Post
6
Dark area represents post
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
12
ARINC 600
BKAD/E/F
Contact and Termination Tooling Data
BKA* (LIF) Crimp Contacts
Contact Size and Part Numbers
Part Numbers
Crimp Tooling
Tool P/N
MIL
Spec.
ITT
Cannon
Selector#
Insertion/Extraction Tooling
Locator P/N
Mil Spec.
ITT
Cannon
3
3
4
M22520
/2-23
995-0002015
M81969
/1-01
M22520 995-0001/2-01
584
6
7
M22520
/2-08
995-0001604
M81969
/1-02
-
-
Used in Plug
031-1303-000
M22520 995-0001/1-01
585
4
5
6
M22520
/1-02
995-0001736
M81969
/1-03
-
Used in Plug
031-1308-000
M22520 995-0001/1-01
585
7
8
M22520
/1-11
995-0002027
M81969
/14-04
-
Size
Pin
Socket
2222
Used in Plug
030-2259-000
Used in Recep.
031-1287-000
M22520 995-0001/2-01
584
Used in Recep
2020HD 030-2273-000
Used in Plug
031-1302-000
1616
Used in Recep
030-2280-000
1212
Used in Recep
030-2286-000
Wire Size
ITT Cannon
MIL
Spec.
Insertion
Extraction
Insul
AWG
Dia. Max
Ins./Ext.
CIT-DPXMA-22-1 CET-DPXMA-22 980-0004-804
Metal
Metal
Metal Tip
070256-0000
070317-0000
Strip
Length
26
24
22
.054
(1.4)
.130/.110
(3.3)/(2.8)
980-0004-805
Metal Tip
22
20
.071
(1.8)
.167/.147
(4.2)/(3.7)
CET 16-9
Plastic
980-0004-806
Metal Tip
20
18
16
.103
(2.6)
.207/.230
(6.9)/(5.8)
CET 12-4
Plastic
CIET-12
Plastic
14
12
.135
(3.4)
.270/.230
(6.9)/(5.8)
BKA* Thermocouple Contacts
Contact Size and Part Numbers
Part Number
Size
Pin
Socket
2222
Alumel
Used in Plug
030-1975-009
Used in Recep.
031-1113-009
Used in Plug
2222
Chromel 030-1975-010
Used in Recep.
031-1113-010
Crimp Tooling
Tool P/N
MIL
Spec.
ITT
Cannon
Selector#
M22520
/2-01
995-0001
584
3
3
4
Insertion/Extraction Tooling
Locator P/N
Mil Spec.
ITT
Cannon
M22520
/2-23
995-0002015
Wire Size
ITT Cannon
MIL
Spec.
Insertion
M81969
/1-01
Extraction
Insul
AWG
Dia. Max
Ins./Ext.
CIT-DPXMA-22-1 CET-DPXMA-22 980-0004-804
Metal
Metal
Metal Tip
070256-0000
070317-0000
26
24
22
.054
(1.4)
Strip
Length
.130/.110
(3.3)/(2.8)
BKAF-ARINC 600 Size 22 Wrap Post Socket Contacts With .025(6.35) Square Wire-Wrappable Tails-Receptacle Only.
The new low insertion force, front-insertable, front-removable #22 socket
contacts with .025(6.35) square wire wrappable tails are now available for use
in the BKAF non-enviornmental receptacle version only.
These contacts can be sold separately or they can be supplied with a connector
(see How to Order). Use part numbers shown in the table on the right when
ordering separately.
Contact Mod.
Part Number
Number
of Wraps
WA
031-1351-000
1
Min. Post
Extension
Extraction Tool
.250 (6.35)
WB
031-1351-001
2
.375 (9.52)
WC
031-1351-002
3
.500 (12.70)
WD
031-1351-003
3
.641 (16.28)
CET-BKAF 22S
BKAF Printed Circuit Solder Post Socket Contacts Size 22 with .025(6.35) Dia. Printed Circuit Tails-Receptacle Only.
The new low insertion force, front-insertable, front-removable #22 socket
contacts with .025(6.35) dia., PC tails are now availble for use in the BKAF
non-environmental receptacle version only.
