ETC2 MG12KB To change without notice accessory Datasheet

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
MISCELLANEOUS HARDWARE
& ACCESSORIES
SWITCH HARDWARE....................................... D2 - D4
PUSHBUTTON AND TOGGLE CAPS............... D5 - D6
SECURITY GUARDS......................................... D7 - D9
SEALING BOOTS.............................................. D10 - D14
VL SERIES LED INDICATORS.......................... D15 - D16
D
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D1
MISCELLANEOUS HARDWARE
HEX NUT A112 Nickel plated brass
1/4-40
HEX NUT Brass 1/4-40
Nickel plated U76 Matte black U94
8.00
(.314)
9.00
(.354)
HEX NUT Brass
Chrome plated U1916
2.00
(.078)
2.00
(.086)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
6.35 DIA-40UNS
(1/4-40UNS)
HEX NUT U842 10mm (.393")
Nickel plated brass
D
12.00
(.472)
HEX NUT A465
Nickel plated brass 15/32-32
HEX NUT Brass 15/32-32
Nickel plated U162 Matte black U41
Chrome plated U92
14.00
(.551)
2.30
(.090)
10.00 DIA x 0.75 SI
(.393 DIA X 0.75 SI)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
2.30
(.090)
PAL NUT U42 12mm (.472")
Zinc plated steel
12.00DIA X 0.75SI
(.472DIA X 0.75SI)
12.00DIA X 0.75SI
(.472DIA X 0.75SI)
HEX NUT 10-621 16mm (.629")
Nickel plated brass
19.00
(.748)
12.00DIA X 0.75SI
(.472DIA X 0.75SI)
14.00
(.551)
11.90 DIA-32UNS
(15/32-32UNS)
HEX CAP NUT Brass 12mm (.472")
Chrome plated U35
HEX NUT Brass 12mm (.472")
Nickel plated U166 Matte black U183
Chrome plated U212
3.00
(.118)
2.30
(.09)
HEX NUT U1950-5 19mm (.748")
Nickel plated brass
22.00
(.866)
3.00
(.118)
1.20-45
(.047-45 )
16.00
(.629)
3.50
(.137)
16.00
(.629)
2.20
(.086)
16.00 DIAx1.00 SI
(.629 DIAx1.00 IS)
HEX NUT 10-855-5 19mm (.748")
Nickel plated brass
22.00
(.866)
4.00
(.157)
HEX NUT U1951-5 22mm (.866")
Nickel plated brass
25.00
(.984)
3.00
(.118)
HEX NUT 10-856-5 22mm (.866")
Nickel plated brass
25.00
(.984)
1.30-45
(.051-45 )
19.00 DIAx1.00 SI
(.748 DIAx1.00 IS)
PANEL DRESS NUT A168P1
Blind thread, Nickel plated brass
1/4-40
D2
19.00 DIAx1.00 SI
(.748 DIAx1.00 IS)
4.00
(.157)
HEX NUT U2059-5 24mm (.944")
Nickel plated brass
27.00
(1.062)
1.30-45
(.051-45 )
22.00 DIAx1.00 SI
(.866 DIAx1.00 IS)
PANEL DRESS NUT A168P2
Thru thread, Nickel plated brass
1/4-40
22.00 DIAx1.00 SI
(.866 DIAx1.00 IS)
PANEL DRESS NUT A274
Nickel plated brass 1/4-40
4.00
(.157)
1.30-45
(.051-45 )
24.00 DIAx1.00 SI
(.944 DIAx1.00 IS)
PANEL DRESS NUT A540
Nickel plated brass 15/32-32
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
12.00
(.472)
1.60
(.062)
HEX NUT Brass
Nickel plated U208 Matte black U726
MISCELLANEOUS HARDWARE (CONT'D.)
