Lumileds DS203-L High efficacy in a 3535 package with full range of ccts and cri Datasheet

ILLUMINATION
LUXEON 3535L Line
High efficacy in a 3535 package with full
range of CCTs and CRIs
The LUXEON 3535L Line delivers optimized performance in combination
with the Quality of Light needed for distributed light source applications.
In addition to offering specified correlated color temperature and
color rendering combinations, LUXEON 3535L Line is available in three
performance levels. These LEDs boast the efficacy and reliability required
by the indoor and outdoor illumination markets.
FEATURES AND BENEFITS
PRIMARY APPLICATIONS
Supports ENERGY STAR lumen maintenance certification requirements
Architectural
Maximum drive current of 200mA delivers superior lumens for reduced
LED count
Downlights
1/7th ANSI color binning delivers tight color control
High Bay & Low Bay
Enables Ts points of 105°C which allows for higher board temperature
Indoor Area Lighting
Full range of CCTs and CRI configurations for design flexibility
Lamps
UL-recognized component [E352519]
Specialty Lighting
Spotlights
DS203-L LUXEON 3535L (Legacy) Product Datasheet ©2016 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Efficacy Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3535L Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, Tj, of 25°C.
Part Number Nomenclature
Part numbers for LUXEON 3535L Line follow the convention below:
M X A B - P W C C - D E E E
Where:
B
–
designates minimum CRI (7=70CRI, 8=80CRI and 9=85CRI or 90CRI)
C C
–
designates nominal ANSI CCT (30=3000K and 40=4000K)
D
–
designates product family in standard parts (0 or 9=LUXEON 3535L, S=LUXEON 3535LS)
E E E –
designates options for detailed product specification
Therefore, the following part number is used for a LUXEON 3535L 3000K 80CRI:
M X A 8 - P W 3 0 - 0 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L Line
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 3535L Line at 100mA and 65mA, Tj=25ºC.
TYPICAL
LUMINOUS
EFFICACY (lm/W)
TYPICAL
LUMINOUS
FLUX (lm)
44
147
30
158
MXA7-PW40-S001
38
44
147
30
158
MXA7-PW50-S001
70
38
44
147
30
158
MXA7-PW57-S001
70
38
46
154
31
166
MXA7-PW65-S001
2200K
80
26
30
100
20
108
MXA8-PW22-S001
2500K
80
26
32
107
22
116
MXA8-PW25-S001
2700K
80
30
38
127
26
137
MXA8-PW27-S001
3000K
80
30
39
130
26
141
MXA8-PW30-S001
3500K
80
30
41
137
28
148
MXA8-PW35-S001
4000K
80
34
43
144
29
155
MXA8-PW40-S001
5000K
80
34
43
144
29
155
MXA8-PW50-S001
5700K
80
30
42
140
28
151
MXA8-PW57-S001
6500K
80
30
42
140
28
151
MXA8-PW65-S001
2700K
85
30
33
110
22
119
MXA9-PW27-S111
4000K
85
24
32
107
22
116
MXA9-PW40-S111
2700K
90
26
32
107
22
116
MXA9-PW27-S001
3000K
90
26
32
107
22
116
MXA9-PW30-S001
4000K
70
40
49
161
33
176
MXA7-PW40-0000
5000K
70
40
49
161
33
176
MXA7-PW50-0000
5700K
70
40
49
161
33
176
MXA7-PW57-0000
6500K
70
40
47
155
32
168
MXA7-PW65-0000
2200K
80
28
33
109
22
117
MXA8-PW22-0000
2500K
80
28
34
112
23
121
MXA8-PW25-0000
2700K
80
36
44
145
30
156
MXA8-PW27-0000
3000K
80
34
44
145
30
156
MXA8-PW30-0000
3500K
80
34
44
145
30
156
MXA8-PW35-0000
4000K
80
36
46
151
31
163
MXA8-PW40-0000
5000K
80
36
47
155
32
167
MXA8-PW50-0000
5700K
80
36
45
148
30
160
MXA8-PW57-0000
6500K
80
36
45
148
30
160
MXA8-PW65-0000
2700K
85
32
36
119
24
128
MXA9-PW27-0000
4000K
85
34
40
132
27
142
MXA9-PW40-0000
2700K
90
31
36
119
24
128
MXA9-PW27-9000
3000K
90
31
36
119
24
128
MXA9-PW30-0000
LUMINOUS FLUX [3] (lm)
NOMINAL MINIMUM
PRODUCT
CCT [1]
CRI [2]
MINIMUM
4000K
70
38
5000K
70
5700K
6500K
TYPICAL
100mA
LUXEON
3535LS
LUXEON
3535L
TYPICAL
LUMINOUS
EFFICACY (lm/W)
PART NUMBER
65mA
Notes for Table 1:
1. Correlated color temperature is based upton mounted die on highly reflective surface at Tj=25°C.
2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed.
3. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
3
Optical Characteristics
Table 2. Optical characteristics for LUXEON 3535L Line at 100mA, Tj=25ºC.
PART NUMBER
TYPICAL TOTAL INCLUDED ANGLE [1]
TYPICAL VIEWING ANGLE [2]
MXAx-xxxx-xxxx
140°
115°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 3535L Line at 100mA, Tj=25ºC.
FORWARD VOLTAGE [1] (Vf)
MINIMUM
TYPICAL
MAXIMUM
TYPICAL TEMPERATURE
COEFFICIENT OF FORWARD
VOLTAGE (mV/°C) [2]
MXAx-PWxx-S001
2.8
3.0
3.4
-2.0 to -4.0
22
MXAx-PWxx-0000
2.8
3.0
3.4
-2.0 to -4.0
18
PART NUMBER
TYPICAL THERMAL
RESISTANCE — JUNCTION
TO SOLDER PAD (°C/W)
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 110°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 3535L Line.
PARAMETER
MAXIMUM PERFORMANCE
DC Forward Current [1,2]
Peak Pulsed Forward Current
LED Junction Temperature
[1]
200mA
[1,3]
(DC & Pulse)
240mA
125°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 2
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 105°C
Soldering Temperature
JEDEC 020D 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse) [4,5]
-5V
Notes for Table 4:
1. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
2. At 10% duty cycle with pulse width of 10ms.
3. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
4. LUXEON 3535L LEDs are not designed to be driven in reverse bias.
5. At maximum reverse current of 10µA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for LUXEON 3535L 70CRI White at 100mA, Tj=25ºC.
Figure 1b. Typical normalized power vs. wavelength for LUXEON 3535L 80CRI White at 100mA, Tj=25ºC.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
5
Figure 1c. Typical normalized power vs. wavelength for LUXEON 3535L 90CRI White at 100mA, Tj=25ºC.
Light Output Characteristics
Figure 2. Typical normalized light output vs. junction temperature for MXAx-PWxx, Tj=25ºC.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
6
Figure 3. Typical normalized light output vs. forward current for MXAx-PWxx, Tj=25ºC.
Forward Current Characteristics
Figure 4. Typical forward current vs. forward voltage for MXAx-PWxx, Tj=25ºC.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
7
Radiation Pattern Characteristics
Figure 5. Typical radiation pattern for LUXEON 3535L at 100mA, Tj=25ºC.
Figure 6. Typical polar radiation pattern for LUXEON 3535L at 100mA, Tj=25ºC.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
8
Efficacy Characteristics
Figure 7. Typical normalized efficacy vs. forward current for MXAx-PWxx at 100mA, Tj=25ºC.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
9
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 3535L Line LEDs are labeled using a 4 or 5-digit alphanumeric CAT code following the format below:
Where:
A B C D or A x B C D
A
–
designates luminous flux bin (example: M=36 to 40 lumens, R=48 to 52 lumens)
x
–
designates internal Lumileds code
B C –
designates color bin (example: 7Z, 71, 72, 73, 74, 75, 76) for 3000K parts
D
designates forward voltage bin (example: S=2.70 to 2.80V, T=2.80 to 2.90V)
–
Therefore, a LUXEON 3535L with a lumen range of 48 to 52, color bin of 7Z and a forward voltage range of 2.70 to 2.80V has the
following CAT code:
R7ZS
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON 3535L Line emitters. Although several bins are outlined,
product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 3535L Line.
BIN
LUMINOUS FLUX [1] (lm)
MINIMUM
MAXIMUM
J
24
28
K
28
32
L
32
36
M
36
40
P
40
44
Q
44
48
R
48
52
S
52
56
T
56
60
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
10
Color Bin Definitions
0.4400
0.4300
A3
A5
A1
0.4200
y
0.4100
A2
A4
A6
0.4000
0.3900
0.4800
0.4850
0.4900
0.4950
0.5000
0.5050
0.5100
0.5150
0.5200
0.5250
0.5300
x
Figure 8. 3-step MacAdam ellipse illustration for Table 6.
