Lumileds L202-5080033C3000x Turnkey solution on a rigid substrate enabling high-efficacy design Datasheet

Illumination
LUXEON XR-3535L
Turnkey solution on a rigid substrate
enabling high-efficacy designs
LUXEON XR-3535L is a fully integrated solution optimized for lighting
applications requiring LED linear arrays mounted on a rigid and thermally
conductive substrate. The turnkey solution minimizes time to market and
simplifies supply chain by reducing optical and mechanical design efforts.
Combined with LUXEON 3535L, the integrated unit provides the same
powerful optical performance guaranteed by LUXEON LEDs. The overall
solution delivers optimized performance in combination with the quality
of light needed for distributed light source applications.
Features and BENEFITS
Primary Applications
1400–1500 lumen offerings enabling efficacies of up to 152 lm/W
Indoor Area Lighting
A full range of CCT offerings: 3000–5000K with 80CRI minimum
–– Troffers
Complete integrated solution guarantees simplified supply chain and
faster time to market
Super CEM3 PCB rigid substrate for mechanical robustness and efficient
heat dissipation
Two electrical connector options with snap-together or pushbutton
terminal blocks
Zhaga certified mechanical design for easy mounting and assembly
UL-recognized component [E335118]
RoHS
COMPLIANT
DS145 LUXEON XR-3535L Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED Spectral Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tray Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assembly Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Zhaga Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Lumileds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 3535L LEDs are tested and binned at 100mA and Tj=25ºC.
The nominal current for LUXEON XR-3535L is 100mA x the number of parallel LED strings. A LUXEON XR-3535L configuration with
3 parallel strings has a nominal drive current of 300mA.
The LEDs on LUXEON XR-3535L are tested and specified individually at a junction temperature of 25°C with a drive current of
100mA and pulse duration of 20ms. The minimum, typical, and maximum performance numbers for LUXEON XR-3535L in this
datasheet are derived from the individual LED measurements. The confidence level on all minimum and maximum performance
parameters in this datasheet is 99% to within individual LED tolerance.
Part Number Nomenclature
Part numbers for LUXEON XR-3535L follow the convention below:
L 2 0 2 – A A B B 0 3 3 C 3 0 0 0 D
Where:
AA
-
designates nominal ANSI CCT (27=2700K, 30=3000K, etc…)
BB
-
designates minimum CRI (80=80CRI)
D
-
designates connector brand/type (0=Molex, snap-together and 1=WAGO, pushbutton)
Therefore, a LUXEON XR-3535L 3000K 80CRI with a WAGO connector will have the following part number:
L 2 0 2–3 0 8 0 0 3 3 C 3 0 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON LEDs are
compliant to the European Union directives on the restriction of hazardous substances in electronics equipment, namely the
RoHS directive. Lumileds will not intentionally add the following restricted materials to its products: lead, mercury, cadmium,
hexavalent chromium, polybrominated biphyenyls (PBB) or polybrominated diphenyl ethers (PBDE).
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON XR-3535L at 300mA, Tj=25ºC [1].
Nominal
CCT
Minimum
CRI [2]
3000K
80
Luminous Flux [3] (lm)
Minimum
Typical
1320
1403
Typical Luminous
Efficacy (lm/W)
Part Number [4]
142
L202 - 3080033C3000x
3500K
80
1386
1469
148
L202 - 3580033C3000x
4000K
80
1419
1502
152
L202 - 4080033C3000x
5000K
80
1419
1502
152
L202 - 5080033C3000x
Notes for Table 1:
1. Nominal current is 100mA x 3 parallel strings = 300 mA.
2. Lumileds maintains a tolerance of ±2 on CRI measurements.
3. Lumileds maintains a tolerance of ±7.5% on flux measurements.
4. “x” is an attribute used to designate connector brand/type. See Part Number Nomenclature.
Electrical and Thermal Characteristics
Table 2. Electrical and thermal characteristics for LUXEON XR-3535L at 100mA, Tj=25ºC.
