UTC MBR2045CL-TF1-T Schottky barrier rectifier diode Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR2045C
DIODE
SCHOTTKY BARRIER
RECTIFIER DIODES

FEATURES
* Guard Ring for Transient Protection
* Low Power Loss, High Efficiency
* High Surge Capability
* High Current Capability and Low Forward Voltage Drop

SYMBOL

ORDERING INFORMATION
Order Number
Lead Free
Halogen Free
MBR2045CL-TA3-T
MBR2045CG-TA3-T
MBR2045CL-TF3-T
MBR2045CG-TF3-T
MBR2045CL-TF1-T
MBR2045CG-TF1-T
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F
TO-220F1
Pin Assignment
1
2
3
A
K
A
A
K
A
A
K
A
Packing
Tube
Tube
Tube
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 1
QW-R601-021.D
MBR2045C

DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VR
45
V
Peak Repetitive Reverse Voltage
VRRM
45
V
Working Peak Reverse Voltage
VRWM
45
V
Maximum PMS Reverse Voltage
VR(RMS)
31.5
V
Average Rectified Forward Current
Per Leg
10
A
IO
(Rated VR) TC=125°C (Note 1)
20
A
Total
Peak Repetitive Forward Current
IFRM
10
A
(Rated VR, Square Wave, 20 kHz) (TC=125°C)
Non-Repetitive Peak Surge Current (Surge Applied At
IFSM
150
A
Rated Load Conditions Half Wave, Single Phase, 60Hz)
Voltage Rate of Change (Rated VR)
dv/dt
10000
V/µs
Typical Junction Capacitance (Note 3)
CJ
650
pF
Operating Junction Temperature (Note 3)
TJ
-65 ~ +150
°C
Storage Temperature
TSTG
-65 ~ +150
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ<1/θJA.
3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

THERMAL DATA
PARAMETER
SYMBOL
θJA
Junction to Ambient
TO-220/TO-220F
TO-220F1
Junction to Case

UNIT
°C/W
°C/W
THERMAL DATA
PARAMETER
SYMBOL
θJA
θJC
Junction to Ambient
Junction to Case

θJC
RATINGS
60
4.5
3.31
RATINGS
60
4.5
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (Note)
PARAMETER
SYMBOL
TEST CONDITIONS
IF=10A, TC=25°C
IF=10A, TC=125°C
Instantaneous Forward Voltage Drop
VFM
IF=20A, TC=25°C
IF=20A, TC=125°C
Rated DC Voltage, TC=25°C
Instantaneous Reverse Current
IRM
Rated DC Voltage, TC=125°C
Note: Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0 %.
UNISONIC TECHNOLOGIES CO., LTD
MIN TYP MAX UNIT
0.70
V
0.57
0.84
V
0.72
0.1
mA
15
2 of 2
www.unisonic.com.tw
QW-R601-021.D
MBR2045C

DIODE
TYPICAL CHARACTERISTICS
Typical Forward Characteristics
14
Instantaneous Forward Current, IF (A)
Average Rectified Current, ID (A)
Forward Derating Curve (Pre Diode)
12
10
8
6
4
2
0
0
25
50
75
100
125 150 175
Case Temperature, TC (°C)
100
IF Pulse
Width=300uS
25°C
10
1.0
0.1
0.2
0.4
0.6
0.8
1.0
Instantaneous Forward Voltage, VF (V)
Instantaneous Reverse Current, IR (A)
Typical Reverse Characteristics
1E-1
1E-2
1E-3
1E-4
1E-5
1E-6
1E-7
VR=45V
Pulse
Width=300uS
25
50
75
100
125
150
Case Temperature, TC (°C)
UTC assum es no responsibility for equipm ent failures that result from using products at v alues that
exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or
other param eters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or system s where
m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation
presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate
and reliable and m ay be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
3 of 3
www.unisonic.com.tw
QW-R601-021.D
Similar pages