Jing Heng MUR655CT Glass passivated super fast rectifier Datasheet

MUR620CT THRU MUR660CT
R
GLASS PASSIVATED SUPER FAST RECTIFIER
Reverse Voltage - 200 - 600V Volts
Forward Current - 6.0Amperes
S E M I C O N D U C T O R
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
Fast switching for high efficiency
Low forward voltage drop
Single rectifier construction
High surge capability
For use in low voltage ,high frequency inverters,
JF
MUR640CT
free wheeling ,and polarity protection applications
High temperature soldering guaranteed:260°C/10 seconds,
0.25"(6.35mm)from case
Component in accordance to RoHS 2011/65/EU
TO-220AB
0.185(4.70)
0.410(10.41)
0.140(4.10)
0.390(9.91)
0.147(3.74)
DIA
0.175(4.44)
0.055(1.39)
0.045(1.14)
0.114(2.90)
0.283(7.20)
0.102(2.60)
0.244(6.20)
PIN
2
1
3
1.161(29.50)
0.159(4.05)
0.114(2.90)
1.106(28.10)
0.138(3.50)
0.560(14.22)
0.053(1.34)
0.516(13.10)
0.047(1.20)
0.037(0.94)
MECHANICAL DATA
0.027(0.68)
0.105(2.67)
0.023(0.58)
0.095(2.41)
Case: JEDEC TO-220AC molded plastic body
0.014(0.35)
0.208(5.28)
0.192(4.88)
Terminals: Lead solderable per MIL-STD-750,method 2026
Polarity: As marked
Mounting Position: Any
Dimensions in inches and (millimeters)
Weight: 0.08ounce, 2.24 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25°C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive
load. For capacitive load,derate by 20%.)
Symbols
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified current(see Fig.1)
Per leg
Total device
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage
at 6.0 A(Note 1 )
Maximum instantaneous reverse
current at rated DC blocking
voltage(Note 1)
0.098(2.50)
VRRM
VRMS
VDC
Operating junction temperature range
Storage temperature range
MUR
660CT
200
400
600
140
280
420
200
400
600
Units
Volts
Volts
Volts
3.0
6.0
Amps
IFSM
150.0
75
Amps
VF
0.975
1.3
1.7
10
5
IR
TA =125°C
Typical thermal resistance (Note 3)
MUR
640CT
I(AV)
T A =25°C
Maximum Reverse Recovery Time (Note 2)
MUR
620CT
500
Volts
uA
35
ns
2.5
°C/W
TJ
-55 to+150
°C
TSTG
-55 to+150
°C
Trr
R
JC
Notes: 1. Pulse test: 300μs pulse width,1% duty cycle
2. Reverse recovery test conditions IF=0.5A,IR=1.0A, Irr=0.25A
3. Thermal resistance from junction to case
JINAN JINGHENG ELECTRONICS CO., LTD.
9-14
HTTP://WWW.JINGHENGGROUP.COM
RATINGS AND CHARACTERISTIC CURVES MUR620CT THRU MUR660CT
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT(AMPERES)
AVERAGE FORWARD CURRENT
AMPERES
FIG.1-FORWARD CURRENT DERATING CURVE
12
10
RESISTIVE OR INDUCTVE LOAD
8
6
4
2
0
0
20
40
60
80
100
120
180
150
LEAD TEMPERATURE (°C)
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
105
8.3ms Single Half Sine-Wave
(JEDEC Method)
90
75
60
45
30
15
0
1
2
20
50
100
FIG.4-TYPICAL REVERSE CHARACTERISTICS
20
50
10
10
INSTANTANEOUS REVERSE CURRENT (UA)
INSTANTANEOUS FORWARD CURRENT( AMPERES)
10
5
NUMBER OF CYCLES AT 60Hz
PULSE WIDTH=300 S
1% DUTY CYCLE
1
0.1
TJ=100°C
1
TJ=25°C
0.1
0.01
0.01
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
0.001
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE%
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE, C/ W
FIG.5-TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE(pF)
4000
TJ=25°C
f=1.0MHZ
Vsig=50mVp-p
1000
100
0.1
1
10
100
REVERSE VOLTAGE. VOLTS
JINAN JINGHENG ELECTRONICS CO., LTD.
100
10
1
0.1
0.01
0.1
1
10
100
T, PULSE DURATION ,sec.
9-15
HTTP://WWW.JINGHENGGROUP.COM
Similar pages