2.54
(.100)
8.00 DIA
(.314 DIA)
2.20
(.086)
9.00 DIA
(.354 DIA)
2.60
(.102)
4.80 DIA
(.188 DIA)
12.00 DIA
(.472 DIA)
9.00 DIA
(.354 DIA)
2.70
(.106)
2.70
(.106)
KNURLED CAP NUT Brass
Chrome plated U232
12.00 DIA
(.472 DIA)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
KNURLED NUT U2311 10mm (.393")
Chrome plated brass
2.20
(.086)
14.00 DIA
(.551 DIA)
6.35 DIA-40UNS
(1/4-40UNS)
KNURLED CAP NUT Brass
Chrome pl. U461 Matte black U502
2.60
(.102)
6.35 DIA-40UNS
(1/4-40UNS)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
KNURLED CAP NUT Brass 1/4-40
Chrome pl. U268 Matte black U725
6.35 DIA-40UNS
(1/4-40UNS)
14.00 DIA
(.551 DIA)
10.00 DIA x 0.75 SI
(.393 DIA X 0.75 SI)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
KNURLED CAP NUT U2220
10mm (.393") Chrome plated brass
KNURLED NUT Brass 15/32-32
Nickel plated U53 Matte black U1634
16.00 DIA
(.629 DIA)
4.00
(.157)
6.60 DIA
(.259 DIA)
9.00 DIA
(.354 DIA)
2.20
(.086)
9.00 DIA
(.354 DIA)
6.35 DIA-40UNS
(1/4-40UNS)
KNURLED CAP NUT Brass 1/4-40
Chrome plated U216 Matte black U218
KNURLED NUT U826
Nickel plated brass
5.20 DIA
(.204 DIA)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
6.35 DIA-40UNS
(1/4-40UNS)
KNURLED NUT Brass 1/4-40
Nickel plated U229 Matte black U230
2.00
(.078)
5.20 DIA
(.204 DIA)
7.70 DIA
(.303 DIA)
KNURLED NUT U501 1/4-40
Chrome plated brass
4.80 DIA
(.188 DIA)
KNURLED NUT U369 1/4-40
Nickel plated brass
5.20 DIA
(.204 DIA)
DECORATIVE NUT A447
Thru thread, chromium plated brass
1/4-40
2.50
(.098)
10.00 DIA x 0.75 SI
(.393 DIA X 0.75 SI)
11.90 DIA-32UNS
(15/32-32UNS)
16.00 DIA
(.629 DIA)
16.00 DIA
(.629 DIA)
PANEL DRESS NUT Brass 12mm
(.472") Nickel plated U411, Matte
black U413, Chrome plated U412
16.00 DIA
(.63 DIA)
11.90 DIA-32UNS
(15/32-32UNS)
11.90 DIA-32UNS
(15/32-32UNS)
INSULATED PANEL DRESS NUT
12mm (.472") ABS or polyamide with
glass fiber. blue U521, black U522,
green U523, gray U524, yellow U525,
red U526, white U527/1, orange U529
2.50
(.098)
KNURLED NUT 10-960-5
16mm (.629") Nickel plated brass
18.50 DIA
(.728 DIA)
16.00 DIA
(.629 DIA)
4.00
(.157)
KNURLED NUT U1977-5
19mm (.748") Nickel plated brass
22.00 DIA
(.866 DIA)
4.50
(.177)
4.00
(.157)
17.00 DIA
(.669 DIA)
4.00
(.157)
16.00 DIAx1.00 SI
(.629 DIAx1.00 IS)
1.20 - 45
(.047 - 45 )
3.00
(.118)
16.00 DIA
(.629 DIA)
3.00
(.118)
10.3 (.405)
KNURLED CAP NUT Brass
12mm (.472") Chrome plated U118
Matte black U130
KNURLED CAP NUT Brass
12mm (.472") Chrome plated U117
Matte black U129
4.00
(.157)
8.20 DIA
(.322 DIA)
8.70 DIA
(.342 DIA)
4.00
(.157)
KNURLED CAP NUT U124 15/32-32
Chrome plated brass
8.5 (.334)
KNURLED CAP NUT U123 15/32-32
Chrome plated brass
19.00 DIAx1.00 SI
(.748 DIAx1.00 IS)
1.30-45
(.051-45 )
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D3
D
MISCELLANEOUS HARDWARE (CONT'D.)
