ON ESD7321MUT5G Esd protection diode Datasheet

ESD7321
ESD Protection Diodes
Low Capacitance ESD Protection Diode
for High Speed Data Lines
The ESD7321 ESD protection diodes are designed to protect high
speed data lines from ESD. Low capacitance and low ESD clamping
voltage make this device an ideal solution for protecting voltage
sensitive high speed data lines.
www.onsemi.com
MARKING
DIAGRAM
Features
• Low Capacitance (0.5 pF Max, I/O to GND)
• Protection for the Following IEC Standards:
IEC 61000−4−2 (Level 4)
Low ESD Clamping Voltage
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
•
•
•
•
X3DFN2
CASE 152AF
T
•
•
PIN 1
M
T = Specific Device Code
(Rotated 90° clockwise)
M = Date Code
PIN CONFIGURATION
AND SCHEMATIC
USB 3.x
MHL 2.0
SATA/SAS
PCI Express
1
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
2
ORDERING INFORMATION
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
−55 to +125
°C
Storage Temperature Range
Tstg
−55 to +150
°C
Lead Solder Temperature −
Maximum (10 Second Duration)
TL
260
°C
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
ESD
ESD
±15
±15
kV
kV
Device
ESD7321MUT5G
Package
Shipping†
X3DFN2
(Pb−Free)
10000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
© Semiconductor Components Industries, LLC, 2016
May, 2016 − Rev. 2
1
Publication Order Number:
ESD7321/D
ESD7321
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
IPP
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
IR VRWM VBR VC
IT
Working Peak Reverse Voltage
V
Maximum Reverse Leakage Current @ VRWM
VBR
IT
IT
VC VBR VRWM IR
Breakdown Voltage @ IT
IPP
Test Current
Bi−Directional ESD
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Parameter
Reverse Working Voltage
Breakdown Voltage
Symbol
Condition
Min
Typ
VRWM
VBR
IT = 1 mA (Note 1)
Max
Unit
7.0
V
8.0
Reverse Leakage Current
IR
VRWM = 7.0 V, I/O to GND
Clamping Voltage
VC
IPP = 8 A − (IEC61000−4−2 Level 2 Equivalent
(±4 kV Contact, ±8 kV Air))
ESD Clamping Voltage
VC
Per IEC 61000−4−2
Junction Capacitance
CJ
VR = 0 V, f = 1 MHz
Dynamic Resistance
RDYN
V
200
18
nA
V
See Figures 1 and 2
0.5
TLP Pulse
1
pF
W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1.
Figure 1. ESD Clamping Voltage Screenshot
Positive 8 kV Contact per IEC61000−4−2
Figure 2. ESD Clamping Voltage Screenshot
Negative 8 kV Contact per IEC61000−4−2
www.onsemi.com
2
ESD7321
TYPICAL CHARACTERISTICS
Figure 4. CV Characteristics
20
0
18
−2
16
−4
14
−6
CURRENT (A)
CURRENT (A)
Figure 3. IV Characteristics
12
10
8
−8
−10
−12
6
−14
4
−16
2
−18
0
0
5
10
15
20
VOLTAGE (V)
25
−20
−30
30
Figure 5. Positive TLP I−V Curve
−25
−20
−15
−10
VOLTAGE (V)
−5
Figure 6. Negative TLP I−V Curve
www.onsemi.com
3
0
ESD7321
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 7. IEC61000−4−2 Spec
Transmission Line Pulse (TLP) Measurement
L
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 8. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 9 where an 8 kV IEC 61000−4−2
current waveform is compared with TLP current pulses at
8 A and 16 A. A TLP I−V curve shows the voltage at which
the device turns on as well as how well the device clamps
voltage over a range of current levels.
S Attenuator
÷
50 W Coax
Cable
10 MW
IM
50 W Coax
Cable
VM
DUT
VC
Oscilloscope
Figure 8. Simplified Schematic of a Typical TLP
System
Figure 9. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
www.onsemi.com
4
ESD7321
PACKAGE DIMENSIONS
X3DFN2, 0.62x0.32, 0.355P, (0201)
CASE 152AF
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A B
D
PIN 1
INDICATOR
(OPTIONAL)
DIM
A
A1
b
D
E
e
L2
E
TOP VIEW
0.05 C
MILLIMETERS
MIN
MAX
0.25
0.33
−−−
0.05
0.22
0.28
0.58
0.66
0.28
0.36
0.355 BSC
0.17
0.23
A
0.05 C
2X
A1
SIDE VIEW
C
RECOMMENDED
MOUNTING FOOTPRINT*
SEATING
PLANE
0.74
e
2X
1
1
b
2
2X
2X
0.05
M
2X
0.30
0.05
L2
M
0.31
C A B
DIMENSIONS: MILLIMETERS
C A B
See Application Note AND8398/D for more mounting details
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
ESD7321/D
Similar pages