These contacts can be sold separately or they can be supplied with a connector
(see How to Order). Use part numbers shown in the table on the right when
ordering separately.
Contact Mod.
Part Number
SA
031-1352-000
.150 (3.81)
BKAD/F Solder Post, Power Pin Contacts (Captive)-Receptacle Only.
Contacts are captivated between two unbonded insulator halves.
Min. Post Extension
Extraction Tool
SB
031-1352-001
.250 (6.35)
SC
031-1351-002
.375 (9.52)
SD
031-1352-003
.500 (12.70)
Contact Size
2D HD
Part Number
Post Dia.
030-2358-000
.032 (0.81)
.150 (3.81)
16
030-2357-000
.050 (1.27)
.150 (3.81)
12
030-2356-000
.081 (2.06)
.150 (3.81)
CET-BKAF 22S
Min. Post Extenstion*
*Consult facotry for other available lengths
BKAF Solder Post Pin Contact Front Release
Post Dia.
Min. Post
Extension
Contact Size
Part Number
20HD
030-3287-000
.030 (0.76)
.300* (7.62)
Extraction Tool
317-1798-00
16HD
030-3287-001
.050 (1.27)
.300* (7.62)
317-1798-02
12HD
030-3287-002
.081 (2.06)
.300* (7.62)
317-1798-02
*Applies to BKAF 13W2 and 5W2 inserts only
Front Release Pin Contacts Size 20 and 16
Contact Size
Part Number
PC Tail Dia.
20
030-3296-001
.034 (0.86)/.030 (0.76)
.260 (6.60)
20
030-3296-002
.034 (0.86)/.030 (0.76)
.385 (9.78)
16
030-3297-001
.052 (1.32)/.048 (1.22)
.260 (6.60)
16
030-3297-002
.052 (1.32)/.048 (1.22)
.385 (9.78)
16
030-3297-005
.052 (1.32)/.048 (1.22)
.300 (7.62)
20
030-3296-004
.034 (0.86)/.030 (0.76)
.300 (7.62)
Min. Post Extension
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
13
ARINC 600 Rack and Panel Connectors
BKAD/E/F
Size 5 Coax Contact (Rear insertable/removable)
Crimp Center Contact-Conforming to ARINC 600
Crimp Tooling
Center Contact
Part Number
Outer Shell
Tool
Locator
Cable
Accommodation
Pin
(Receptacle
Connector)
Socket
(Plug
Connector)
MIL Spec
ITT Cannnon
RG-58C/U
BA-5903
(BG)
349-0014-000
349-0013-000
M22520/2-01
5021K1011
(Raychem)
349-0016-000
349-0015-000
RG-223
349-1060-100
MIL STD
ITT Cannon
Daniels
ITT Cannon
Frame
Jaw
Complete
Tool
Extraction
Tool
995-0001-584
K-345
995-0002-049
M22520/5-01
M22520/5-45B
CCT-HX3-156
CET-C8
M22520/2-01
995-0001-584
K-345
995-0002-049
M22520/5-01
M22520/5-45B
CCT-HX3-156
CET-C8
349-1059-000
M22250/2-01
995-0001-584
K-345
995-0002-049
M22520/5-01
M22520/5-45B
CCT-HX3-156
CET-C8
RG-400
-
349-1003-000
M22250/2-01
995-0001-584
K-345
995-0002-049
M22520/10-01
M22520/10-23
-
CET-C8
RG-316
-
349-1004-000
M22250/2-01
995-0001-584
K-345
995-0002-049
M22520/10-01
M22520/10-23
-
CET-C8
Size 12 Shielded Contact (Rear insertable/removable)
Crimp Tooling
Center Contact
Part Number
Tool P/N
Locator P/N
Cable
Accommodation
Pin
(Receptacle
Connector)
Socket
(Plug
Connector)
MIL Spec
ITT
Cannon
RG-196A/U
249-1767-000
-
M22520/2-01
995-0001-584
K-182
995-0002-051
5071
(HW)
249-1767-001
-
M22520/2-01
995-0001-584
K-182
RG-174/U
-
249-1768-000
M22520/2-01
995-0001-584
BMS-1348
(BG)
-
249-2203-000
M22520/2-01
995-0001-584
Outer Shell Tool
MIL Std
ITT