LOCKWASHER 1/4
Stainless steel U215
0.40
(.015)
LOCKWASHER U14 .122 I.D.
9.50 DIA
(.374 DIA)
LOCKWASHER U843 10mm (.393")
Stainless steel
LOCKWASHER A115
Nickel plated steel 1/4
0.50
(.019)
14.40 DIA
(.566 DIA)
0.80
(.031)
3.10 DIA
(.122 DIA)
6.50 DIA
(.255 DIA)
1.40
(.055)
0.40
(.015)
10.30 DIA
(.405 DIA)
LOCKWASHER U13 15/32
Zinc plated
LOCKWASHER A466
Nickel plated steel 15/32
17.00 DIA
(.669 DIA)
LOCKING RING 1/4
Nickel plated U78 Matte black U93
9.60 DIA
(.377 DIA)
0.50
(.019)
2.00
(.078)
5.20
(.204)
D
ANTI-ROTATE RING A107
Nickel plated brass 1/4
1.40
(.055)
12.10 DIA
(.476 DIA)
LOCKING RING Brass
Nickel plated U198 Matte black U728
6.50 DIA
(.255 DIA)
ANTI-ROTATE RING (LARGE) A158
Nickel plated brass 1/4
LOCKING RING U844 10mm (.393")
Nickel plated
14.00 DIA
(.551 DIA)
11.80 DIA
(.464 DIA)
0.80
(.031)
ANTI-ROTATE RING A482
Nickel plated brass 15/32
2.50
(.098)
0.80
(.031)
1.10
(.043)
10.20 DIA
(.401 DIA)
LOCKING RING 12mm (.472")
Nickel plated U121 Matte black U12
SEALING WASHER U60 15/32
12.00 DIA
(.472 DIA)
2.80
(.110)
0.80
(.031)
17.00 DIA
(.669 DIA)
11.10
(.437)
15.00 DIA
(.590 DIA)
10.60 DIA
(.417 DIA)
11.80 DIA
(.464 DIA)
9.60
(.377)
11.20
(.440)
2.30
(.090)
12.20 DIA
(.48 DIA)
SWITCH PLATE ON-OFF U19
.480 I.D.
0.50
(.019)
6.35
(.25)
21.00 DIA
(.826 DIA)
18.00 DIA
(.708 DIA)
6.00 DIA
(.236 DIA)
ON
28.00
(1.102)
I
28.00
(1.102)
12.20 DIA
(.48 DIA)
18.00 DIA
(.708 DIA)
CONNECTING SCREW U03
4.50
(.177)
SWITCH PLATE I-O U1050
.480 I.D.
0.80
(.031)
GROUND CONNECTOR
12mm (.472") Nickel plated U187
0.50
(.019)
12.20 DIA
(.480 DIA)
2.30
(.090)
6.40 DIA
(.251 DIA)
SEALING WASHER Nylon
12mm (.472") U21
18.20 DIA
(.716 DIA)
5.80
(.228)
18.20 DIA
(.716 DIA)
SEALING WASHER U360 1/4-40
For keyway bushing
1.00
(.039)
6.10 DIA
(.240 DIA)
5.65
(.222)
9.40
(.370)
5.50
(.216)
6.20
(.244)
2.00
(.078)
12.20 DIA
(.48 DIA)
OFF
3.00 DIAx0.5
(.118 DIAx0.5)
12.20 DIA
(.48 DIA)
D4
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
5.80 DIA
(.228 DIA)
Note: additional caps are
shown in some switch sections.
MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
PANEL DRESS NUTS & CAPS FOR PUSHBUTTON SWITCHES
ASSEMBLY
NUMBER
A1354P1
A1354P2
A1354P3
A1355P1
FITS SWITCH
MODEL
810/820
401/402
PB
810/820
OPTION(S)
REQUIRED
KM
S
PY
KM
INCLUDES
DRESS NUT
A495P1
A495P1
A495P1
A495P2
CAP
B494P1
B494P2
B494P3
B494P1
A1355P2
A1355P2
A1355P3
302
401/402
PB
NONE
NONE
PY or P2Y1
A495P2
A495P2
A495P2
B494P2
B494P2
B494P3
(P.T.)