Figure 9a. Color bin structure for LUXEON 3535L Line 2200K.
Table 6a. Color bin definitions for LUXEON 3535L Line for MXAx-PW22-xxxx.
BIN
A1
A2
A3
x
y
0.5178
0.4362
0.4996
0.4158
0.5262
0.4381
0.5075
0.4176
0.5154
0.4194
0.4972
0.3990
0.5075
0.4176
0.4897
0.3974
0.5075
0.4176
0.5010
0.4323
0.5154
0.4194
0.5046
0.4007
BIN
A4
A5
x
y
0.5094
0.4343
0.4996
0.4158
0.4972
0.3990
0.4917
0.4140
0.5094
0.4343
0.4917
0.4140
0.5178
0.4362
0.4996
0.4158
0.5075
0.4176
0.4996
0.4158
A6
0.4897
0.3974
0.4823
0.3957
Notes for Table 6a:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
11
0.4350
0.4300
0.4250
93
95
91
0.4200
0.4150
y
0.4100
96
0.4050
94
92
0.4000
0.3950
0.3900
0.4550
0.4600
0.4650
0.4700
0.4750
0.4800
0.4850
0.4900
0.4950
0.5000
0.5050
x
Figure 9b. Color bin structure for LUXEON 3535L Line 2500K.
Table 6b. Color bin definitions for LUXEON 3535L Line for MXAx-PW25-xxxx.
BIN
91
92
93
x
y
0.4944
0.4322
0.5010
0.4323
BIN
94
x
y
0.4774
0.4134
0.4845
0.4137
0.4917
0.4140
0.4746
0.3952
0.4845
0.4137
0.4670
0.3948
0.4845
0.4137
0.4813
0.4319
0.4917
0.4140
0.4879
0.4320
0.4823
0.3957
0.4774
0.4134
95
0.4746
0.3952
0.4703
0.4132
0.4879
0.4320
0.4703
0.4132
0.4944
0.4322
0.4845
0.4137
0.4774
0.4134
96
0.4774
0.4134
0.4670
0.3948
0.4593
0.3944
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
12
0.4450
0.4350
0.4250
81
83
85
0.4150
8Z
y
0.4050
82
84
86
0.3950
2580K
2870K
0.3850
0.3750
0.4300
0.4350
0.4400
0.4450
0.4500
0.4550
0.4600
0.4650
0.4700
0.4750
0.4800
0.4850
0.4900
x
Figure 9c. Color bin structure for LUXEON 3535L Line 2700K.
Table 6c-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW27-xxxx.
BIN
81
82
83
x
y
BIN
0.4625
0.4113
0.4729
0.4299
0.4813
0.4319
0.4625
0.4113
0.4703
0.4132
0.4520
0.3927
0.4520
0.3927
0. 4468
0.4077
0.4625
0.4113
0. 4562
0.4260
0.4703
0.4132
0.4646
0.4280
84
85
x
y
0.4446
0.3910
0.4546
0.4095
0.4593
0.3944
0.4546
0.4095
0.4546
0.4095
0.4373
0.3893
0.4646
0.4280
0.4729
0.4299
0.4625
0.4113
86
0.4468
0.4077
0.4546
0.4095
0.4446
0.3910
Table 6c-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW27-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
8Z
(0.4578, 0.4101)
0.0081
0.0042
53.70º
Notes for Tables 6c-1 and 6c-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
13
0.4400
0.4300
0.4200
71
73
0.4100
75
y
7Z
0.4000
76
72
74
0.3900
2870K
3200K
0.3800
0.3700
0.4050
0.4100
0.4150
0.4200
0.4250
0.4300
0.4350
0.4400
0.4450
0.4500
0.4550
0.4600
0.4650
x
Figure 9d. Color bin structure for LUXEON 3535L Line 3000K.
Table 6d-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW30-xxxx.