Cannon
Tool
Jaw
ITT
Cannon
MIL Spec
M22520/1-01
M22520/10-05A
995-0001-071
M81969/28-02
CET-12-4
Plastic
995-0002-051
M22520/1-01
M22520/10-05A
995-0001-071
M81969/28-02
CET-12-4
Plastic
K-182
995-0002-051
M22520/1-01
M22520/10-05A
995-0001-071
M81969/28-02
CET-12-4
Plastic
K-644
995-0002-050
M22520/1-01
M22520/10-05A
995-0001-071
M81969/28-02
CET-12-4
Plastic
Daniels
Frame
ITT
Cannon
Size 1 Modified Coaxial Contacts (4W4 Layout Only)
Plug Connector
Replacement Termination Kits
Coax
Cable Accommodation
Part Number
Style
Solder Type
CrimpType
RG214
349-1043-001
Straight
320-1066-000
320-1066-016
AA-5886
349-1048-000
Straight
320-1066-002
320-1066-018
RG393
349-1051-000
Straight
320-1066-003
320-1066-019
ECS 311201
349-1046-000
Straight
320-1066-001
320-1066-017
AA-5887
349-1049-000
Straight
320-1066-004
320-1066-013
AA-5888
349-1050-000
Straight
320-1066-005
320-1066-014
RG142
349-1047-000
Straight
320-1066-006
320-1066-015
Various
349-1047-001
TNC Adapter
-
-
Customer Use Drawings:
All Coax contacts (except 349-1047-001) customer use drawing #349-0000-305
Crimp termination kits: Customer use drawing #320-0000-305
Solder termination kits: Customer use drawing #320-0000-304
Receptacle Connector
Part Number
Coax
Style
Replacement Termination Kits
Solder Type
CrimpType
RG316 DS
349-1051-002
Straight
320-1066-008
N/A
RG142
349-1044-000
Straight
320-1066-007
N/A
Various
349-1042-000
SMA Adapter
Cable Accommodation
-
-
Customer Use Drawings:
Coax contacts 349-1051-002 and 349-1044-000 are located on cusomter use drawing #349-0000-304
Coax contacts 349-1042-000 is located on cusomter use drawing #320-1042-000
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
14
ARINC 600 Rack and Panel Connectors
BKAD/E/F
Sizes 1 Coax Contacts (71W1 layout only)
Same standard coax contacts as used in ITT Cannon's DPX (ARINC 404) connector series.
Receptacle Connector
Cable
Accommodation
RG-9/U
RG-214/U
Coax
Part Number
Replacement Coax
Termination Kit
Style
249-1521-000
249-1521-002
-
249-2201-000
NSA 935354
NSA 935355
RG-55/U
RG-58/U
RG-142/U
RG-400/U
249-1554-000
RG-58/U
RG-142/U
RG-225/U
249-1604-001
RG-402/U
UT-141
249-1604-002
RG-402/U
UT-141
SMA Jack
Termination
Replacement Coax
Body Assembly
021-0144-000
Straight
249-1554-002
021-0144-003
90˚
249-1604-003
021-0144-006
249-5027-008
Straight
249-5027-016
021-0144-001
249-5027-017
Straight
Coax
Part Number
Style
-
-
Plug Connector
Cable
Accommodation
RG-9/U
Replacement Coax
Termination Kit
249-1522-000
NSA 935354
NSA 935355
249-1522-002
-
RG-58/U
RG-142/U
249-1882-000
RG-402/U
249-1885-002
RG-214/U
249-5123-000
RG-115/U
249-5123-001
Replacement Coax
Body Assembly
Straight
Straight
249-2202-000
021-0144-004
320-0051-000
021-0144-011
249-5027-013
Straight
021-0144-008
249-5027-015
Sizes 1 Coax Contacts (To be used with connectors containing 71W1A, 71W1B and 2W2 insert modifier-"M")
Designed to be interchangeable with contacts made by other manufacturers.