PART NO.
A495P1
A495P2
A DIA.
.385
.413
'A' dimension is determined by
panel thickness indicated in table
and allows for (1) back-up Nut
A112 and (1) Lockwasher A115.
Order these separately to provide
for secure, vibration resistant
mounting.
B DIA.
.323
.245
COLOR CAP Vinyl plastisol
Order Assembly Number from chart to left. Add cap color no.
from color code chart below. Example: A1354P36 indicates
assembly to fit a PB switch and is supplied with a red cap.
SWITCH
MODEL
810/820
PB
PB
302
401/402
401/402
OPTION
(IF REQ'D)
KM
PY
P2Y1
S
A1354
A
P.T.
.040
.062
.100
.125
.130
.062
A1355
A
P.T.
.090
.093
.135
.171
.120
.093
.070
.078
.130
.078
-
PUSHBUTTON CAP A212
PUSHBUTTON CAPS (ALL)
Material - Nylon
PART NO.
DIM. A
A118
5/16
FITS ACTUATOR
K
A391
3/16
L2
A392
3/4
L
Caps press fit adequately, however
they may be pulled off. If permanent
retention is required, cement with
Loctite 405 or equivalent, insuring
no cement enters switch.
FITS PB SERIES
COLOR CAPS B366 & B497
PUSHBUTTON CAPS A180 & A496
B366 fits 300 & 400 Series with
S option only, and all PB Series.
A180 fits all PB Series.
A496 fits 800 Series with options
KM, KS, KM1, K1M1, K2M, K2S
&K2M1.
B497 fits 800 Series with options
KM, KS, KM1, K1M1 & K2M1.
PUSHBUTTON CAP A420
PUSHBUTTON CAP A235
* - Fits all 300 Series except 301
& 305. Fits 301 & 305 with S
option. Fits all 400 & PB Series.
* - fits all PB, 300 & 400 Series.
** - fits 800 Series with options
KM, KS, KM1 & K2M1.
** - Fits 800 Series withoptions KM,
KS, KM1 & K2M1.
STANDARD COLOR CODE
For nylon caps, actuators, bezels & bezel inserts.
To specify, add selected color code to part number. Example: A2122 is a
black A212 Cap.To specify for actuators, bezels and bezel inserts, see
'Order Format' section following specific series information in this catalog.
Code
1
3
5
7
9
Color
blue
green
yellow
ivory
orange
Code
2
4
6
8
Color
black
gray
red
white
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D5
D
MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS (CONT'D.)
COLOR CAP B494
PUSHBUTTON CAP A631
** - P1 fits all 800 Series except
K1M & K1S.
* - Fits all 300 Series except 301
& 305. Fits 301 & 305 with S
option. Fits all 400 & PB Series.
* - P2 fits all 300 & 400 Series.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
** - Fits 800 Series with options KM,
KS, KM1 & K2M1.
* - P3 fits all PB Series.
CUSTOM MARKING
PUSHBUTTON CAP A632
Permanent ink marking is available
for switch caps, bezels and rocker
actuators. Consult factory with your
special requirement. Representative
samples available.
Fits all PB Series.
D
SWITCH GUARDS
Materials: 5056-H18 aluminum with clear or black anodize, or free machining brass withbright chrome plate.
Dimensions in inches and (millimeters). Tolerances: A & D, ±.015" B & C, ±.005"
MODEL
MG11A
MG11B
TH'D.
10-48
10-48
COLOR
NATURAL AL
BLACK AL.
FINISH
PLAIN
PLAIN
MG12A
MG12B
MG12C
MG12KA
MG12KB
MG12KC
MG13A
1/4-40
1/4-40
1/4-40
1/4-40
1/4-40
1/4-40
1/4-40
NATURAL AL.
BLACK AL.
CHROMED BR.
NATURAL AL.
BLACK AL.
CHROMED BR.
NATURAL AL.
