ML-E Color Series on Linear Board Cree ML-E Color Series on Linear Board The lighting class ½-watt XLamp ML-E LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, LED replacement lamps, fluorescent retrofits and retail-display lighting. FEATURES > Available in royal blue, blue, green, amber & red > Wide Viewing Angle: 125° > Electrically Neutral Thermal Path APPLICATIONS > Vehicle > Landscape > Consumer Portable > High End Portable > Architectural FLUX CHARACTERISTICS (per LED) COLOR Blue Green Red Amber Royal Blue CHARACTERISTICS Thermal Resistance, Junction to Solder Point- white, royal, blue Thermal Resistance, Junction to Solder Point- green, red Thermal Resistance, Junction to Solder Point- amber Viewing angle (FWHM)- royal, blue, green, amber, red Temperature coefficient of voltage- royal, blue Temperature coefficient of voltage- green Temperature coefficient of voltage- red Temperature coefficient of voltage- amber ESD classification (HBM per Mil-Std-883D) DC forward current- royal, blue, green, red DC forward current- amber Reverse voltage Forward voltage (@ 150 mA)- royal, blue Forward voltage (@ 150 mA)- green Forward voltage (@ 150 mA)- red Forward voltage (@ 150 mA)- amber LED junction temperature DWL (nm) MIN.FLUX (LM) @350MA KIT USED 10.7 465-485 0T01 30.6 520-535 O001 18.1 0V01 620-630 30.6 585-595 O001 175 (@150 mA) 450-465 O502 UNIT °C/W °C/W °C/W degrees mV/°C mV/°C mV/°C mV/°C mA mA V V V V V °C MINIMUM TYPICAL 11 15 24 125 -3.3 -4 -1.8 -1 Class 2 MAXIMUM 350 250 -5 3.2 3.45 2.2 2.4 It is highly recommended for the user to review the CREE Series page for additional and most recent technical data at: http://www.cree.com/led-components-and-modules/products/xlamp/discrete-directional/xlamp-mle Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected] 150 ML-E Color Series on Linear Board * Exceeding maximum ratings may damage the LED and cause potential safety hazards. * Elevated operating temperatures can be expected to negatively impact the service life (lumen output) * All data is related to entire assembly. Data reflects statistical mean values. Actual data may differ depending on variances in the manufacturing process. * End users need to take into account the lumen depreciation as the temperature rises with various thermal solutions installed. Note 1: Using continuously under elevated loads (i.e. the application of high temperature/current/voltage or a significant change in temperature, etc.) may cause this product to significantly decrease in reliability even if the operating conditions are within the absolute maximum ratings. Note 2: The thermal resistance from the LED junction to ambient temperature, Rth(j-a), should be kept below 100C/W so that the LED is not exposed to a condition beyond the absolute maximum ratings. Note 3: The temperature of the LED assembly must be measured at the TC-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature sensitive label. Hardware (not included) > Mount with #4 Machine Screws. > 16AWG Maximum Wire Gauge. > Use only with constant current power supplies. PCB Fabrication > Layer Count: 1 > Core Material: 6061-T6 Aluminum > Single Layer Copper Weight: 1oz > Solder Mask: White > Finishing Plating: Pb Free HASL The information contained herein is subject to change without notice. Global Headquarters, 3 Northway Lane North, Latham, NY 12110, USA www.marktechopto.com TOLL FREE: 1-800-984-5337 • PHONE: 518-956-2980 • FAX: 518-785-4725 • EMAIL: [email protected]