Receptacle Connector
Cable
Accommodation
Part Number
Plug Connector
Style
RG-142B/U
RG-402/U
UT-141
349-0021-000
Right Angle
349-0022-000
Right Angle
SMA Jack
Termination
349-0023-000
Straight
RG-214/U
RG-393/U
BA-6903
(BG)
349-0002-000
Straight
5012H3012
(Raychem)
349-0004-000
Straight
RG-142B/U
349-0006-000
RG-402/U
UT-141
349-0008-000
Straight
Straight
Cable
Accommodation
Standard Size 1
Part Number
Modular Size 1
Part Number
Termination Kit for
Modular Size 1 Coax
RG-214/U
349-0017-000
349-1053-003
RG-393/U
349-0017-000
-
-
BA-6903
349-0017-000
349-1053-007
320-1066-003
5012H3012
(Raychem)
349-0018-000
-
-
Straight
RG-142B/U
349-0005-000
349-1053-006
320-1066-006
Straight
RG-402/U
UT-141
349-0007-000
-
-
Straight
AA-5888
-
349-1053-008
320-1066-005
Straight
ECS-310801
-
349-1053-005
-
Straight
AA-5886
-
349-1053-004
320-1066-002
Straight
BSX-7004-502
-
349-1053-003
-
Straight
ECS-311201
-
349-1053-002
320-1066-001
Straight
AA-5887
-
349-1053-001
320-1066-004
Straight
Adam Russell
PC-38
-
349-1053-000
-
Straight
Style
320-1066-000
Straight
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
15
ARINC 600 Rack and Panel Connectors
BKAD/E/F
Size 8 Coaxial Contacts
Plug Connector
**Termination
Contact Type
Socket
Part Number
Short
Long
Crimp
RR-RR
349-1087-000
-
-
X
Adams-Russell Co. Inc.
FC11Z
349-1087-001
-
-
X
Adams-Russell Co. Inc.
FC14Z
Short
Long
Crimp
RR-RR
349-1084-000
-
X
X
349-1084-001
X
-
X
349-1084-002
-
X
X
349-1084-003
X
-
X
349-1086-000
-
X
X
Adams-Russell Co. Inc.
FC11Z
349-1086-001
-
X
X
Adams-Russell Co. Inc.
FC14Z
*Engagement
Crimp
FR-RR
Solder
.250 (6.35)
FR-FR
.375 (9.52)
RF Cable
Number
Receptacle Connector
Contact Type
Socket
Part Number
**Termination
*Engagement
Crimp
FR-RR
FR-FR
.250 (6.35)
Solder
.375 (9.52)
RF Cable
Number
Size 8 Twinax Contacts
Plug Connector
**Termination
Contact Type
Socket
Part Number
Short
Long
Crimp
RR-RR
349-1006-000
-
-
X
M17/176-00002
349-1081-000
-
-
X
Tensolite Co.
24463/9 B017X-2 (LD)
Long
Crimp
RR-RR
*Engagement
Crimp
FR-RR
Solder
.250 (6.35)
FR-FR
.375 (9.52)
RF Cable
Number
Receptacle Connector
Contact Type
Socket
Part Number
**Termination
*Engagement
Short
Crimp
FR-RR
Solder
.250 (6.35)
FR-FR
.375 (9.52)
RF Cable
Number
M17/176-00002
349-1007-000
-
-
349-1080-000
X
-
X
X
349-1080-001
-
X
X
349-1080-002
X
-
X
349-1080-003
-
X
X
349-1082-000
X
-
X
Tensolite Co.
24463/9 B017X-2 (LD)
349-1082-001
-
X
X
Tensolite Co.
24463/9 B017X-2 (LD)
349-1088-000
-
X
Tensolite Co.
24463/9 B017X-2 (LD)
X
Size 8 Ground Contacts
Plug Connector
Contact Type
Socket
Part Number
031-3300-000
**Termination
*Engagement
Short
Long
-
-
Crimp
RR-RR
Crimp
FR-RR
Solder
.250 (6.35)
FR-FR
.375 (9.52)
X
Wire
Size
8, 10 AWG
Receptacle Connector
Contact Type
Socket
Part Number
**Termination
*Engagement
Short
Long
030-3306-000
-
X
030-3306-001
-
X
030-3676-000
-
-
Crimp
RR-RR
Crimp
FR-RR
Solder
.250 (6.35)
FR-FR
.375 (9.52)
X
8, 10 AWG
X
X
Wire
Size
8, 10 AWG
8, 10 AWG
* The electrical engagement of "Long" contacts is .150 (3.81) greater than the electrical engagement of "Short" contact.