PLAIN
PLAIN
PLAIN
KNURLED
KNURLED
KNURLED
PLAIN
MG13B
MG13C
1/4-40
1/4-40
BLACK AL.
PLAIN
CHROMED BR. PLAIN
A
B
C
D
.530 (13.5) .413 (10.5) .315 (8.0) .236 (6.0)
.730 (18.5) .610 (15.5) .315 (8.0) .236 (6.0)
STANDARD COLOR CODE
For nylon caps, actuators, bezels & bezel inserts.
To specify, add selected color code to part number. Example: A2122 is a
black A212 Cap.To specify for actuators, bezels and bezel inserts, see
'Order Format' section following specific series information in this catalog.
CAPS FOR PRINTED CIRCUIT BOARD PROCESSING
Outline
Code
1
3
5
7
9
Color
blue
green
yellow
ivory
orange
Code
2
4
6
8
Material
Part No.
S
Vinyl
U3012
TP
Vinyl
U3502
Series
Color
black
gray
red
white
16.00
(.629)
Available on models with plain bushing.
Supplied mounted on switches or separately.
Provides additional protection during pcb processing.
17.45
(.687)
4.76 DIA
(.187 DIA)
3.96 DIA
(.155 DIA)
D6
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
FEATURES
●
●
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
●
●
●
Security guards prevent inadvertent switch operation.
When guard cap is raised, switch actuator operates freely.
When guard cap is depressed, switch actuator is locked
in set position.
Designed for use on switches with 11.9mm (.468") or
12mm (.472") dia. threaded bushings and actuator length
17.5mm (.688") outside bushing .
Adjust guard for correct switch operation with 2 nuts.
MATERIALS
Support plate:
Cap:
Matte black steel
Thermoset plastic
D
Series 20 - for 2 position switches
Actuator returned then locked in down position (OFF)
MODEL NO.
22
23
24
25
26
27
28
25/28
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Black/yellow striped
Series 30 - for 3 position switches
Actuator returned then locked in upper position
MODEL NO.
32
33
34
35
36
37
38
39
35/38
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Yellow
Black/yellow striped
Series 40 - for 2 position switches
Actuator returned then locked in upper position
MODEL NO.
42
43
44
45
46
47
48
49
45/48
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Blue
Black/yellow striped
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D7
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
MODEL NO.
52
53
54
55
56
57
58
59
55/58
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Blue
Black/yellow striped
D
Series 60 - for 3 position switches
Actuator returned then locked in upper position
MODEL NO.
62
63
64
65
66
67
68
69
65/68
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Blue
Black/yellow striped
Series 70 - for 2 position switches
Actuator returned then locked in upper position
MODEL NO.
72
73
74
75
76
77
78
79
75/78
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Yellow
Black/yellow striped
Series 20PN - for 2 position switches
Actuator returned then locked in down position (OFF)
Option P - holes for wiring seal standard on this model
MODEL NO.
22PN
23PN
24PN
25PN
26PN
27PN
28PN
29PN
D8
COLOR
Gray
White
Orange
Black
Red
Green
Yellow
Blue
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Series 50 - for 2 position switches
Actuator returned then locked in down position (OFF)
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
PANEL CUT-OUTS & OPTIONS
With keying
Series 20 - 30 - 40
With locking ring
With 'D' flat
Series 50 - 60 - 70
P Holes for wiring seal
Cap engraving available - consult factory.
Other locking configurations such as locked center position available - consult factory.
D
SECURITY GUARDS for switch series 3500, 600H and 6000
Series 90
Actuator locked in center position
Bushing shapes - for standard products
B
A
D
C
- for other products
F
E
H
G
Security guard cap shape
1
Locks in center
position
Prevents down
position
Security guard cap colors
OPTION
1
2
3
4
5
6
7/1
9
0
4
3
2
COLOR
Blue
Black
Green
Gray
Yellow
Red
White
Orange
Striped (see
color of stripes)
Prevents up
position
Locks in down
position
Color of stripes
OPTION
A
B
C
D
STRIPE 1
Red
Yellow
Red
White
STRIPE 2
Black
Black
White
Black
5
Locks in up
position
How to order
Series
9
Bushing shape Cap shape Cap color Color of stripes
0
Fill in boxes by making selections from each category
indicated.