BIN
71
72
73
x
y
x
y
0.4386
0.4474
0.4048
0.4222
0.3840
0.4228
0.4305
0.4019
0.4562
0.4260
0.4386
0.4048
0.4468
0.4077
0.4298
0.3867
0.4298
0.3867
0.4223
0.3990
0.4386
0.4048
0.4468
0.4077
BIN
74
75
0.4299
0.4165
0.4387
0.4197
0.4373
0.3893
0.4305
0.4019
0.4305
0.4019
0.4147
0.3814
0.4387
0.4197
0.4223
0.3990
0.4305
0.4019
0.4222
0.3840
0.4474
0.4228
0.4386
0.4048
76
Table 6d-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW30-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
7Z
(0.4338, 0.403)
0.00834
0.00408
53.22º
Notes for Tables 6d-1 and 6d-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
14
0.4300
0.4200
0.4100
61
63
0.4000
65
y
6Z
0.3900
62
64
0.3800
3250K
66
0.3700
3750K
0.3600
0.3800
0.3850
0.3900
0.3950
0.4000
0.4050
0.4100
0.4150
0.4200
0.4250
0.4300
0.4350
0.4400
x
Figure 9e. Color bin structure for LUXEON 3535L Line 3500K.
Table 6e-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW35-xxxx.
BIN
61
62
63
x
y
0.4130
0.3944
0.4198
0.4115
0.4299
0.4165
BIN
64
x
y
0.3975
0.3731
0.4036
0.3898
0.4130
0.3944
0.4223
0.3990
0.4061
0.3773
0.4061
0.3773
0.3943
0.3853
0.4130
0.3944
0.3996
0.4015
65
0.4223
0.3990
0.4097
0.4065
0.4147
0.3814
0.4036
0.3898
0.4036
0.3898
0.3889
0.3690
0.4097
0.4065
0.3943
0.3853
0.4198
0.4115
0.4036
0.3898
0.4130
0.3944
0.3975
0.3731
66
Table 6e-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW35-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
6Z
(0.4073, 0.3917)
0.00927
0.00414
54.00º
Notes for Tables 6e-1 and 6e-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
15
0.4200
0.4100
0.4000
51
53
0.3900
y
55
5Z
0.3800
52
54
0.3700
3750K
56
0.3600
4250K
0.3500
0.3600
0.3650
0.3700
0.3750
0.3800
0.3850
0.3900
0.3950
0.4000
0.4050
x
Figure 9f. Color bin structure for LUXEON 3535L Line 4000K.
Table 6f-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW40-xxxx.
BIN
51
52
53
x
y
0.3869
0.3829
0.3916
0.3987
0.4006
0.4044
BIN
54
x
y
0.3746
0.3624
0.3786
0.3777
0.3869
0.3829
0.3952
0.3880
0.3822
0.3670
0.3822
0.3670
0.3703
0.3726
0.3869
0.3829
0.3736
0.3874
0.3952
0.3880
0.3826
0.3931
0.3898
0.3716
0.3786
0.3777
0.3786
0.3777
0.3670
0.3578
0.3826
0.3931
0.3703
0.3726
0.3916
0.3987
0.3786
0.3777
0.3869
0.3829
0.3746
0.3624
55
56
Table 6f-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW40-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
5Z
(0.3818, 0.3797)
0.00939
0.00402
53.72º
Notes for Tables 6f-1 and 6f-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
16
0.3900
0.3800
0.3700
31
33
y
0.3600
35
3Z
0.3500
32
34
4750K
36
0.3400
5250K
0.3300
0.3300
0.3350
0.3400
0.3450
0.3500
0.3550
0.3600
x
Figure 9g. Color bin structure for LUXEON 3535L Line 5000K.
Table 6g-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW50-xxxx.
BIN
31
32
33
x
y
0.3479
0.3580
0.3493
0.3712
0.3551
0.3760
BIN
34
x
y
0.3416
0.3408
0.3425
0.3536
0.3479
0.3580
0.3533
0.3624
0.3465
0.3448
0.3465
0.3448
0.3371
0.3493
0.3479
0.3580
0.3376
0.3616
0.3533
0.3624
0.3434
0.3664
0.3515
0.3487
0.3425
0.3536
0.3425
0.3536
0.3366
0.3369
0.3434
0.3664
0.3371
0.3493
0.3493
0.3712
0.3425
0.3536
0.3479
0.3580
0.3416
0.3408
35
36
Table 6g-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW50-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
3Z
(0.3447, 0.3553)
0.00822
0.00354
59.62º
Notes for Tables 6g-1 and 6g-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
17
0.3700
0.3600
21
23
0.3500
25
y
2Z
22
0.3400
5250K
24
26
0.3300
6000K
0.3200
0.3100
0.3150
0.3200
0.3250
0.3300
0.3350
0.3400
0.3450
x
Figure 9h. Color bin structure for LUXEON 3535L Line 5700K.
Table 6h-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW57-xxxx.