**RR-RR indicates rear release, rear removal.
FR-RR indicates front release, rear removal.
FR-FR indicates front release, front removal.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
16
ARINC 600 Rack and Panel Connectors
BKAD/E/F
Sealing Plugs-BKAE Environmental Connnectors Only
P/N 225-0090-000
Material: Teflon
(All others thermoplastic)
B
A
Part
Number
Contact
Size
Color
A
B
C
225-1013-000
22
Black
.063 (1.6)
.040 (1.0)
.469 (11.9)
225-0070-000
20
Red
.085 (2.2)
.065 (1.6)
.469 (11.9)
225-0071-000
16
Blue
.115 (2.9)
.075 (1.9)
.469 (11.9)
225-0072-000
12
Yellow
.171 (4.3)
.121 (3.1)
.564 (14.3)
225-0090-000
#5 and #9 Coax
White
.365 (9.3)
.287 (7.3)
.835 (21.2)
B
A
C
C
Filler Plugs-BKAD Non-Environmental Connectors Only
P/N 225-0099-000
Material: Teflon
(All others thermoplastic)
B
A
B
A
Part
Number
Contact
Size
Color
B
C
225-0094-000
22
Black
.069 (1.7)
.051 (1.3)
.420 (10.7)
225-0095-000
20
Red
.083 (2.1)
.069 (1.7)
.350 (8.9)
225-0096-000
16
Blue
.131 (3.3)
.108 (2.7)
.320 (8.1)
225-0097-000
12
Yellow
.187 (4.7)
.156 (4.0)
.320 (8.1)
225-0098-000
#5 Coax
(Pin)
White
.275 (7.0)
.251 (6.4)
.450 (11.4)
225-0099-000
#5 and #9 Coax
(Socket)
White
.275 (7.0)
.251 (6.4)
1.061 (26.9)
C
C
BKAF P/N 225-1058-000
(Size 22 - Black)
(See Customer Use Drawing for details)
A
Cavity Reducer
#5 Coax to #12 Contact
Cavity reducers are available when additional circuits are required for siz 12 power contacts. These
reducers, having the internal configuration of size 12 power contact, are inserted into the size 5 coaxial
insulator cavity to create size 12 power contact cavity.
Pin
P/N 021-8756-000
Socket
P/N 021-8757-000
Dust Caps
Conductive dust caps protect against
static electricity.
Part Number
Description
Part Number
025-1121-001
BKAD 1-A & B-Plug
025-1155-001
Description
025-1122-001
BKAD 1-C-Plug
025-1156-001
BKAD 1-C-Receptacle
025-1123-001
BKAD 2&3-A & B-Plug
025-1157-001
BKAD 2&3-A & B-Receptacle
025-1124-001
BKAD 2&3-C-Plug
025-1158-001
BKAD 2&3-C-Receptacle
BKAD 1-A&B-Receptacle
Note: Supplied as standard for BKA product line only.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
17
ARINC 600 Rack and Panel Connectors
BKAD/E/F
Replaceable Inserts
Part Number
Layout
2W2**
A
4W4**
5W2
6
6T6
10T10
13W2
30T2
34
Class
Pin Assembly
BKAD
144-2944-000
Socket Assembly
144-2945-000
BKAE
144-2944-000
144-2945-000
BKAE
143-1156-001
143-1157-001
BKAD
177-1000-002
177-1001-004
BKAE
177-1000-002
177-1001-004
BKAD
143-1912-000
143-1913-000
BKAE
143-1912-001
143-1913-001
BKAF
143-1141-000
N/A
BKAE
143-1154-001
143-1155-001
BKAD
228-1026-002
228-1012-003
BKAE
228-1026-001
228-1012-001
BKAF
N/A
228-1015-001
BKAD
228-1027-002
N/A
BKAE
228-1027-001
228-1014-002
BKAD
143-1908-000
143-1909-000
BKAE
143-1908-001
143-1909-001
BKAF
143-1142-000
N/A
BKAD
143-1173-000
143-1174-000
BKAE
143-1173-001
143-1174-001
BKAD
143-1159-001
N/A
BKAE
143-1097-005
143-1098-005
143-1172-001
40
BKAE
143-1171-001
59*
BKAE
143-1167-001
143-1170-001