Example of completely specified
model number:
90A10B
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D9
SEALING BOOTS FOR SWITCHES
●
●
●
●
●
Prevents dust, sand and water from entering switches.
Prevents ice from blocking actuator movement on toggle switches.
Compatible with internally sealed toggle and pushbutton actuators.
Available in a wide range of colors .
Each boot is supplied with a sealing ring or washer.
MATERIALS AND SPECIFICATIONS
D
Boot material:
Nut material:
Operating temperature:
Neoprene or silicone (see comparative advantages below)
Nickel plated or matte black finished brass
Neoprene; -20°C to 50°C
-40°C to 85°C
Comparative
Advantages
Temperature Range
Low
High
Elasticity
Mechanical
Resistance
Silicone
Neoprene
Excellent
Poor
Excellent
Poor
Poor
Excellent
Excellent
Good
TYPES OF BOOTS - CROSS SECTIONS
Full toggle*
(standard)
Half toggle*
* Color options available
Two part* (no metal
parts accessible)
For double sealing
EXAMPLES OF MOUNTING
For toggle bushing 6 x 0.75 (.236 x 0.75) - 5500 series
NUT
Knurled
Nickel plated
Knurled
Matte black
Hex
Nickel plated
Hex
Matte black
D10
FULL TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1341
U1341-6
U1341-3
U1341-7
U1343
U1343-6
U1343-3
U1343-7
U1302
U1302-6
U1302-3
U1302-7
U1304
U1304-6
U1304-3
U1304-7
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FEATURES
SEALING BOOTS FOR SWITCHES
For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
NUT
Knurled
Nickel plated
Knurled
Matte black
Hex
Nickel plated
Hex
Matte black
FULL TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1331
U1331-6
U1331-3
U1331-7
U1333
U1333-6
U1333-3
U1333-7
U1229
U1229-6
U1229-3
U1229-7
U1231
U1231-6
U1231-3
U1231-7
D
For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series
NUT
SILICONE BOOTS (supplied as 2 separate parts)
Black
Red
Green
White
U5149
U5149-6
U5149-3
U5149-7
When boot is mounted onto panel, metal parts of switch are
completely covered by insulation.
For toggle bushing 10 x 0.75 (.393 x 0.75) - 10600 series
KNURLED
NUT
Nickel plated
FULL TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1612 U1612-6 U1612-3 U1612-7
Matte black
U1614
U1614-6
U1614-3
U1614-7
For toggle bushing 11,9-32 (15/32-32NS) - 12000, 3500 and 6000 series
HEX NUT
Nickel plated
FULL TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1031 U1031-6 U1031-3 U1031-7
Matte black
U1024
U1024-6
U1024-3
U1024-7
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D11
SEALING BOOTS FOR SWITCHES
HEX NUT
Nickel plated
HALF TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1600 U1600-6 U1600-3 U1600-7
Matte black
U1602
U1602-6
U1602-3
U1602-7
D
For toggle bushing 12 X 0.75 SI (.472 X 0.75 IS) - 4450, 4650 and 1600 series
HEX NUT
FULL TOGGLE BLACK
NEOPRENE BOOTS
U09
Nickel plated
Matte black
U223
For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 600SH, 660, 1000, 1500 and 3600
series
HEX NUT
Nickel plated
FULL TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1565 U1565-6 U1565-3 U1565-7
Matte black
U1567
U1567-6
U1567-3
U1567-7
FULL TOGGLE BLACK
NEOPRENE BOOTS
Nickel plated
U851
Matte black
U853
For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 660, 1000 and 3600 series
HEX NUT
Nickel plated
HALF TOGGLE SILICONE BOOTS
Black
Red
Green
White
U1151 U1151-6 U1151-3 U1151-7
Matte black
U1153
