TDK B4373B5278M0 Capacitors with screw terminal Datasheet

Aluminum electrolytic capacitors
Capacitors with screw terminals
Series/Type:
B43713, B43733
Date:
October 2015
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Capacitors with screw terminals
B43713, B43733
Extra long useful life 85 °C
Long-life grade capacitors
Applications
Frequency converters
Wind power converters
Solar inverters
Professional power supplies
Uninterruptible power supplies
Features
High ripple current capability
Extra long useful life
High reliability
Extremely good electrical characteristics and small dimensions
All-welded construction ensures reliable electrical contact
PAPR terminals available (Protection Against Polarity Reversal)
Version available with an optimized base cooling design (heat
sink mounting) and featuring up to 2times the ripple current
capability
Self-extinguishing electrolyte
RoHS-compatible
Construction
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud are not insulated
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 25
B43713
B43733
B43713, B43733
Extra long useful life 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
Dissipation factor tan δ
(20 °C, 120 Hz)
200 ... 500 V DC
1.15 VR (for VR ≤ 250 V DC)
1.10 VR (for VR ≥ 350 V DC)
820 ... 33000 µF
±20% M
≤ 0.20
Leakage current Ileak
(20 °C, 5 min)
Self-inductance ESL
d = 51.6 mm: approx. 15 nH
d ≥ 64.3 mm: approx. 20 nH
Useful life1)
85 °C; VR; IAC,R
200 ... 450 V 500 V
> 15000 h
> 12000 h
Voltage endurance test
85 °C; VR
2000 h
Requirements:
∆C/C ≤ 15% of initial value
tan δ
≤ 1.75 times initial specified limit
Ileak
≤ initial specified limit
Post test requirements:
∆C/C ≤ 10% of initial value
tan δ
≤ 1.3 times initial specified limit
Ileak
≤ initial specified limit
Vibration resistance test To IEC 60068-2-6, test Fc:
Frequency range 10 ... 55 Hz, displacement amplitude 0.75 mm,
acceleration max. 10 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Max. impedance
Characteristics at low
VR
≤ 250 V
≥ 350 V
ratio at 100 Hz
temperature
Z -25°C / Z 20°C
5
4
Z -40°C / Z 20°C 20
16
IEC climatic category
To IEC 60068-1:
25/085/56 (25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
40 °C to +85 °C but the impedance at 40 °C should be taken into
consideration.
Detail specification
Sectional specification
Similar to CECC 30301-803, CECC 30301-807
IEC 60384-4
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 25
B43713, B43733
Extra long useful life 85 °C
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
51.6 mm
64.3 mm
76.9 mm
90 mm
IAC,max
34 A
57 A
67 A
80 A
Dimensional drawings
B43713
Ring clip/clamp mounting
B43733
Threaded stud mounting
For types with threaded stud the base is not insulated. Also refer to the mounting instructions in
chapter "Capacitors with screw terminals Accessories".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 25
B43713, B43733
Extra long useful life 85 °C
Dimensions and weights (Standard capacitors, without heat sink)
Terminal
Dimensions (mm) with insulating sleeve
d
l ±1
l1 ± 1
l2 +0/1 d1
d2 max. a +0.2/0.4
Approx.
