Keysight M9048A General purpose switch module Datasheet

Keysight Technologies
General Purpose Switch Modules
M9130A, M9131A, M9132A, M9133A, M9135A
Data Sheet
Introduction
Product description
The PXI general purpose switch modules offer a variety of switch designs enabling you to select the best
configuration for your test application. Choose a switch optimized for high speed or high power, available
in either Form A (single-pole, single-throw) or Form C (single-pole, double-throw) configurations. The
individual modules range from 20 channels up to 100 channels. The general purpose switches manage
system controls by cycling power to your device under test (DUT), setting indicators and status lights, or
actuating external power relays and solenoids.
Installation and configuration is fast and easy with standard cable connections or an optional connector
block, soft front panels, and Keysight Connection Expert. In addition, software drivers support the most
common programming environments such as Visual Studio, C, C++, Visual Basic, MATLAB, and LabVIEW.
Applications
–– Aerospace and defense
–– Automotive
–– Electronic test
–– Medicalemiconductor
Features
–– Multiple configurations for fast and reliable high-density general purpose switching
–– Up to 100-channel general purpose armature relays
–– Power relay module
–– Software drivers support the most common programming environments
–– Optional connector blocks offer reliable measurements from robust, high-pincount interconnects
–– Easy programming and control with soft front panels and Keysight Command Expert
Uncompromising values
–– High-density general purpose switching in a compact PXI module
–– Get the performance you need to switch heavy loads with up to 300 W (DC resistive load)/1250 W
(AC resistive load)
–– Work in your programming environment of choice and reduce development time
–– Fast and easy module installation and configuration
–– Easier and faster PXI test system development
03 | Keysight | General Purpose Switch Modules - Data Sheet
Easy Setup, Test and Maintenance
Hardware platform
Software applications
Compliance
Keysight soft front panels provide easy-to-use instrument
communications. The PXI general purpose switch graphical user
interface guides developers through module setup so users
can quickly configure the switch states. Switch control is also
possible through the wide selection of instrument program
interfaces.
The general purpose switch modules are PXI compliant with a J1
connector and can be used in PXI chassis with cPCI (J1), PXI-1
(J1 only), or PXIe hybrid slot connectors.
The PXI format offers high performance in a small, rugged
package. It is an ideal deployment platform for many automated
test systems. In addition, a wide selection of complementary PXI
products are currently available, such as multimeters, waveform
generators, local oscillators, and digitizers.
Software platform
IO Libraries
Keysight IO Libraries Suite offers fast and easy instrument
connections and now extends to modular instruments. IO
Libraries Suite 16 (or greater) adds support for PXI, helping
you display all of the modules in your system, whether they are
PXI, PXIe, or AXIe, as well as view information about installed
software. In addition, the new version allows you to more easily
find the right driver and start module soft front panels directly
with Keysight Connection Expert.
Drivers
Keysight Technologies, Inc. provides instrument drivers that work
with your choice of software, saving time and preserving software
and hardware investments. Keysight modular instruments
come with IVI-COM, IVI-C, and LabVIEW software drivers that
work in the most popular test and measurement development
environments including LabVIEW, MATLAB, LabWindows/CVI,
Visual Studio C, C++, C#, VEE, and Visual Basic.
With a broad selection of drivers already included, any Keysight
PXI general purpose switch can be swapped out, replaced, or
upgraded with the latest version, requiring only minimal software
adjustments.
Easy software integration
In addition, application code examples are included for LabVIEW,
LabWindows/CVI, Visual Studio C, C++, C#, Visual Basic, and
MATLAB, providing switch setup and basic functionality. These
application code examples are easily modified to quickly integrate
the switch module into your measurement system.
Figure 1. General purpose switch soft front panel
04 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
Specification and characteristic summary
Following is a summary of specifications and characteristics for the Keysight PXI general
purpose switches. More detailed specifications and characteristics for each module are
featured later in this document.