Part Number [6]
L202 – xxxx033C3000x
Forward Voltage (Vf) [1]
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage (mV/°C) [2]
31.9
33
34.1
–16.5
Typical Thermal Resistance
Junction to Solder Pad (°C/W) [3, 4, 5]
RθS-B
RθJ-C
RθJ-S
0.61
1.2
0.55
Notes for Table 2:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements for LUXEON 3535L LEDs.
2. Measured between 25°C and 85°C for coefficient of forward voltage.
3. RθJ-S specified from LED junction to temperature measurement point (Ts) next to LED. See Application Brief AB203 for details.
4. RθS-B specified from temperature measurement point (Ts) next to LED, to bottom of PCB (heat sink).
5. RθJ-C specified from LED junction to TC (thermal contact point) on top of PCB.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
3
Absolute Maximum Ratings
Table 3. Absolute maximum ratings for LUXEON XR-3535L.
Maximum Performance
Parameter
DC Forward Current
[1]
Peak Pulsed Forward Current
[2]
L202 – xxxx033C30000
L202 – xxxx033C30001
425mA
600mA
545mA
720mA
LED Junction Temperature [3] (DC & Pulse)
125°C
ESD Sensitivity [4]
IEC 61000-4-2 Level 4 (8/15 kV contact/air discharge)
Operating Case Temperature
Storage Temperature
–40°C to 85°C
[5]
<30°C, <80%RH, ≤1 year
CEM3 Substrate [6]
130°C
Reverse Voltage (Vreverse) [7, 8]
–5V x Number of series LEDs
UL Recognition [9]
UL recognized for Class 2 drivers.
Substrate and white reflective coating UL94 V0 flammability rated
Notes for Table 3:
1. Ripple current with a frequency of 50-150Hz is allowed, as long as the average of the current waveform is below 200mA/LED, and the maximum of the current waveform is lower than
240mA/LED.
2. At 10% duty cycle and pulse width 10ms.
3. Proper current de-rating must be observed to maintain junction temperature below the maximum.
4. It is recommended that the LUXEON XR-3535L always be handled/assembled in an ESD safe environment. Handle board around edges and avoid touching the LEDs or exposed
metals directly.
5. TC thermal contact point on top of PCB.
6. As per UL746 rating.
7. LUXEON 3535L LEDs are not designed to be driven in reverse bias
8. At maximum reverse current of 10μA/LED.
9. UL Efile number: E335118.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
4
Characteristic Curves
LED Spectral Distribution Characteristics
Figure 1: Typical normalized power vs. wavelength for LUXEON 3535L LEDs at 100mA, Tj=25ºC.
Radiation Pattern Characteristics
400
Candela per kilo-lumen (cd/klm)
350
300
250
200
150
100
50
0
-90
-70
-50
-30
-10
10
30
50
70
90
Angle (degrees)
Figure 2: Typical radiation pattern for L202 - xxxx033C3000x at 300mA, Tj=25ºC.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
5
Color Bin Definition
Figure 3: 3-step MacAdam ellipse illustration for Table 4.
Table 4. 3-step MacAdam ellipse color bin definitions for LUXEON XR-3535L.
Nominal CCT
Color Space
Center Point
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.2°
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.0°
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.7°
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.6°
Notes for Table 4:
1. Lumileds maintains a tolerance of ± 0.01 on x and y color coordinates in the CIE 1931 color space.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
6
Mechanical Dimensions
Figure 4: Mechanical dimensions for L202 – xxxx033C30000, outline, screw hole and LED pitch.
Figure 5: Mechanical dimensions for L202 – xxxx033C30000, component locations.
Figure 6: Mechanical dimensions for L202 – xxxx033C30000, component profiles.
Notes for Figures 4, 5 and 6:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
7
Top View
Side View
Figure 7: Mechanical dimensions for Molex (snap-together) connectors for L202 – xxxx033C30000.
Notes for Figure 7:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Mates with: Molex 503469-xxxx OR 503473-xxxx.
Figure 8: Electrical circuit diagram for L202 - xxxx033C30000.
Notes for Figure 8:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Table 5. Bill of materials for L202 – xxxx033C3000.