weight (g)
M5
M5
M5
M5
M5
51.6 +0.5/1
51.6 +0.5/1
51.6 +0.5/1
51.6 +0.5/1
51.6 +0.5/1
80.7
96.7
105.7
118.2
130.7
87.2
103.2
112.2
124.7
137.2
17
17
17
17
17
M12
M12
M12
M12
M12
10.2
10.2
10.2
10.2
10.2
22.2
22.2
22.2
22.2
22.2
220
250
280
320
350
M5
M5
M5
M5
M5
M5
64.3 +0.5/1
64.3 +0.5/1
64.3 +0.5/1
64.3 +0.5/1
64.3 +0.5/1
64.3 +0.5/1
80.7
96.7
105.7
118.2
130.7
143.2
87.2
103.2
112.2
124.7
137.2
149.7
17
17
17
17
17
17
M12
M12
M12
M12
M12
M12
13.2
13.2
13.2
13.2
13.2
13.2
28.5
28.5
28.5
28.5
28.5
28.5
370
400
440
510
600
630
M6
M6
M6
M6
M6
M6
M6
M6
M6
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
96.7
105.7
118.2
130.7
143.2
156.2
168.7
190.7
220.7
102.5
111.5
124.0
136.5
149.0
162.0
174.5
196.5
226.5
17
17
17
17
17
17
17
17
17
M12
M12
M12
M12
M12
M12
M12
M12
M12
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
17.7
31.7
31.7
31.7
31.7
31.7
31.7
31.7
31.7
31.7
570
620
700
800
840
920
1000
1150
1300
M6
M6
M6
M6
M6
90.0 +0.5/1.5
90.0 +0.5/1.5
90.0 +0.5/1.5
90.0 +0.5/1.5
90.0 +0.5/1.5
120.2
144.5
170.0
197.0
221.0
125.3
149.8
175.3
202.3
226.3
17
17
17
17
17
M12
M12
M12
M12
M12
17.7
17.7
17.7
17.7
17.7
31.7
31.7
31.7
31.7
31.7
1000
1200
1400
1700
1900
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 25
B43713, B43733
Extra long useful life 85 °C
Packing
Capacitor
diameter d (mm)
51.6
64.3
length l
(mm)
all
all
Packing units
(pcs.)
36
25
Capacitor
diameter d (mm)
76.9
90.0
For ecological reasons the packing is pure cardboard.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 25
length l
(mm)
≤168.7
>168.7
all
Packing units
(pcs.)
16
12
9
B43713, B43733
Extra long useful life 85 °C
Special designs
PAPR terminal style
With our PAPR terminal style (Protection Against Polarity Reversal) we offer an optional
mechanical feature in addition to the visual polarity marking on the cover disk and the sleeve,
which prevents from mounting in reverse polarity. The non-circular shape of the terminals and
their arrangement perpendicular to each other enables the user to definitely prevent wrong
mounting with respect to polarity (Poka Yoke).
Dimensional drawing of PAPR terminal configuration
Dimensions for PAPR terminal style (mm)
Can diameter d Terminal
d3 ±0.1
d4 ±0.1
a +0.2/0.4
Min. reach of screw
Standard
For heat sink
design
mounting
#050
#057
51.6
M5
10
13
22.2
9.5
64.3
M5
13
15
28.5
9.5
7.3
76.9
M6
13
15
31.7
12.0
9.7
90.0
M6
13
15
31.7
12.0
9.7
All other dimensions of the capacitor such as diameter d, case length l and overall length l1 are
identical with those of standard capacitors of this series. Please refer to the tables "Dimensions
and weights" (standard types) and "Dimensions and weights for heat sink mounting" (special
designs).
For heat sink mounting
Please refer to chapter "General technical information, 5.2.2 Base cooling with heat sink". This
version is available only for capacitors without threaded stud and for diameters ≥ 64.3 mm.
Regarding ripple current and useful life, please refer to chapter "General technical information,
5 Useful life".
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 25
B43713, B43733
Extra long useful life 85 °C
Dimensions and weights for heat sink mounting:
Terminal
Dimensions (mm) with insulating sleeve
d
l ±1
l1 ±0.35
d2 max.
a +0.2/0.4
Approx. weight
g
M5
M5
M5
64.3 +0.5/1
64.3 +0.5/1
64.3 +0.5/1
80.7
96.7
105.7
86.3
102.3
111.3
13.2
13.2
13.2
28.5
28.5
28.5
370
400
440
M6
M6
M6
76.9 +0.5/1
76.9 +0.5/1
76.9 +0.5/1
96.7
105.7
118.2
101.6
110.6
123.1
17.7
17.7
17.7
31.7
31.7
31.7
570
620
700
M6
M6
90.0 +0.5/1.5
90.0 +0.5/1.5
120.0
144.5
124.4
148.9
17.7
17.7
31.7
31.7
1000
1200
Dimensions for other sizes are available upon request.
Ordering codes:
Design
Identification in third
Remark
block of ordering code
For heat sink mounting
M007
PAPR terminal style
M050
PAPR terminal style and
heat sink mounting
M057
Please read Cautions and warnings and
Important notes at the end of this document.