General purpose switch specification and characteristic summary
General
Description Type#
Channels
Switch
purpose
slots
speed
switches
(typical)
M9130A
SPDT switch PXI 1-slot 26 Form C
2.7 msec
M9131A
SPDT switch PXI 1-slot 64 Form C
2 msec
M9132A
SPST switch PXI 1-slot 50 Form A
0.35 msec
M9133A
SPST switch PXI 1-slot 100 Form A 0.35 msec
M9135A
SPST switch PXI 1-slot 20 Form A
10 msec
1.
Not for connection to mains
Max voltage
(typical)
250 Vrms1
100 Vrms1
100 Vrms1
100 Vrms1
250 Vrms/
125 Vdc
Current
switch/
carry (typical)
2 A/2 A
0.25 A/1 A
1 A/1 A
1 A/1 A
5 A/5 A
Relay
type
Connectors
Armature
Reed
Reed
Reed
Armature
78 Dsub connector block or cable
200 LFH connector block or cable
200 LFH connector block or cable
200 LFH connector block or cable
20 MSM connector block or cable
05 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9130A PXI SPDT switch: 26-ch, armature relays
The M9130A provides 26 channels using single-pole, doublethrow (Form C) armature relays. This module design allows you
to switch voltages up to 250 Vrms and current up to 2 A. The
M9130A module is ideal for switching medium-power AC and
DC loads, or slave-switching larger relays or solenoids. Easily
connect to the front panel using a 78-pin, Dsub connector or
cable.
M9130A specifications and characteristics
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
Switch speed (typical)
Inital path resistance (typical)
Connectors
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH (typical)
Thermal offset (typical)
Relay life, operations
Low power load (typical)
Rated power load (typical)
Figure 3. 78-pin Dsub connector block
Figure 2. M9130A 26-ch, SPDT, armature relays
26
SPDT, Form C, armature
250 Vrms
2A/2A
60 W
2.7 msec
< 500 mΩ
78 Dsub
connector block or cable
5 MHz
1x1010 Ω
1x10 8 Ω
1x107 Ω
15 μV
> 2.5x10 6
> 1x105
06 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9131A PXI SPDT switch: 64-ch, reed relays
The M9131A provides 64 channels using single-pole, doublethrow
(Form C), high-speed, long-life reed relays. The module is
designed for switching applications with signals up to 100 Vrms
and 1 A, with up to 3 W power. Easily connect to the module
through a high-density, 200-pin low force helix (LFH) connector
or cable.
M9131A specifications and characteristics
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
Switch speed (typical)
Inital path resistance (typical)
Connectors
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH typical)
Thermal offset (typical)
Relay life, operations1
Low power load (typical)
Rated power load (typical)
1.
Relay life is defined as path resistance <1.1 Ω
Figure 5. 200 pin LFH connector block
Figure 4. M9131A 64-ch, SPDT, reed relays
64
SPDT, Form C, reed
100 Vrms
0.25 A/1.0 A
3W
2.7 msec
400 mΩ
200 LFHconnector block
or cable
10 MHz
1x1010 Ω
1x10 8 Ω
1x10 6 Ω
50 μV
1x109
>1x10 6
07 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9132A PXI SPST switch: 50-ch, reed relays
The M9132A switch module is a general purpose, 50- channel,
single-pole, single-throw (Form A) switch array. The module is
designed with high-speed reed relays that enable switching for
signals up to 100 Vrms and 1 A to 25 W power. The switches are
ideal for powering your product on/off under test, or to actuate
power relays and solenoids. Easily connect to the module through
a high-density, 200-pin, low force helix (LFH) connector or cable.
M9132A specifications and characteristics
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
Switch speed (typical)
Inital path resistance (typical)
Connectors
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH typical)
Thermal offset (typical)
Relay life, operations1
Low power load (typical)
Rated power load (typical)
1.
Figure 6. M9132A 50-ch, SPST, reed relays.
Relay life is defined as path resistance <1.3 Ω
50
SPDT, Form A, reed
100 Vrms
1 A/1 A
25 W
.35 msec
<500 mΩ
200 LFHconnector block
or cable
5 MHz
1x1010 Ω
1x10 8 Ω
1x10 6 Ω
50 μV
1x109
>1x10 6
08 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9133A PXI SPST switch: 100-ch, reed relays
For test environments that require many switches, such as
manufacturing or R&D testing, the M9133A provides 100
channels of single-pole, single-throw (Form A), high-speed
reed relays. Each channel has the ability to manage switching
of 100 Vrms and 1 A, with up to 20 W power. Easily connect
to the module through a high-density, 200-pin low force helix
(LFH) connector or cable.