U1153-6
U1153-3
U1153-7
HALF TOGGLE BLACK
NEOPRENE BOOTS
D12
Nickel plated
U598
Matte black
U600
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
For toggle bushing 11,9-32NS (15/32-32NS) - 12000, 3500 and 6000 series
SEALING BOOTS FOR SWITCHES
For pushbutton bushing 4 x 0.70 (.157 x 0.70) - 9500 series
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
HEX NUT
Nickel plated
PUSHBUTTON SILICONE BOOTS
Black
Red
Green
White
U1829 U1829-6 U1829-3 U1829-7
Matte black
U1831
U1831-6
U1831-3
U1831-7
D
For pushbutton bushing 6,35-40NS (1/4-40NS) - 18000, 9000 and 13000 series
NUT
Knurled
Nickel plated
Knurled
Matte black
Hex
Nickel plated
Hex
Matte black
PUSHBUTTON SILICONE BOOTS
Black
Red
Green
White
U1401
U1401-6
U1401-3
U1401-7
U1403
U1403-6
U1403-3
U1403-7
U1318
U1318-6
U1318-3
U1318-7
U1320
U1320-6
U1320-3
U1320-7
For pushbutton bushing 10 x 0.75 (.393 x 0.75) - 10400 series
KNURLED
NUT
Nickel plated
PUSHBUTTON SILICONE BOOTS
Black
Red
Green
White
U1624 U1624-6 U1624-3 U1624-7
Matte black
U1626
U1626-6
U1626-3
U1626-7
For pushbutton bushing 11,9-32NS (15/32-32NS) - 13000X778 and 13000X768 series
HEX NUT
Nickel plated
PUSHBUTTON SILICONE BOOTS
Black
Red
Green
White
U589
U589-6
U589-3
U589-7
Matte black
U590
U590-6
U590-3
U590-7
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D13
SEALING BOOTS FOR SWITCHES
HEX NUT
Nickel plated
PUSHBUTTON SILICONE BOOTS
Black
Red
Green
White
U1654 U1654-6 U1654-3 U1654-7
Matte black
U1656
U1656-6
U1656-3
U1656-7
PUSHBUTTON BLACK
NEOPRENE BOOTS
Nickel plated
U31
Matte black
U225
Chrome plated
U224
D
For double sealing IP series
TRANSPARENT SILICONE BOOT
U5125
For external sealing on A02 series
SILICONE BOOT
A02WPC
For 2600 series rocker switches
TRANSPARENT SILICONE BOOT
U2150
D14
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
For pushbutton bushing 12 x 0.75 SI (.472 x 0.75) - 1200, 4700 and 4800 series
VL SERIES LED INDICATORS
FEATURES
●
●
●
●
SPECIFICATIONS
Insulation resistance:
Dielectric strength:
Electric life at high temperature:
Torque:
Climatic category:
Protection level (sealed models):
In accordance with NFC 93680 standard
1000 megohms min.
250 Vrms, 50 Hz min.
72 hours at 85°C
1.25 Nm (.922 ft.lb.) max.applied to nut
40/085/21
IP67 per IEC 529
LED SPECIFICATIONS
MATERIALS
(T ambient = 25°C)
Forward voltage:
Nominal current:
Max. surge current:
Max. reversed voltage:
Max. forward current:
Max. power dissipation:
Bushing and collar:
2VDC (≤2.6V)
10mA
0.5 A (tp<10µs)
25V
40mA
100mW
D
Brass, bright or matte
black chrome plated
Lens:
Polycarbonate
Hardware supplied:
1 nickel plated brass
hex nut; 9mm (.354") across flats for 6mm (.236")
dia. indicator or 10mm (.393") across flats for 8mm
(.314") dia. indicator.
3.90 DIA
(.153 DIA)
6mm (.236") diameter - unsealed
Red
Yellow
Green
VL1000P600
VL1000P500
VL1000P300
VL100GP600
VL100GP500
VL100GP300
Note: Bright finish is standard.
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
0.50
(.019)
MATTE BLACK
FINISH
5.50
(.216)
BRIGHT
FINISH
2.54
(.100)
LED
COLOR
0.50
(.019)
(+)
9.00 DIA
(.354 DIA)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75 IS)
2.50
(.098)
7.50
(.295)
1.30 Maxi
(.051 MAX)
(-)
8mm (.314") diameter - unsealed
Red
Yellow
Green
VL3000P600
VL3000P500
VL3000P300
VL300GP600
VL300GP500
VL300GP300
Note: Bright finish is standard.