For capacitors with diameter d ≥ 64.3 mm and
without threaded stud
For capacitors with diameter d ≥ 64.3 mm and
without threaded stud
Page 8 of 25
B43713, B43733
Extra long useful life 85 °C
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
For terminals
Thread Toothed
washers
Screws/nuts
Maximum
torque
M5
A 5.1 DIN 6797
DIN 7985 / ISO 7045-M5 × 10-5.6-Z
2.5 Nm
thread depth
t ≥ 8 mm
M6
A 6.4 DIN 6797
DIN 7985 / ISO 7045-M6 × 12-5.6-Z
4.0 Nm
thread depth
t ≥ 9.5 mm
For mounting M12
J 12.5 DIN 6797 Hex nut BM 12 DIN 439
10 Nm
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals Accessories".
Item
Type
Ring clips
B44030
Clamps for capacitors with d ≥ 64.3 mm
B44030
Insulating parts
B44020
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 25
B43713, B43733
Extra long useful life 85 °C
Overview of available types
VR (V DC)
200
250
350
400
450
500
Case dimensions d × l (mm)
CR (µF)
820
51.6 × 80.7
1000
51.6 × 80.7 51.6 × 96.7
1200
51.6 × 96.7 51.6 × 105.7
64.3 × 80.7
1500
51.6 × 80.7 51.6 × 80.7 51.6 × 105.7 51.6 × 130.7
64.3 × 80.7 64.3 × 96.7
1800
51.6 × 96.7 51.6 × 96.7 51.6 × 130.7 64.3 × 105.7
64.3 × 96.7
2200
51.6 × 105.7 51.6 × 105.7 64.3 × 105.7 64.3 × 118.2
64.3 × 80.7 64.3 × 80.7
76.9 × 96.7
2700
51.6 × 80.7 51.6 × 118.2 51.6 × 118.2 64.3 × 118.2 64.3 × 143.2
64.3 × 80.7 64.3 × 80.7 76.9 × 96.7 76.9 × 105.7
3300
51.6 × 80.7 51.6 × 80.7 64.3 × 96.7 64.3 × 96.7 64.3 × 143.2 76.9 × 130.7
76.9 × 105.7
3900
51.6 × 96.7 51.6 × 105.7 64.3 × 105.7 64.3 × 105.7 76.9 × 118.2 76.9 × 143.2
64.3 × 80.7 76.9 × 96.7 76.9 × 96.7
4700
51.6 × 105.7 51.6 × 130.7 64.3 × 130.7 64.3 × 130.7 76.9 × 143.2 90.0 × 144.5
64.3 × 80.7 64.3 × 96.7 76.9 × 96.7 76.9 × 96.7 90.0 × 120.0
5600
51.6 × 118.2 64.3 × 96.7 64.3 × 143.2 64.3 × 143.2 76.9 × 156.2
64.3 × 96.7
76.9 × 118.2 76.9 × 118.2 90.0 × 144.5
6800
64.3 × 96.7 64.3 × 118.2 76.9 × 130.7 76.9 × 130.7 76.9 × 190.7
76.9 × 96.7 90.0 × 120.0 90.0 × 120.0 90.0 × 170.0
8200
64.3 × 118.2 64.3 × 130.7 76.9 × 156.2 76.9 × 168.7 76.9 × 220.7
76.9 × 96.7 76.9 × 105.7 90.0 × 120.0 90.0 × 120.0 90.0 × 170.0
10000
64.3 × 130.7 76.9 × 118.2 76.9 × 168.7 76.9 × 220.7 90.0 × 221.0
76.9 × 105.7 90.0 × 120.0 90.0 × 144.5 90.0 × 144.5
12000
76.9 × 118.2 76.9 × 143.2 76.9 × 220.7 90.0 × 197.0
90.0 × 120.0
15000
76.9 × 143.2 76.9 × 168.7 90.0 × 197.0 90.0 × 221.0
90.0 × 120.0 90.0 × 144.5
18000
76.9 × 156.2 76.9 × 190.7 90.0 × 221.0
90.0 × 144.5 90.0 × 170.0
22000
76.9 × 190.7 76.9 × 220.7
90.0 × 170.0 90.0 × 197.0
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 25
B43713, B43733
Extra long useful life 85 °C
VR (V DC)
200
250
350
400
450
500
Case dimensions d × l (mm)
CR (µF)
27000
76.9 × 220.7 90.0 × 221.0