M9133A specifications and characteristics
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
Switch speed (typical)
Inital path resistance (typical)
Connectors
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH typical)
Thermal offset (typical)
Relay life, operations1
Low power load (typical)
Rated power load (typical)
1.
Figure 7. M9133A 100-ch, SPST, reed relays
Relay life is defined as path resistance <1.4 Ω
100
SPDT, Form A, reed
100 Vrms
1 A/1 A
25 W
.35 msec
<500 mΩ
200 LFHconnector block
or cable
5 MHz
1x1010 Ω
1x10 8 Ω
1x10 6 Ω
50 μV
1x109
>1x10 6
09 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
M9135A PXI 20-ch SPST switch
For your high power switching needs, the M9135A module
provides 20 channels of single-pole, single-throw (Form A)
relays suitable for switching inductive or capacitive loads. The
module design consists of heavy-duty armature relays rated
for resistive loads up to 300 W DC or 1250 W AC. Applications
benefiting from this module include switching of heavy AC
or DC loads, power supplies, and large system relays and
solenoids. Connect to the front panel using the 20-pin MS-M
connector or cable.
M9135A specifications and characteristics
General specifications
Channels
Switch type
Max volts
Max current switch/carry
Switching characteristics (nominal)
Max power
Switch speed (typical)
Inital path resistance (typical)
Connectors
Bandwidth
DC isolation, Ch-Ch, Ch-Gnd
25C / 40%RH (typical)
25C / 80%RH (typical)
40C / 80%RH typical)
Thermal offset (typical)
Relay life, operations1
Low power load (typical)
Rated power load (typical)
1.
Figure 8. M9135A 20-ch, SPST, 10A, 300W
Relay life is defined as path resistance <0.2 Ω
20
SPDT, Form A, reed
250 Vrms/125 Vdc
5 A/5 A
300 W
10 msec
35 mΩ
20 MSMconnector block
or cable
>20 MHz
1x1010 Ω
1x10 8 Ω
1x10 6 Ω
50 μV
1x109
>1x10 6
10 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
General specifications
Slot type
Connector type
PXI 1-slot
M9130A
M9131A
78 D connector block 200 LFH connector block
or cable
or cable
Environmental characteristics1, 2
Temperature
Relative humidity
EMC
Safety
Altitude under relative humidity
Warm-up time
M9132A
200 LFH connector block
or cable
M9133A
200 LFH connector block
or cable
M9135A
20 MSM connector
block or cable
Operating: 0 °C to 55 °C
Non-operating: -40 °C to +70 °C
Relative humidity: Up to 95% R.H. at 40 ˚C, non-condensing, pollution degree 1
European EMC Directive 2004/108/EC
- IEC/EN 61326-1
- CISPR Pub 11 Group 1, Class A
- AS/NZS CISPR 11
- ICES/NMB-001
Canadian ISM device ICS-001
European Low Voltage Directive 2006/95/EC
- ETL, UL/IEC/EN 61010-1, 2nd Edition
Altitude: up to 4.6 km (15,000 ft)
15 minutes, max
1.
Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the
environmental stresses of storage, transportation, and end-use; those stresses include, but are not limited to temperature, humidity, shock, vibration,
altitude, and power line conditions.