BIN
21
22
23
x
y
0.3319
0.3446
0.3320
0.3565
0.3376
0.3616
0.3371
BIN
x
y
0.3270
0.3285
0.3267
0.3399
0.3319
0.3446
0.3493
0.3318
0.3327
0.3318
0.3327
0.3215
0.3353
0.3319
0.3446
0.3207
0.3462
0.3371
0.3493
0.3263
0.3513
0.3366
0.3369
0.3267
0.3399
0.3267
0.3399
0.3222
0.3243
0.3263
0.3513
0.3320
0.3565
0.3319
0.3446
24
25
26
0.3215
0.3353
0.3267
0.3399
0.3270
0.3285
Table 6h-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW57-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
2Z
(0.3287, 0.3417)
0.00746
0.0032
59.09°
Notes for Tables 6h-1 and 6h-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
18
0.3650
0.3550
0.3450
11
13
0.3350
12
1Z
15
y
0.3250
6000K
14
16
0.3150
7000K
0.3050
0.2950
0.2950
0.3000
0.3050
0.3100
0.3150
0.3200
0.3250
0.3300
x
Figure 9i. Color bin structure for LUXEON 3535L Line 6500K.
Table 6i-1. Color bin definitions for LUXEON 3535L Line for MXAx-PW65-xxxx.
BIN
11
12
13
x
y
0.3158
0.3317
0.3146
0.3422
0.3206
0.3481
BIN
14
x
y
0.3119
0.3162
0.3103
0.3263
0.3158
0.3317
0.3213
0.3371
0.3170
0.3212
0.3170
0.3212
0.3048
0.3209
0.3158
0.3317
0.3028
0.3304
0.3213
0.3371
0.3087
0.3363
0.3221
0.3261
0.3103
0.3263
0.3103
0.3263
0.3068
0.3113
0.3087
0.3363
0.3048
0.3209
0.3146
0.3422
0.3103
0.3263
0.3158
0.3317
0.3119
0.3162
15
16
Table 6i-2. Color bin definition for single 3-step MacAdam ellipse MXAx-PW65-xxxx.
COLOR SPACE
CENTER POINT
(cx, cy)
MAJOR AXIS,
a
MINOR AXIS,
b
ELLIPSE ROTATION
ANGLE, θ
1Z
(0.3123, 0.3282)
0.00669
0.00285
58.57°
Notes for Tables 6i-1 and 6i-2:
1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space.
2. Tested and binned at 25ºC and If=100mA.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
19
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 3535L Line.
FORWARD VOLTAGE [1] (Vf)
BIN
MINIMUM
MAXIMUM
S
2.70
2.80
T
2.80
2.90
V
2.90
3.00
W
3.00
3.10
X
3.10
3.20
Y
3.20
3.30
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Tested and binned at 25ºC and If=100mA.
Mechanical Dimensions
Figure 10. Mechanical dimensions for LUXEON 3535L.
Notes for Figure 10:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
20
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3535L Line.
PROFILE FEATURE
LEAD-FREE ASSEMBLY
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON 3535L Line.
LEVEL
2
FLOOR LIFE
SOAK REQUIREMENTS STANDARD
TIME
CONDITIONS
TIME
CONDITIONS
1 Year
≤30°C / 60% RH
168 Hours +5 / -0
85°C / 60% RH
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
21
Solder Pad Design
2.60
2.40
0.82
1.02
Solder mask
0.25
0.65
0.30
Stencil
Top copper
Package geometric center
1.93
1.80
Package and pad outlines
2.13
0.50
0.50
Figure 12. Recommended PCB solder pad layout for LUXEON 3535L Line.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging Information
3,95±0,1
5,5±0,05
1,2±0,1
12+0,3
-0,1
2±0,05
,1
+0
5 -0
1,
4±0,1
1,75±0,1
Pocket Tape Dimensions
3,8±0,1
,25
+0
0
1,5 -
8±0,1
0,28±0,02
Figure 13. Pocket tape dimensions for LUXEON 3535L Line.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
22
Reel Dimensions
329
100 +/-0.5
13,1 +0,5
-0,2
18.4 (max, measure at hub)
1.5
n
mi
+2
12,4-0
Figure 14. Reel dimensions for LUXEON 3535L Line.
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS203-L LUXEON 3535L (Legacy) Product Datasheet 20160927 ©2016 Lumileds Holding B.V. All rights reserved.
23
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2016 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS203-L LUXEON 3535L (Legacy)
Product Datasheet 20160927
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.
Similar pages