90.0 × 197.0
33000
90.0 × 221.0
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 200 V DC
3300
51.6 × 80.7
3900
51.6 × 96.7
4700
51.6 × 105.7
4700
64.3 × 80.7
5600
51.6 × 118.2
5600
64.3 × 96.7
6800
64.3 × 96.7
8200
64.3 × 118.2
8200
76.9 × 96.7
10000
64.3 × 130.7
10000
76.9 × 105.7
12000
76.9 × 118.2
15000
76.9 × 143.2
15000
90.0 × 120.0
18000
76.9 × 156.2
18000
90.0 × 144.5
22000
76.9 × 190.7
22000
90.0 × 170.0
27000
76.9 × 220.7
27000
90.0 × 197.0
33000
90.0 × 221.0
ESRtyp
100 Hz
20 °C
mΩ
50
40
36
36
30
30
26
20
20
17
17
14
11
11
9.5
9.2
7.8
7.6
6.4
6.2
5.2
ESRtyp
300 Hz
60 °C
mΩ
15
12
11
10
9.1
8.3
7.7
6.2
5.6
5.5
4.8
4.1
3.4
3.2
3.0
2.7
2.5
2.2
2.1
1.9
1.7
85
70
60
60
50
50
45
34
34
30
28
24
19
19
17
16
14
14
12
12
9.8
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
15.8
17.9
20.1
21.0
22.5
23.6
25.8
29.6
33.1
33.2
36.9
41.2
47.6
51.0
53.1
57.1
61.0
64.4
67.0
72.8
80.0
8.59
9.78
10.9
11.4
12.2
12.9
14.0
16.0
18.0
18.0
20.0
22.3
25.8
28.4
28.8
31.8
33.9
35.9
39.0
40.6
45.9
B437*3A2338M0##
B437*3A2398M0##
B437*3A2478M0##
B437*3B2478M0##
B437*3A2568M0##
B437*3B2568M0##
B437*3A2688M0##
B437*3A2828M0##
B437*3B2828M0##
B437*3A2109M0##
B437*3B2109M0##
B437*3A2129M0##
B437*3A2159M0##
B437*3B2159M0##
B437*3A2189M0##
B437*3B2189M0##
B437*3A2229M0##
B437*3B2229M0##
B437*3A2279M0##
B437*3B2279M0##
B437*3A2339M0##
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 12 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 250 V DC
2700
51.6 × 80.7
3300
51.6 × 80.7
3900
51.6 × 105.7
3900
64.3 × 80.7
4700
51.6 × 130.7
4700
64.3 × 96.7
5600
64.3 × 96.7
6800
64.3 × 118.2
6800
76.9 × 96.7
8200
64.3 × 130.7
8200
76.9 × 105.7
10000
76.9 × 118.2
10000
90.0 × 120.0
12000
76.9 × 143.2
12000
90.0 × 120.0
15000
76.9 × 168.7
15000
90.0 × 144.5
18000
76.9 × 190.7
18000
90.0 × 170.0
22000
76.9 × 220.7
22000
90.0 × 197.0
27000
90.0 × 221.0
ESRtyp
100 Hz
20 °C
mΩ
55
50
36
34
28
28
24
20
20
17
17
14
13
11
11
9.2
9.0
7.8
7.6
6.4
6.2
5.2
ESRtyp
300 Hz
60 °C
mΩ
16
15
11
10
8.7
8.5
8.0
6.4
5.7
5.7
5.0
4.2
3.6
3.5
3.4
2.9
2.7
2.6
2.3
2.2
2.0
1.7
95
80
55
55
50
45
40
34
32
28
28
22
22
19
19
16
15
14
13
12
11
9.4
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
13.6
14.8
18.2
18.9
21.1
21.4
23.2
26.8
29.8
30.1
33.1
37.3
41.2
42.3
45.3
49.0
51.8
55.4
58.0
63.8
65.6
74.7
7.28
7.88
9.69
10.0
11.2
11.4
12.3
14.2
15.8
16.0
17.6
19.9
22.5
22.5
24.7
26.7
28.3
30.2
31.7
34.8
35.9
40.8
B437*3E2278M0##
B437*3E2338M0##
B437*3E2398M0##
B437*3F2398M0##
B437*3E2478M0##
B437*3F2478M0##
B437*3E2568M0##
B437*3E2688M0##
B437*3F2688M0##
B437*3E2828M0##
B437*3F2828M0##
B437*3E2109M0##
B437*3F2109M0##
B437*3E2129M0##
B437*3F2129M0##
B437*3E2159M0##
