TI1 CDCLVD110VFRG4 Programmable low-voltage 1:10 lvds clock driver Datasheet

CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
Not Recommended for New Designs
PROGRAMMABLE LOW-VOLTAGE 1:10 LVDS CLOCK DRIVER
FEATURES
1
•
•
•
•
•
•
•
•
•
LQFP PACKAGE
Low-Output Skew <30 ps (Typical) for
Clock-Distribution Applications
Distributes One Differential Clock Input to
10 LVDS Differential Clock Outputs
VCC range 2.5 V ±5%
Typical Signaling Rate Capability of Up to
1.1 GHz
Configurable Register (SI/CK) Individually
Enables Disables Outputs, Selectable CLK0,
CLK0 or CLK1, CLK1 Inputs
Full Rail-to-Rail Common-Mode Input Range
Receiver Input Threshold ±100 mV
Available in 32-Pin LQFP Package
Fail-Safe I/O-Pins for VDD = 0 V (Power Down)
DESCRIPTION
The CDCLVD110 clock driver distributes one pair of differential LVDS clock inputs (either CLK0 or CLK1) to 10
pairs of differential clock outputs (Q0, Q9) with minimum skew for clock distribution. The CDCLVD110 is
specifically designed for driving 50-Ω transmission lines.
When the control enable is high (EN = 1), the 10 differential outputs are programmable in that each output can
be individually enabled/disabled (3-stated) according to the first 10 bits loaded into the shift register. Once the
shift register is loaded, the last bit selects either CLK0 or CLK1 as the clock input. However, when EN = 0, the
outputs are not programmable and all outputs are enabled.
The CDCLVD110 is characterized for operation from –40°C to 85°C.
Not Recommended for New Designs. Use CDCLVD110A as a Replacement.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2008, Texas Instruments Incorporated
CDCLVD110
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
www.ti.com
FUNCTIONAL BLOCK DIAGRAM
2
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
TERMINAL FUNCTIONS
TERMINAL
NAME
NO.
I/O
DESCRIPTION
CK
1
I
Control register input clock, features a 120-kΩ pullup resistor
SI
2
I
Control register serial input/CLK Select, features a 120-kΩ pulldown resistor
CLK0
3
I
True differential input, LVDS
CLK0
4
I
Complementary differential input, LVDS
VBB
5
O
Reference voltage output
CLK1
6
I
True differential input, LVDS
CLK1
7
I
Complementary differential input, LVDS
EN
8
I
Control enable (for programmability), features a 120-kΩ pulldown resistor, input
VSS
9, 25
Device ground
16, 32
Supply voltage
VDD
Q [9:0]
11, 13, 15, 18, 20, 22,
24, 27, 29, 31
O
Clock outputs, these outputs provide low-skew copies of CLKIN
Q[9:0]
10, 12, 14, 17, 19,
21,23, 26, 28, 30
O
Complementary clock outputs, these outputs provide low-skew copies of CLKIN
ABSOLUTE MAXIMUM RATINGS (1)
VALUE
UNIT
–0.3 to 2.8
V
Input voltage
–0.2 to (VDD + 0.2)
V
VI Output voltage
–0.2 to (VDD + 0.2)
V
VDD
Supply voltage
VI
VO
Qn, Qn, IOSD
Driver short circuit current
Continuous
Electrostatic discharge (HBM 1.5 kΩ, 100 pF), ESD
(1)
>2000
V
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING CONDITIONS
VDD
Supply voltage
VIC
Receiver common-mode input voltage
TA
Operating free-air temperature
MIN
NOM
MAX
UNIT
2.375
2.5
2.625
V
0.5|VID|
VDD – 0.5|VID|
V
–40
85
°C
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP MAX
UNIT
RL = 100Ω
250
450
600
mV
50
mV
–40°C to 85°C
0.95
1.2
1.45
V
350
mV
DRIVER
|VOD|
Differential output voltage
ΔVOD
VOD magnitude change
VOS
Offset voltage
ΔVOS
VOS magnitude change
IOS
Output short circuit current
VBB
Reference output voltage
VDD = 2.5 V, IBB = –100 µA
CO
Output capacitance
VO = VDD or GND
VO = 0 V
–20
|VOD| = 0 V
20
1.15
1.25
1.35
3
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
mA
V
pF
3
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