60-#20**
BKAE
143-3714-003
143-3715-003
BKAD
143-1910-000
143-1911-000
BKAE
143-1910-001
143-1911-001
BKAF
N/A
143-2065-000
BKAD
143-1958-000
143-1960-000
BKAE
143-1958-002
143-1960-002
BKAF
N/A
143-2090-000
BKAD
143-2085-001
143-2086-001
BKAE
143-2085-000
143-2086-000
BKAF
N/A
143-2066-000
BKAD
143-1113-000
143-1111-000
BKAE
143-114-000
143-1112-000
60-#22**
71W1
71W1A*
71W1B
85
100
110
120T2
121
150
BKAF
N/A
143-1118-000
BKAD
143-3877-000
143-3878-000
BKAE
143-3879-000
143-3880-000
BKAF
N/A
143-1178-000
BKAD
143-2015-000
143-2016-000
BKAE
143-2015-001
143-2016-001
BKAF
N/A
143-2067-000
BKAE
143-1182-000
143-1183-000
BKAD
N/A
143-1166-002
BKAE
143-1165-001
143-1166-001
BKAF
N/A
143-1177-000
BKAD
143-1150-002
143-1158-002
BKAE
143-1150-001
143-1158-001
BKAD
143-1906-000
143-1907-000
BKAE
143-1906-001
143-1907-001
BKAF
N/A
143-2068-000
Consult factory for Insert Part Numbers not listed.
*Modified 71W1 insert to be used with connectors containing 71W1 insert modifier "M"
**"Pin Inserts' accept receptacle coax contacts. "Socket Inserts" accept plug coax contacts.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
18
A R INC 600 R ack and Panel Connectors
B K A D/E /F
Cross Reference-Part Number/Customer-Use Drawing
COMPONENT
PART NUMBER
CUSTOMER USE
DRAWING NUMBER
COMPONENT
PART NUMBER
CUSTOMER USE
DRAWING NUMBER
143-1908-000
Contacts
143-1908-001
030-1975-009
030-1975-009
143-1909-000
030-1975-010
030-1975-010
143-1909-001
030-2259-000
030-2259-000
030-2273-000
030-2273-000
030-2280-000
030-2280-000
143-1911-000
030-2286-000
030-2286-000
143-1911-001
143-1910-000
143-1910-001
030-2356-000
030-2356-000
030-2357-000
030-2357-000
030-2358-000
030-2358-000
143-1913-000
031-1113-009
031-1113-009
143-1913-001
143-1912-001
031-1113-010
031-1113-010
031-1287-000
031-1302-000
031-1302-000
143-1960-000
031-1303-000
031-1303-000
143-1960-002
031-1308-000
031-1308-000
143-2015-000
031-1351-001
143-1958-002
143-2016-001
031-1351-003
143-2065-000
031-1252-000
143-2066-000
031-0000-344
143-0000-079
CUSTOMER USE
DRAWING NUMBER
Replacement Coax Termination Kit
249-1521-002
249-1521-002
249-1522-009
249-1522-010
249-1522-010
249-1522-010
249-1554-002
249-1554-002
249-1604-003
249-1604-003
249-1604-004
249-1604-004
249-2201-000
249-1521-002
249-2202-000
249-1522-010
249-5027-013
249-5027-013
249-5027-015
249-5027-007
249-5027-016
249-5027-016
320-0051-000
1250Y
320-1066-000
320-1066-001
320-1066-002
143-0000-078
143-2016-000
031-1351-002
031-1352-000
143-0000-080
143-1958-000
143-2015-001
031-0000-343
143-0000-077
143-1912-000
031-1287-000
031-1351-000
143-0000-081
COMPONENT
PART NUMBER
320-1066-003
320-000-305
320-1066-004
320-1066-005
320-1066-006
1247Y
Dust Caps
143-2067-000
025-1121-001
031-1252-002
143-2068-000
025-1122-001
031-1352-003
025-0000-054
143-2085-000
025-1123-001
(Conductive Only)
143-2085-001
Replacement Coax
Body Assembly
021-0144-000
021-0144-000
021-0144-001
021-0144-001
021-0144-002
021-0144-002