B437*3F2159M0##
B437*3E2189M0##
B437*3F2189M0##
B437*3E2229M0##
B437*3F2229M0##
B437*3E2279M0##
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 13 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 350 V DC
1500
51.6 × 80.7
1800
51.6 × 96.7
2200
51.6 × 105.7
2200
64.3 × 80.7
2700
51.6 × 118.2
2700
64.3 × 80.7
3300
64.3 × 96.7
3900
64.3 × 105.7
3900
76.9 × 96.7
4700
64.3 × 130.7
4700
76.9 × 96.7
5600
64.3 × 143.2
5600
76.9 × 118.2
6800
76.9 × 130.7
6800
90.0 × 120.0
8200
76.9 × 156.2
8200
90.0 × 120.0
10000
76.9 × 168.7
10000
90.0 × 144.5
12000
76.9 × 220.7
15000
90.0 × 197.0
18000
90.0 × 221.0
ESRtyp
100 Hz
20 °C
mΩ
80
65
55
55
45
45
38
32
30
26
26
22
22
18
18
16
15
13
12
11
8.6
7.2
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
22
18
15
15
13
13
11
9.4
8.1
7.6
7.3
6.7
5.9
5.1
4.7
4.2
4.2
3.7
3.5
3.0
2.5
2.2
130
110
90
90
75
75
60
55
50
45
45
36
36
30
30
26
24
22
20
18
15
13
11.8
13.4
15.2
15.9
17.5
17.6
20.2
22.5
25.1
25.7
27.8
28.8
31.3
35.3
38.0
39.4
42.2
45.0
47.7
51.1
60.9
68.8
6.44
7.33
8.32
8.67
9.52
9.59
11.0
12.2
13.6
13.9
15.1
15.6
17.0
19.1
21.2
21.5
23.5
25.0
26.6
28.5
34.0
38.3
B437*3A4158M0##
B437*3A4188M0##
B437*3A4228M0##
B437*3B4228M0##
B437*3A4278M0##
B437*3B4278M0##
B437*3A4338M0##
B437*3A4398M0##
B437*3B4398M0##
B437*3A4478M0##
B437*3B4478M0##
B437*3A4568M0##
B437*3B4568M0##
B437*3A4688M0##
B437*3B4688M0##
B437*3A4828M0##
B437*3B4828M0##
B437*3A4109M0##
B437*3B4109M0##
B437*3A4129M0##
B437*3A4159M0##
B437*3A4189M0##
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 14 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 400 V DC
1500
51.6 × 80.7
1800
51.6 × 96.7
2200
51.6 × 105.7
2200
64.3 × 80.7
2700
51.6 × 118.2
2700
64.3 × 80.7
3300
64.3 × 96.7
3900
64.3 × 105.7
3900
76.9 × 96.7
4700
64.3 × 130.7
4700
76.9 × 96.7
5600
64.3 × 143.2
5600
76.9 × 118.2
6800
76.9 × 130.7
6800
90.0 × 120.0
8200
76.9 × 168.7
8200
90.0 × 120.0
10000
76.9 × 220.7
10000
90.0 × 144.5
12000
90.0 × 197.0
15000
90.0 × 221.0
ESRtyp
100 Hz
20 °C
mΩ
85
70
55
55
45
45
38
32
32
28
26
24
22
19
18
14
15
11
13
9.5
7.7
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
22
18
15
15
13
14
11
9.7
8.3
7.8
7.5
6.9
6.1
5.2
4.8
4.0
4.4
3.2
3.6
2.7
2.3
130
110
90
90
75
75
65
55
50
45
45
38
36
30
30
22
26
18
22
16
13
11.8
13.4
15.3
15.9
17.5
17.6
20.2
22.5
25.1
25.8
27.9
29.0
31.3
35.4
38.1
42.4
42.3
48.7
48.0
56.4
65.8
6.44
7.33
8.34
8.66
9.55
9.59
11.0
12.2
13.6
14.0
15.1
15.7
17.0
19.2
21.2
23.6
23.5
27.1
26.7
31.4
36.6
B437*3A9158M0##
B437*3A9188M0##
B437*3A9228M0##
B437*3B9228M0##
B437*3A9278M0##
B437*3B9278M0##
B437*3A9338M0##
B437*3A9398M0##
B437*3B9398M0##
B437*3A9478M0##
B437*3B9478M0##
B437*3A9568M0##
B437*3B9568M0##