ELECTRICAL CHARACTERISTICS (continued)
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
TYP MAX
UNIT
RECEIVER
VIDH
Input threshold high
VIDL
Input threshold low
|VID|
Input differential voltage
IIH
Input current, CLK0/CLK0, CLK1/CLK1
IIL
CI
Input capacitance
100
mV
–100
mV
200
mV
VI = VDD
–5
VI = 0 V
µA
5
VI = VDD or GND
3
pF
SUPPLY CURRENT
IDD
Supply current
IDDZ
Full loaded
All outputs enabled and loaded, RL = 100 Ω, f = 0 Hz
No load
Outputs enabled, no output load, f = 0 Hz
35
3-State
All outputs 3-state by control logic, f = 0 Hz
35
130
mA
JITTER CHARACTERISTICS
characterized with CDCLVD110 performance EVM, VDD = 3.3 V, OUTPUTS NOT UNDER TEST are terminated to 50Ω
PARAMETER
tjitterLVDS
Additive phase jitter from input to
LVDS output Q3 and Q3
TEST CONDITIONS
MIN
TYP
12 kHz to 5 MHz, fout = 30.72 MHz
650
12 kHz to 20 MHz, fout = 125 MHz
299
MAX
UNIT
fs rms
LVDS — SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VDD = 2.5 V ±5%
FROM
(INPUT)
TO
(OUTPUT)
CLK0, CLK0
CLK1, CLK1
PARAMETER
tPLH
tPHL
Propagation delay low-to-high
Propagation delay high-to-low
MIN
TYP
MAX
Qn, Qn
2
3
ns
CLK0, CLK0
CLK1, CLK1
Qn, Qn
2
3
ns
CLK0, CLK0
CLK1, CLK1
Qn, Qn
tduty
Duty cycle
tsk(o)
Output skew
Any Qn, Qn
tsk(p)
Pulse skew
Any Qn, Qn
50
ps
Any Qn, Qn
600
ps
Any Qn, Qn
350
ps
Any Qn, Qn
350
ps
tsk(pp) Part-to-part skew
tr
Output rise time, 20% to 80%, RL = 100 Ω, CL = 5 pF
tf
Output fall time, 20% to 80%, RL = 100 Ω, CL = 5 pF
fclk
CLK0, CLK0
CLK1, CLK1
Max input frequency
Any Qn, Qn
45%
UNIT
55%
30
900
ps
1100
MHz
CONTROL REGISTER CHARACTERISTICS
over recommended operating free-air temperature range, VDD = 2.5 V ±5% (unless otherwise noted)
PARAMETER
TEST CONDITIONS
fMAX
Maximum frequency of shift register
tsu
Setup time, clock to SI
th
tremoval
tw
Clock pulse width, minimum
VIH
Logic input high
VDD = 2.5 V
VIL
Logic input low
VDD = 2.5 V
4
MIN
TYP
100
150
MAX
UNIT
MHz
2
ns
Hold time, clock to SI
1.5
ns
Removal time, enable to clock
1.5
ns
Submit Documentation Feedback
3
ns
2
V
0.8
V
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
CONTROL REGISTER CHARACTERISTICS (continued)
over recommended operating free-air temperature range, VDD = 2.5 V ±5% (unless otherwise noted)
PARAMETER
TEST CONDITIONS
Input current, CK pin
IIH
Input current, CK pin
VI = GND
Input current, SI and EN pins
TYP
MAX
–5
5
10
–30
–10
30
–5
5
VI = VDD
Input current, SI and EN pins
IIL
MIN
UNIT
µA
µA
SPECIFICATION OF CONTROL REGISTER
The CDCLVD110 is provided with an 11-bit, serial-in shift register and an 11-bit control register. The control
Register enables/disables each output clock and selects either CLK0 or CLK1 as the input clock. The
CDCLVD110 has two modes of operation:
Programmable Mode (EN=1)
The shift register utilizes a serial input (SI) and a clock input (CK). Once the shift register is loaded with 11
clock pulses, the twelfth clock pulse loads the control register. The first bit (bit 0) on SI enables the Q9, Q9
output pair, and the tenth bit (bit 9) enables the Q0, Q0 pair. The eleventh bit (bit 10) on SI selects either
CLK0 or CLK1 as the input clock; a bit value of 0 selects CLK0, whereas a bit value of 1 selects CLK1. To
restart the control register configuration, a reset of the state machine must be done with a clock pulse on CK
(shift register clock input) and EN set to low. The control register can be configured only once after each
reset.
Standard Mode (EN=0)
In this mode, the CDCLVD110 is not programmable and all the clock outputs are enabled. The clock input
(CLK0 or CLK1) is selected with the SI pin, as is shown in the table entitled control register.