2. Test methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F class 3.
Physical characteristics
Dimensions
–– 3U/1-slot PXI/CompactPCI standard
–– Connector slot compatibility: cPCI (J1), PXI 1, PXIe hybrid slot
–– Front panel complies with IEEE1101.10 certification and compliance
Weight
M9130A
M9131A
M9132A
190 g
230 g
300 g
(.42 lbs)
(.51 lbs)
(.66 lbs)
M9133A
240 g
(.53 lbs)
M9135A
300 g
(.66 lbs)
Table 9
Power requirements
+3.3 V
+5 V
+12 V
M9130A
0
500 mA
(400 ma typ)
0
M9131A
0
1A
M9132A
0
500 mA
M9133A
0
500 mA
M9135A
0
200 mA
0
0
0
15 mA per relay
11 | Keysight | General Purpose Switch Modules - Data Sheet
Specifications and Characteristics
System requirements
Topic
Operating systems
Processor speed
Available memory
Available disk space1
Video
Browser
Windows 7 and Vista Requirements
Windows 7 (32-bit and 64-bit)
Windows Vista, SP1 and SP2 (32-bit and 64-bit)
1 GHz 32-bit (x86), 1 GHz 64-bit (x64)
(no support for Itanium 64)
4 GB minimum
8 GB or greater recommended
1.5 GB available hard disk space, includes:
–– 1 GB available for Microsoft .NET Framework 3.5 SP12
–– 100 MB for Keysight IO Libraries Suite
Support for DirectX 9 graphics with 128 MB graphics
memory recommended
(Super VGA graphics is supported)
Microsoft Internet Explorer 7.0 or greater
Windows XP Requirements
Windows XP, Service Pack 3
600 MHz or higher required
800 MHz recommended
3 GB minimum
1.5 GB available hard disk space, includes:
–– 1 GB available for Microsoft .NET Framework 3.5 SP12
–– 100 MB for Keysight IO Libraries Suite
Super VGA (800 x 600) 256 colors or more
Microsoft Internet Explorer 6.0 or greater
1. Because of the installation procedure, less memory may required for operation than is required for installation.
2. NET Framework Runtime Components are installed by default with Windows Vista and Windows 7. Therefore, you may not need this amount of available
disk space.
12 | Keysight | General Purpose Switch Modules - Data Sheet
Setup and Calibration Services
Assistance
One day startup assistance
Calibration and Traceability
Factory Calibration
Calibration Cycle
Calibration Sites
R1282A Annual Calibration
Service
A Keysight Technologies applications engineer will help you get started and
install the modules in a chassis, configure the controller, load software and
make first measurements.
Included in base
configuration
Keysight’s modular products M9130A, M9131A, M9132A, M9133A, M9135A
are factory calibrated and shipped with an ISO-9002, NIST-traceable
calibration certificate.
A one year calibration cycle is recommended.
–– At Keysight Worldwide Service Centers
–– On-site by Keysight
–– By self-maintainers
–– Keysight Calibration
–– Keysight Calibration + Uncertainties
–– Keysight Calibration + Uncertainties + Guardbanding
–– Standards Compliance
–– ANSI Z540.3-2006, ISO 17025:2005, ANSI Z540-1-1994, ISO
9001:2008
Included in base
configuration
More information on
www.keysight.com/find/infoline
Additional service, not
included in the warranty
13 | Keysight | General Purpose Switch Modules - Data Sheet
Configurations and Ordering
Hardware
Model
Each switch
includes:
M9130A
M9131A
M9132A
M9133A
M9135A
Related products
Description
Getting started guide, software drivers, and
Keysight I/O libraries
PXI general purpose SPDT switch:
26-ch, 2 A, armature relays
PXI general purpose SPDT switch: 64-ch, 100
Vrms/1A, reed relays
PXI general purpose SPST switch: 50-ch, 100
Vrms/1A, reed relays
PXI general purpose SPST switch: 100-ch, 100
Vrms/1A, reed relays
PXI SPST switch: 20-ch, 5A, 300 W
Accessories
M9130A
Y1181A
Description
PXI connector block: 78-pin, shielded, female DSub
Y1187A
PXI connector cable: 78-pin, male-to-female, 1
meter
PXI connector cable: 78-pin, male-to-female, 2
meter
Description
PXI connector block: 200-pin, shielded, male
Y1188A
M9131A, 32A, 33A
Y1182A
Y1189A
Y1190A
M9135A
Y1191A
Y1192A
Y1193A
PXI connector cable: 200-pin, LFH male to four 50
pin Dtype female connectors, 1 meter
PXI connector cable: 200-pin, LFH male to four 50
pin Dtype female connectors, 2 meter
Description
PXI power cable: 20-pin, female-to-unterminated,
1 meter
PXI power cable: 20-pin, female-to-unterminated,
2 meter
PXI power connector: 20-pin, female (universal),
solder pin
Note: Although not required, the Positronic Industries 9099-0-0
Terminal Insertion Tool and the 9081-0-0 Terminal Removal Tool
are recommended.