B437*3A9688M0##
B437*3B9688M0##
B437*3A9828M0##
B437*3B9828M0##
B437*3A9109M0##
B437*3B9109M0##
B437*3A9129M0##
B437*3A9159M0##
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 15 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 450 V DC
1000
51.6 × 80.7
1200
51.6 × 96.7
1500
51.6 × 105.7
1500
64.3 × 80.7
1800
51.6 × 130.7
1800
64.3 × 96.7
2200
64.3 × 105.7
2700
64.3 × 118.2
2700
76.9 × 96.7
3300
64.3 × 143.2
3300
76.9 × 105.7
3900
76.9 × 118.2
4700
76.9 × 143.2
4700
90.0 × 120.0
5600
76.9 × 156.2
5600
90.0 × 144.5
6800
76.9 × 190.7
6800
90.0 × 170.0
8200
76.9 × 220.7
8200
90.0 × 170.0
10000
90.0 × 221.0
ESRtyp
100 Hz
20 °C
mΩ
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
120
100
80
80
65
65
55
45
45
36
36
30
26
26
22
22
18
17
15
15
12
28
24
20
19
16
16
14
11
11
9.3
9.0
7.7
6.4
6.2
5.5
5.2
4.6
4.4
3.9
3.8
3.1
190
160
130
130
110
110
85
70
70
60
60
50
40
40
34
34
28
28
24
24
20
9.62
10.8
12.6
13.1
14.4
14.7
16.7
19.1
20.8
21.9
23.5
26.1
29.4
31.4
33.1
34.6
37.8
39.0
43.2
44.4
50.2
5.29
5.99
6.95
7.20
7.95
8.10
9.20
10.5
11.4
12.0
12.9
14.3
16.2
17.6
18.2
19.5
21.3
22.0
24.4
25.0
28.3
B437*3A5108M0##
B437*3A5128M0##
B437*3A5158M0##
B437*3B5158M0##
B437*3A5188M0##
B437*3B5188M0##
B437*3A5228M0##
B437*3A5278M0##
B437*3B5278M0##
B437*3A5338M0##
B437*3B5338M0##
B437*3A5398M0##
B437*3A5478M0##
B437*3B5478M0##
B437*3A5568M0##
B437*3B5568M0##
B437*3A5688M0##
B437*3B5688M0##
B437*3A5828M0##
B437*3B5828M0##
B437*3A5109M0##
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 16 of 25
B43713, B43733
Extra long useful life 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 500 V DC
820
51.6 × 80.7
1000
51.6 × 96.7
1200
51.6 × 105.7
1200
64.3 × 80.7
1500
51.6 × 130.7
1500
64.3 × 96.7
1800
64.3 × 105.7
2200
64.3 × 118.2
2200
76.9 × 96.7
2700
64.3 × 143.2
2700
76.9 × 105.7
3300
76.9 × 130.7
3900
76.9 × 143.2
4700
90.0 × 144.5
ESRtyp
100 Hz
20 °C
mΩ
ESRtyp
300 Hz
60 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
130
100
85
85
70
70
60
50
45
38
38
32
26
22
32
26
22
22
18
17
15
12
12
10
9.8
7.9
6.8
5.6
200
160
140
140
110
110
90
75
75
60
60
50
45
34
9.20
10.4
11.8
12.3
13.9
14.1
15.9
18.2
19.8
20.9
22.5
25.4
28.3
33.6
4.68
5.35
6.05
6.28
7.10
7.23
8.13
9.28
10.0
10.6
11.4
12.9
14.4
17.5
B437*3A6827M0##
B437*3A6108M0##
B437*3A6128M0##
B437*3B6128M0##
B437*3A6158M0##
B437*3B6158M0##
B437*3A6188M0##
B437*3A6228M0##
B437*3B6228M0##
B437*3A6278M0##
B437*3B6278M0##
B437*3A6338M0##
B437*3A6398M0##
B437*3A6478M0##
Composition of ordering code
* = Mounting style
1 = for capacitors with ring clip/clamp mounting
3 = for capacitors with threaded stud
Please read Cautions and warnings and
Important notes at the end of this document.
## = Design
00 = for standard capacitors
07 = for heat sink mounting (only for d ≥ 64.3 mm
and without threaded stud)
50 = for terminals with PAPR style
57 = for terminals with PAPR style and heat sink
mounting (only for d ≥ 64.3 mm and without
threaded stud)
Page 17 of 25
B43713, B43733
Extra long useful life 85 °C
Useful life1)
For useful life calculations, please use our web-based "AlCap Useful Life Calculation Tool", which
can be found on the Internet under the following link
http://www.epcos.com/designtools/alu_useful_life/Useful_life.swf.
The AlCap Useful Life Calculation Tool provides calculations of useful life as well as additional
data for selected capacitor types under operating conditions defined by the user.
Frequency characteristics of ESR
Typical behavior
Impedance Z versus frequency f
Typical behavior at 20 °C
1) Refer to chapter "General technical information, 5 Useful life" on how to interpret useful life.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 25
B43713, B43733
Extra long useful life 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have been optimized both with a view to the intended
application and with regard to health and environmental compatibility. They do not contain any
solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, some of the high-voltage electrolytes used by EPCOS are self-extinguishing.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no alternative materials are currently
known. However, the amount of dangerous materials used in our products is limited to an
absolute minimum.
Materials and chemicals used in EPCOS aluminum electrolytic capacitors are continuously
adapted in compliance with the EPCOS Corporate Environmental Policy and the latest EU
regulations and guidelines such as RoHS, REACH/SVHC, GADSL, and ELV.
MDS (Material Data Sheets) are available on the EPCOS website for all types listed in the data
book. MDS for customer specific capacitors are available upon request.
MSDS (Material Safety Data Sheets) are available for all of our electrolytes upon request.
Nevertheless, the following rules should be observed when handling aluminum electrolytic
capacitors: No electrolyte should come into contact with eyes or skin. If electrolyte does come
into contact with the skin, wash the affected areas immediately with running water. If the eyes are
affected, rinse them for 10 minutes with plenty of water. If symptoms persist, seek medical
treatment. Avoid inhaling electrolyte vapor or mists. Workplaces and other affected areas should
be well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 25
B43713, B43733
Extra long useful life 85 °C
Product safety
The table below summarizes the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Polarity
Reverse voltage
Mounting
position of screwterminal capacitors
Robustness of
terminals
Mounting of
single-ended
capacitors
Soldering
Soldering,
cleaning agents
Upper category
temperature
Passive
flammability
Safety information
Reference
chapter "General
technical information"
Make sure that polar capacitors are connected
1
with the right polarity.
"Basic construction of
aluminum electrolytic
capacitors"
Voltages of opposite polarity should be prevented 3.1.6
by connecting a diode.
"Reverse voltage"
Screw terminal capacitors must not be mounted
11.1.
with terminals facing down unless otherwise
"Mounting positions of
specified.
capacitors with screw
terminals"
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2.5 Nm
M6: 4.0 Nm
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Do not exceed the upper category temperature.
7.2
"Maximum permissible
operating temperature"
Avoid external energy, e.g. fire.
8.1
"Passive flammability"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 25
B43713, B43733
Extra long useful life 85 °C
Topic
Safety information
Active
flammability
Maintenance
Avoid overload of the capacitors.
Storage
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply excessive mechanical stress to the
capacitor terminals when mounting.
Do not store capacitors at high temperatures or
high humidity. Capacitors should be stored at
+5 to +35 °C and a relative humidity of ≤ 75%.
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Reference
chapter "General
technical information"
8.2
"Active flammability"
10
"Maintenance"
7.3
"Shelf life and storage
conditions"
Reference
chapter "Capacitors with
screw terminals"
"Screw terminals accessories"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the specifications of the
respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 25
B43713, B43733
Extra long useful life 85 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,RMS
IAC,f
IAC,max
IAC,R
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Reststrom
Betriebsreststrom
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Gehäusebodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 22 of 25
B43713, B43733
Extra long useful life 85 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Note
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 25
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 24 of 25
Important notes
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,
MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 25 of 25
Similar pages