STATE-MACHINE INPUTS
EN
SI
CK
OUTPUT
L
L
X
All outputs enabled, CLK0 selected, control register disabled, default state
L
H
X
All outputs enabled, CLK1 selected, control register disabled
H
L
↑
First stage stores L, other stage stores data of previous stage
H
H
First stage stores H, other stage stores data of previous stage
L
X
Reset of state machine, shift and control registers
CONTROL REGISTER
BIT 10
BITS [0-9]
QN[0-9]
L
H
CLK0
H
H
CLK1
X
L
Outputs disabled
SERIAL INPUT (SI) SEQUENCE
BIT 10
BIT 9
BIT 8
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
CLK_SEL
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
TRUTH TABLE FOR CONTROL LOGIC
CK
EN
SI
CLK0
CLK0
CLK1
CLK1
L
L
L
L
L
L
L
H
X
L
H
L
X
L
L
Open
Open
L
L
H
X
L
L
H
X
L
L
H
X
All outputs enabled
Q(0-9)
Q(0-9)
X
L
H
X
H
L
X
X
L
H
X
L
H
L
H
X
H
L
H
L
X
Open
Open
L
H
X = Don't care
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
5
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
APPLICATION INFORMATION
Fall-Safe Information
For VDD = 0 V (power-down mode) the CDCLVD110 has fail-safe input and output pins. In power-on mode,
fail-safe biasing at input pins can be accomplished with a 10-kΩ pullup resistor from CLK0/CLK1 to VDD and a
10-kΩ pulldown resistor from CLK0/CLK1 to GND.
LVDS Receiver Input Termination
The LVDS receiver inputs need to have 100-Ω termination resistors placed as close as possible across the input
pins.
Control Inputs Termination
No external termination is required. The CK control input has an internal 120-k. pullup resistor while SI- and
EN-control inputs each have an internal 120-kΩ pulldown resistor. If the control pins are left open per the default,
all outputs are enabled, CLK0, CLK0 is selected, and the control register is disabled.
6
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
PARAMETER MEASUREMENT INFORMATION
A.
Output skew, tsk(o), is calculated as the greater of:
– The difference between the fastest and the slowest tPLHn (n = 1, 2,...10)
– The difference between the fastest and the slowest tPHLn (n = 1, 2,...10)
B.
Part-to-part skew, tsk(pp), is calculated as the greater of:
– The difference between the fastest and the slowest tPLHn (n = 1, 2,...10) across multiple devices
– The difference between the fastest and the slowest tPHLn (n = 1, 2,...10) across multiple devices
C.
Pulse skew, tsk(p), is calculated as the magnitude of the absolute time difference between the high-to-low (tPHL) and
the low-to-high (tPLH) propagation delays when a single switching input causes one or more outputs to switch,
tsk(p) = | tPHL – tPLH |. Pulse skew is sometimes referred to as pulse width distortion or duty cycle skew.
Figure 1. Waveforms for Calculation of tsk(o) and tsk(pp)
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
7
CDCLVD110
www.ti.com
SCAS684C – SEPTEMBER 2002 – REVISED JANUARY 2008
PARAMETER MEASUREMENT INFORMATION (continued)
Figure 2. Test Criteria for fclk, Duty Cycle, tr, tf, VOD
8
Submit Documentation Feedback
Copyright © 2002–2008, Texas Instruments Incorporated
Product Folder Link(s) :CDCLVD110
PACKAGE OPTION ADDENDUM
www.ti.com
4-Aug-2009
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
CDCLVD110VF
NRND
LQFP
VF
32
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CDCLVD110VFG4
NRND
LQFP
VF
32
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CDCLVD110VFR
NRND
LQFP
VF
32
1000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
CDCLVD110VFRG4
NRND
LQFP
VF
32
1000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Mar-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CDCLVD110VFR
Package Package Pins
Type Drawing
LQFP
VF
32
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
1000
330.0
16.4
Pack Materials-Page 1
9.6
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
9.6
1.9
12.0
16.0
Q2
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Mar-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CDCLVD110VFR
LQFP
VF
32
1000
341.0
159.0
123.5
Pack Materials-Page 2
MECHANICAL DATA
MTQF002B – JANUARY 1995 – REVISED MAY 2000
VF (S-PQFP-G32)
PLASTIC QUAD FLATPACK
0,45
0,25
0,80
24
0,20 M
17
25
16
32
9
0,13 NOM
1
8
5,60 TYP
7,20
SQ
6,80
9,20
SQ
8,80
Gage Plane
0,05 MIN
0,25
0°– 7°
1,45
1,35
Seating Plane
0,75
0,45
0,10
1,60 MAX
4040172/D 04/00
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Mobile Processors
www.ti.com/omap
Wireless Connectivity
www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated