Fairchild DF02S2 Bridge rectifier Datasheet

DF005S2 - DF10S2
Bridge Rectifier
Features
Description
• Maximum Surge Rating: IFSM = 85 A
I2t = 30 A2Sec
• Optimized VF: Typical 0.93 V at 2 A, 25°C
• DF10S Socket Compatible
• Glass Passivated Junctions
• Space Saving
• Lead Free in Comply with
EU RoHS 2002/95/EU Directives
• Green Molding Compound: IEC61249 Halogen Free
• Qualified with IR Reflow and Wave Soldering
With the ever-pressing need to improve power supply
efficiency, improve surge rating, improve reliability, and
reduce size, the DFxS2 family sets a new standard in
performance.
The new design offers an improved surge rating of 85 A.
This is especially important when striving to improve reliability and increase efficiency. High efficiency designs
strive to reduce circuit resistance, which, unfortunately
can result in increased inrush surge. As such higher
surge current ratings can be required to maintain or
improve reliability.
The design also offers improved efficiency by achieving a
2 A VF of 1.1 V maximum at 25°C. This lower VF also
supports cooler and more efficient operation.
~
Finally, the DFxS2 achieves all this in a SDIP surface
mount form factor, reducing board space and volumetric
requirements vs. competitive devices.
+
IN
OUT
~
-
SDIP
Ordering Information
Part Number
Top Mark
Package
Packing Method
DF005S2
DF005S2
SDIP 4L
Tape and Reel
DF01S2
DF01S2
SDIP 4L
Tape and Reel
DF02S2
DF02S2
SDIP 4L
Tape and Reel
DF04S2
DF04S2
SDIP 4L
Tape and Reel
DF06S2
DF06S2
SDIP 4L
Tape and Reel
DF08S2
DF08S2
SDIP 4L
Tape and Reel
DF10S2
DF10S2
SDIP 4L
Tape and Reel
© 2014 Fairchild Semiconductor Corporation
DF005S2 - DF10S2 Rev. 1.0.1
www.fairchildsemi.com
DF005S2 - DF10S2 — Bridge Rectifier
October 2014
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Value
DF005S2 DF01S2 DF02S2 DF04S2 DF06S2 DF08S2 DF10S2
Unit
VRRM
Maximum Recurrent Peak
Reverse Voltage
50
100
200
400
600
800
1000
V
VRMS
Maximum RMS Bridge Input
Voltage
35
70
140
280
420
560
700
V
VDC
Maximum DC Blocking
Voltage
50
100
200
400
600
800
1000
V
IF(AV)
Maximum Average Forward
Current TA = 40°C
2.0
A
IFSM
Peak Forward Surge Current
8.3 ms Single Half-Sine
Wave Superimposed on
Rated Load(JEDEC Method)
85
A
TSTG
Storage Temperature Range
-55 to +150
°C
TJ
Operating Junction Temperature Range
-55 to +150
°C
Thermal Characteristics(1)
Symbol
RθJA
ψJL
Parameter
Conditions
Max.
Single-Die Measurement
(Maximum Land Pattern: 13 x 13 mm)
60
Multi-Die Measurement
(Maximum Land Pattern: 13 x 13 mm)
50
Multi-Die Measurement
(Minimum Land Pattern: 1.3 x 1.5 mm)
100
Thermal Characterization
Single-Die Measurement
Parameter, Junction to Lead (Maximum and Minimum Land Pattern)
25
Thermal Resistance,
Junction to Ambient
Unit
°C/W
°C/W
Note:
1. The thermal resistances (RθJA & ψJL) are characterized with the device mounted on the following FR4 printed circuit
boards, as shown in Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm.
Heating effect from adjacent dice is considered and only two dices are powered at the same time.
F
S
S
F
F
S
S
F
Figure 2. Minimum Pads of 2 oz Copper
Figure 1. Maximum Pads of 2 oz Copper
© 2014 Fairchild Semiconductor Corporation
DF005S2 - DF10S2 Rev. 1.0.1
www.fairchildsemi.com
2
DF005S2 - DF10S2 — Bridge Rectifier
Absolute Maximum Ratings
Values are at TA = 25°C unless otherwise noted.
Symbol
VF
Parameter
Conditions
Min.
Typ.
Forward Voltage Drop per Bridge Element IF = 2.0 A
IR
DC Reverse Current
at Rated DC Blocking Voltage
I2t
Rating for Fusing (t < 8.3 ms)
CJ
Junction Capacitance
© 2014 Fairchild Semiconductor Corporation
DF005S2 - DF10S2 Rev. 1.0.1
Max.
Unit
1.1
V
TJ = 25°C
3
TJ = 125°C
500
30
VR = 4.0 V,
f = 1.0 MHz
23
μA
A2S
pF
www.fairchildsemi.com
3
DF005S2 - DF10S2 — Bridge Rectifier
Electrical Characteristics
100
Reverse Current, IR[μA]
Forward Current, IF[A]
10
1
o
TJ=150 C
o
0.1
TJ=25 C
o
TJ=125 C
10
o
o
TJ=125 C
TJ=150 C
1
o
TJ=25 C
0.1
0.01
o
TJ= -55 C
0.01
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
o
TJ=-55 C
1.1
1E-3
200
1.2
400
Forward Voltage Drop, VF[V]
Figure 3. Typical Instantaneous Forward
Characteristics
1000
100
IFSM, Peak Forward Surge Current [A]
Average Current [DC]
800
Figure 4. Typical Reverse Characteristics
2.0
1.5
Max Pad (Sigle die)
1.0
0.5
0.0
40
600
Reverse Voltage, VR[V]
60
80
100
120
140
160
180
90
80
70
60
50
40
30
20
10
0
200
o
0
20
40
60
80
100
Number of Cycles at 60 Hz
Ambient Temperature [ C]
Figure 5. Maximum Average Current vs.
Ambient Temperature
Figure 6. Peak Forward Surge Current vs.
Number of Cycles at 60Hz
40
f = 1 MHz
Juntion Capacitance, CJ[pF]
35
30
25
20
15
10
5
0
0
10
20
30
40
50
Reverse Voltage, VR[V]
Figure 7. Typical Junction Capacitance
© 2014 Fairchild Semiconductor Corporation
DF005S2 - DF10S2 Rev. 1.0.1
www.fairchildsemi.com
4
DF005S2 - DF10S2 — Bridge Rectifier
Typical Performance Characteristics
DF005S2 - DF10S2 — Bridge Rectifier
Physical Dimensions
5.200
5.000
4
1.30
3
PIN1 ID
OPTIONAL
1.50
6.500
6.200
1
10.300
9.400
10.40
2
1.200
0.890
5.10
TOP VIEW
LAND PATTERN RECOMMENDATION
8.510
8.050
CHAMFER
OPTIONAL
7.874
7.370
2.60
2.20
0.330
0.220
1.530
1.020
1.12
SIDE VIEW
1.000
0.028
END VIEW
NOTES:
A. THIS PACKAGE DOES NOT CONFORM TO
ANY REFERENCE STANDARD.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
G. DRAWING FILE NAME: MKT-SDIP04AREV4.
Figure 8. 4-LEAD, SDIP, 6.5 MM WIDE
© 2014 Fairchild Semiconductor Corporation
DF005S2 - DF10S2 Rev. 1.0.1
www.fairchildsemi.com
5
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
MotionGrid®
MTi®
MTx®
MVN®
mWSaver®
OptoHiT¥
AccuPower¥
Awinda®
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
FPS¥
®*
®
®
PowerTrench
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
TinyBoost®
TinyBuck®
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
μSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
Xsens™
௝❺™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE
AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
2. A critical component in any component of a life support, device, or
intended for surgical implant into the body or (b) support or sustain
system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I71
© Fairchild Semiconductor Corporation
www.fairchildsemi.com
Similar pages