0.50
(.019)
MATTE BLACK
FINISH
7.50
(.295)
BRIGHT
FINISH
0.50
(.019)
(+)
2.54
(.100)
LED
COLOR
5.90 DIA
(.232 DIA)
8.00 DIA x 0.75 SI
(.314 DIA x 0.75 IS)
11.00 DIA
(.433 DIA)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
●
Indicators with red, yellow or green built-in LED.
Flatted bushing for anti-rotation.
2 bushing diameters: 6mm (.236") and 8mm (.314").
Sealed and unsealed models.
Bright chrome or matte black plated finishes.
(-)
3.00
(.118)
11.00
(.433)
1.60 Maxi
(.062 MAX)
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
D15
VL SERIES LED INDICATORS
6mm (.236") diameter - sealed
VL1CKGP600
VL1CKGP500
VL1CKGP300
Notes: Bright finish is standard. Lens cap is the
same color as the LED.
1.30 Maxi
(.051 MAX)
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
D
5.60
(.220)
0.50
(.019)
VL1CK0P600
VL1CK0P500
VL1CK0P300
5.50
(.216)
Red
Yellow
Green
0.50
(.019)
(+)
2.54
(.100)
MATTE BLACK
FINISH
5.50 DIA
(.216 DIA)
BRIGHT
FINISH
9.00 DIA
(.354 DIA)
O-RING
LED
COLOR
(-)
5.70
(.224)
8mm (.314") diameter - sealed
5.90 DIA
(.232 DIA)
8.00 DIA x 0.75 SI
(.314 DIA x 0.75 IS)
VL3CK0P600
VL3CK0P500
VL3CK0P300
VL3CKGP600
VL3CKGP500
VL3CKGP300
0.50
(.019)
Red
Yellow
Green
7.50
(.295)
MATTE BLACK
FINISH
2.54
(.100)
BRIGHT
FINISH
0.50
(.019)
(+)
9.50 DIA
(.374 DIA)
LED
COLOR
12.70 DIA
(.500 DIA)
O-RING
(-)
Note: Bright finish is standard. Lens cap is the
same color as the LED.
9.00
(.354)
7.00
(.275)
1.60 Maxi
(.062 MAX)
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
LED'S
5.70 DIA
(.224 DIA)
7.65
(.301)
11.40
(.448)
Cathode
23.20 TYPE
(.913)
2.54
(.100)
Cathode
26.50 TYPE
(1.043)
5.90
(.232)
2.54
(.100)
LED's per customer specifications
that meet drawings shown can be
supplied - consult factory.
3.25 DIA
(.127 DIA)
3.60
(.141)
2.80 DIA
(.110 DIA)
LED's are not removable.
8.60
(.338)
4.60
(.181)
4.95 DIA
(.194 DIA)
Observe polarity of DC supply to
LED's. Longer lead is anode (+).
Shorter lead is cathode (-) on flat
side of bushing (see drawing).
For 8mm (.314") indicators
For 6mm (.236") indicators
STANDARD HARDWARE AND PANEL CUT-OUTS
2.00
(.078)
9.00
(.354)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75 IS)
For 6mm (.236") indicators
D16
6.20 DIA
(.244 DIA)
2.50
(.098)
3.00
(.118)
10.00
(.393)
8.00 DIA x 0.75 SI
(.314 DIA x 0.75 IS)
8.20 DIA
(.322 DIA)
3.50
(.137)
For 8mm (.314") indicators
APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected]
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
3.90 DIA
(.153 DIA)
6.00 DIA x 0.75 SI
(.236 DIA x 0.75 IS)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
U13 U187 A482 MG12B U21 U166 U41 A235-2 U230 A107 A112 A115 A158 A274 A465 A466 U117
U12 U121 U123 U215 U411 U501 U78
Similar pages