021-0144-003
021-0144-003
021-0144-004
021-0144-004
021-0144-006
021-0144-006
021-0144-008
021-0144-008
021-0144-011
021-0144-011
143-0000-079
025-1124-001
143-2086-000
025-1155-001
143-2086-001
025-1156-001
025-0000-055
025-1157-001
(Conductive Only)
Size #1 Coax Contacts
025-1158-001
249-1521-000
249-1521-000
249-1522-000
249-1522-000
249-1522-002
249-1522-002
225-0094-000
249-1554-000
249-1554-000
225-0095-000
249-1604-000
249-1604-000
225-0096-000
249-1604-001
249-1604-001
225-0097-000
Filler Plugs
225-0000-014
249-1604-002
249-1604-002
225-0098-000
349-0000-000
249-1882-000
249-1882-000
225-0099-000
349-0000-001
249-1882-002
1250Y
225-1058-000
349-0015-000
349-0000-002
249-1885-002
349-0016-000
349-0000-001
249-5027-008
249-5027-008
249-5027-017
249-5027-017
225-0072-000
225-0000-006
249-5123-000
249-5027-000
225-0090-000
225-0090-000
249-5027-007
225-1013-000
Size #5 Coax Contacts
349-0013-000
349-0014-000
349-1003-000
349-1009-000
349-000-301
249-5123-001
Size #12 Shielded Contact
249-1767-000
349-1053-001
249-1767-001
249-1767-001
349-1053-002
249-1768-000
249-1768-000
349-1053-003
249-2203-000
249-2203-000
349-1053-004
3491053-005
Replaceable Inserts
143-1907-001
225-0000-008
225-1015-000
349-0000-306
349-1053-006
143-1906-000
143-1906-001
225-1014-000
349-1053-000
249-1767-000
Sealing Plugs
349-1053-007
143-0000-079
349-1053-008
349-1053-009
143-1907-001
For part numbers not listed, consult ITT Cannon for applicalbe customer-use drawing.
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
19
ARINC 600 Rack and Panel Connectors
BKAD/E/F
ARINC 600 Connector Engaging Sequence
PLUG
RECEPTACLE
Mating
Sequence
#22
Flange
Position With:
Flange Spacing
in. (mm)
1
No Engagement
1.245 (31.62)
Nom.
2
Shells Initially
Engaged
1.110 (28.19)
1.073 (27.25)
3
Polarizing Pins
Entering Keys
1.073 (27.25)
1.023 (25.88)
Contacts Entering
Mating Insulator
#22
4
2
#22
.800 (22.32)
.748 (18.99)
#20
.805 (20.44)
.741 (18.82)
#16
1.012 (25.70)
.949 (24.10)
#12
1.008 (23.60)
.953 (24.20)
Miniature Coax
#12
1
#16
Contacts Electrically
Engaged
#20
MIN
COAX
#22
.642 (16.30)
.547 (13.89)
#20
.649 (16.48)
.553 (14.04)
#16
.728 (18.49)
.818 (20.77)
#12
.772 (19.60)
.692 (17.57)
Miniature Coax
1
5
7
NOTES:
E
(RACK SIDE)
A
(BOX SIDE)
1
1. Varies; See Mil-Spec. (#5 Coax)
2
2. Size 1 only.
(SHELLS FULLY MATED)
1
(NO ENGAGEMENT)
3. Flush head screws are not permitted for connector mounting
as they would position connector incorrectly.
6
"0" Ring Engagement
(BKAE Only)
.618 (15.70)
.578 (14.68)
4. Dimension 7 was calculated to provide clearance for
- MCU backplate mat'l thickness of 2.5 mm (.10 in).
- Rack backplate mat'l thickness of 2.5 mm (.10 in).
- Connector mounting pan head screws, MCU 2.0 mm (.08 in).
- Tolerance allowance - 3.2 mm (.13 in.) rack 2.0 mm (.08 in.)
Total - 12.2 (.50 in) (minimum).
7
Shells Fully
Mated
.522 (13.26)
.488 (12.40)
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
www.ittcannon.com
20
Similar pages