Number
Component Description
Quantity
1
LED: LUXEON 3535L
33
2
Connector: Molex 503471-0290
2
3
Fuse: 125V max, 630mA
1
4
Capacitor: 100nF, X7R, 0603, 50V
13
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
8
Figure 9: Mechanical dimensions for L202 – xxxx033C30001, outline, screw hole and LED pitch.
Figure 10: Mechanical dimensions for L202 – xxxx033C30001, component locations.
Figure 11: Mechanical dimensions for L202 – xxxx033C30001, component profiles.
Notes for Figures 9, 10 and 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
9
Figure 12: Mechanical dimensions for WAGO (pushbutton) connectors for L202 – xxxx033C30001.
Figure 13: Electrical circuit diagram for L202 – xxxx033C30001.
Notes for Figures 12 and 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Table 6. Bill of materials for L202 – xxxx033C30001.
Number
Component Description
Quantity
1
LED: LUXEON 3535L
33
2
Connector: WAGO 2060-402/998-404
2
3
Diode: 400W, SOD123W
2
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
10
Packaging Information
Tray Dimensions
Figure 14: Tray dimensions for LUXEON XR-3535L.
Notes for Figure 14:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. Height with PCB inside is 56.7 ±1.0mm.
4. Each tray fits 44 boards placed back to back.
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
11
Assembly Precautions
The LUXEON 3535L emitter package contains a silicone overcoat to protect the LED chip and extract the maximum amount
of light. As with most silicones used in LED optics, care must be taken to prevent any incompatible chemicals from directly or
indirectly reacting with the silicone.
The silicone overcoat used in the LUXEON emitter is gas permeable. Consequently, oxygen and volatile organic compound
(VOC) gas molecules can diffuse into the silicone overcoat. VOCs may originate from adhesives, solder fluxes, conformal coating
materials, potting materials and even some of the inks that are used to print the PCBs.
Some VOCs and chemicals react with silicone and produce discoloration and surface damage. Other VOCs do not chemically
react with the silicone material directly but diffuse into the silicone and oxidize during the presence of heat or light. Regardless of
the physical mechanism, both cases may affect the total LED light output. Since silicone permeability increases with temperature,
more VOCs may diffuse into and/or evaporate out from the silicone.
Please refer to Application Brief AB203 for more details on VOCs and other incompatible chemicals.
It is recommended that LUXEON XR-3535L always be handled/assembled in an ESD safe environment. Handle board around
edges and avoid touching LEDs or exposed metals directly. LUXEON XF-3535L is designed for operation within maximum
boundaries as described in this datasheet. Operation outside of maximum ratings may result in LED failure and induce light
output loss or uncontrolled failure modes. If multiple products are connected in parallel, failure of one module may result in
excessive current in remaining modules. Make sure wires are connected in the correct polarity and use only recommended wire
gauge (18-24 AWG).
Zhaga Compliance
Table 7. Zhaga compliance information for LUXEON XR-3535L.
Designation of the ECG housing (book-1 / annex C)
NA
Designation of the Book-7 LLE category
L28W6
Luminous Flux Category at tp,max
C020
CCT category at tp,max
3000, 3500, 4000, 5000 K
CRI at tp,max
80
CCT/CRI codes per IEC 62732
830, 835, 840, 850
Position of temperature measurement point tp
Same as Tc point
Value of tp,max
85°C
Value of tp, headroom
30°C
Number of LED modules in LLE
1
DS145 LUXEON XR-3535L Product Datasheet 20151022 ©2015 Lumileds Holding B.V. All rights reserved.
12
About Lumileds
Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking
LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.
With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by
maintaining an unwavering focus on quality, innovation and reliability.
To learn more about our portfolio of light engines, visit lumileds.com.
©2015 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds Holding B.V.
in the United States and other countries.
lumileds.com
DS145 LUXEON XR-3535L
Product Datasheet 20151022
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or
any other damages, direct, indirect or consequential, resulting from the use of the provided
information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to
provide the most accurate information and data, the materials and services information and data
are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees
the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer
and user agreement with the download or use of the provided materials, information and data.
Similar pages