Model
M9018A
Description
18-slot PXIe chassis: 18-slot, 3U, 8GB/s
M9021A
PCIe® cable interface: Gen 2, x8
M9045B
PCIe ExpressCard adaptor: Gen 1
Y1200B
PCIe cable: x4 to x8, 2.0m (used with M9045B)
M9048A
PCIe desktop PC adapter: Gen 2, x8
Y1202A
PCIe cable: x8, 2.0m (used with M9048A)
Software
Model
Description
Supported operating Microsoft Windows XP (32-bit),
systems
Microsoft Windows Vista (32/64-bit)
Microsoft Windows 7 (32/64-bit)
Standard compliant IVI-COM, IVI-C, LabVIEW
drivers
Supported applica- VisualStudio (VB.NET, C#, C/C++), LabVIEW,
tion development
LabWindows/CVI, MATLAB
environments (ADE)
Keysight IO Libraries Includes: VISA Libraries, Keysight Connection
Expert, IO Monitor
Recommended chassis configuration
For the ultimate in speed and flexibility, combine your switches
with other PXI modules in the Keysight M9018A PXIe chassis as
follows:
–– Select a PXIe system module, PCIe cable interface,
or embedded controller (the Keysight M9021A is
recommended)
–– If an external computer is being used, select an appropriate
PC interface card (the Keysight M9047A is recommended
with an external PC)
–– Select an appropriate cable to connect the computer
interface board to the system module (the Y1202A is
recommended to connect the M9047A and M9021A)
–– Select rack mount and EMC filler panel kits as required
14 | Keysight | General Purpose Switch Modules - Data Sheet
Definitions for specifications
Specifications describe the warranted performance of calibrated
instruments that have been stored for a minimum of 2 hours
within the operating temperature range of 0 to 55 °C, unless
otherwise stated, and after a 45 minute warm-up period. Data
represented in this document are specifications unless other wise
noted.
Characteristics describe product performance that is useful in
the application of the product, but that is not covered by the
product warranty. Characteristics are often referred to as Typical
or Nominal values.
–– Typical describes characteristic performance, which 80% of
the instruments will meet when operated over a 20 to 30 °C
temperature range. Typical performance is not warranted.
–– Nominal describes representative performance that is useful
in the application of the product when operated over a
20 to 30 °C temperature range. Nominal performance is not
warranted.
Note: All graphs contain measured data from several units at
room temperature unless otherwise noted.
Warranty and Calibration
Advantage Services: Calibration and Warranty
Keysight Advantage Services is committed to your success throughout
your equipment’s lifetime.
Warranty
Included
3-year warranty (return to Keysight), standard1
R-51B-001-5Z
5-year return to Keysight warranty assurance plan
1.
Excludes relay wear-out.
15 | Keysight | General Purpose Switch Modules - Data Sheet
Evolving
Our unique combination of hardware, software, support, and people can help you reach
your next breakthrough. We are unlocking the future of technology.
From Hewlett-Packard to Agilent to Keysight
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s committed to superior product quality and lower total cost
of ownership. Keysight is the only test and measurement company with
three-year warranty standard on all instruments, worldwide. And, we provide
a one-year warranty on many accessories, calibration devices, systems and
custom products.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to ten years of protection and no budgetary surprises to ensure your
instruments are operating to specification, so you can rely on accurate
measurements.
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
PXI is a registered trademark of the PXI Systems Alliance. Visual Studio,
Visual C, C++, and Visual Basic are registered trademarks of Microsoft
Corporation. Windows and MS Windows are U.S. registered trademarks
of Microsoft Corporation. PCIe is a registered trademark of PCI-SIG.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 11 2626
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-11-29-16)
DEKRA Certified
ISO9001 Quality Management System
www.keysight.com/find/modular
www.keysight.com/find/pxi-switch
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
Quality Management System
This information is subject to change without notice.
© Keysight Technologies, 2013 - 2017
Published in USA, January 31, 2017
5990-7183EN
www.keysight.com
Similar pages