ZETTLER AZ764-1A-115A 16 a spdt miniature power relay Datasheet

AZ764
16 A SPDT MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
•
Dielectric strength 5000 Vrms
Low height: 15.7 mm
Epoxy sealed version available
16 Amp switching (High inrush version 80A available)
AC and DC coils
Isolation spacing greater than 10 mm
Proof tracking index (PTI/CTI) 250
Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE certificate 40012572
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
7 x 104 at 16 A 250 VAC res.
Operate Time (typical)
7 ms at nominal coil voltage
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
CONTACTS
Insulation
Resistance
105 megohms min. at 500 VDC,
20°C, 50% RH
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
B250 at 1 Form C, flux proof version
C250 at other relay versions
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout DC coils
AC coils
Ambient Temperature
Operating
Greater than 10% of nominal coil voltage
Greater than 15% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) - DC coils
-40°C (-40°F) to 70°C (158°F) - AC coils
Vibration
Break contacts: 5 g at 20…500 Hz
Make contacts: 20 g at 30…500 Hz
Shock
20 g
Enclosure
P.B.T. polyester, UL-94 : V0
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
1 Form A - AC coil
16 A at 250 VAC, 30k cycles, 70°C [1]
16 A at 250 VAC, 40k cycles, 70°C [2]
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
1 Form C - DC coil
16 A at 250 VAC, 10k cycles, 70°C [1]
16 A at 250 VAC, 10k cylces, 85°C [2]
Max. Immersion Time
30 seconds
Weight
14 grams
Packing unit in pcs
20 per carton tube / 1000 per carton box
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 480 W or 5000 VA
Max. switched current: 16 A
Max. switched voltage: 300 VDC* or 400 VAC
* Note:
Rated Load
UL, CUR
VDE
If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
16 A at 250 VAC, General use [1][2]
1 Form A - DC coil
16 A at 250 VAC, 30k cycles, 85°C [1]
16 A at 250 VAC, 10k cycles, 85°C [2]
20 A at 250 VAC, 10k cycles, 85°C [2] *
* approved with open vent hole only
1 Form C - AC coil
16 A at 250 VAC, 10k cycles, 70°C [1][2]
Material
Silver nickel [1], silver tin oxide [2]
Resistance
< 100 miliohms initially
COIL
Power
At Pickup Voltage
(typical)
200 mW (DC coil)
.422 VA (AC coil)
1. All values at 20°C (68°F).
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient
1.7 VA at 20°C (68°F) ambient
2. Relay may pull in with less than “Must Operate” value.
Temperature Rise
26°C (47°F) at nominal coil voltage
NOTES
3. Specifications subject to change without notice.
Max. Temperature
155°C (311°F) Class F
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2013-02-26
AZ764
RELAY ORDERING DATA
COIL SPECIFICATIONS - DC COIL
Nominal Coil
VDC
Must Operate
VDC
ORDER NUMBER*
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
3
2.1
7.6
22
AZ764–1A–3D
5
3.5
12.7
60
AZ764–1A–5D
AZ764–1C–3D
AZ764–1C–5D
6
4.2
15.3
90
AZ764–1A–6D
AZ764–1C–6D
9
6.3
22.9
200
AZ764–1A–9D
AZ764–1C–9D
12
8.4
30.6
360
AZ764–1A–12D
AZ764–1C–12D
18
12.6
45.9
710
AZ764–1A–18D
AZ764–1C–18D
24
16.8
61.2
1,440
AZ764–1A–24D
AZ764–1C–24D
36
25.2
92.0
3,140
AZ764–1A–36D
AZ764–1C–36D
48
33.6
122.0
5,700
AZ764–1A–48D
AZ764–1C–48D
60
42.0
153.0
7,500
AZ764–1A–60D
AZ764–1C–60D
110
77.0
280.0
25,200
AZ764–1A–110D
AZ764–1C–110D
COIL SPECIFICATIONS - AC COIL
Nominal Coil
VAC
Must Operate
VAC
Max. Continuous
VAC
ORDER NUMBER*
Nominal Current
mA ± 10%
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
12
9.0
18.0
63.0
100
AZ764–1A–12A
AZ764–1C–12A
24
18.0
36.0
31.3
400
AZ764–1A–24A
AZ764–1C–24A
48
36.0
72.0
15.6
1,550
AZ764–1A–48A
AZ764–1C–48A
60
45.0
90.0
12.5
2,600
AZ764–1A–60A
AZ764–1C–60A
110
82.5
165.0
6.8
8,900
AZ764–1A–110A
AZ764–1C–110A
115
86.3
172.5
6.5
9,600
AZ764–1A–115A
AZ764–1C–115A
120
90.0
180.0
6.3
10,200
AZ764–1A–120A
AZ764–1C–120A
220
165.0
330.0
3.4
35,500
AZ764–1A–220A
AZ764–1C–220A
230
172.5
345.0
3.3
38,500
AZ764–1A–230A
AZ764–1C–230A
240
180.0
360.0
3.1
42,500
AZ764–1A–240A
AZ764–1C–240A
* “1A” or “1C” denote silver nickel contacts.
Substitute “1AE” or “1CE” in place of “1A” or “1C” for silver tin oxide contacts.
Substitute “1AT” in place of “1A” for high inrush 80A silver tin oxide contacts. (DC coils only)
Add suffix “E” at the end of order number for sealed version.
AC - Coil operating range
DC - Coil operating range
3,0
3,0
2,8
2,8
2,6
I N = 16 A
2,4
UB / U N
UB / U N
2,6
1
2,2
2
2,0
2,2
2,0
3
1,8
2,4
1,6
1,6
1,4
1,4
1,2
1,2
1,0
0,6
10
20
30
3
40
50
60
70
80
90
100
0,6
Ambient temperature [°C]
A - Cold coil ( Tcoil = Tambient)
B - Hot coil (1,1 x UN), contact load = IN
B
0,8
A
0
1
1,0
B
0,8
I N = 16 A
1,8
1 - no load on contacts
2 - half of rated load on contacts
3 - rated load on contacts
0
10
20
30
40
50
60
70
80
90
100
Ambient temperature [°C]
B - Hot coil (1,1 x UN), contact load = IN
1 - no load on contacts
3 - rated load on contacts
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2013-02-26
AZ764
MECHANICAL DATA
PC BOARD LAYOUT
.197
[5.0]
0.500 Max.
[12.7]
1.142 Max.
[29.0]
.60
[15.12]
.197
[5.0]
.098
[2.5]
*
.295
[7.5]
.618 Max.
[15.7]
*
2 x ø .040
[ø 1.0]
6 x ø .050
[ø 1.3]
* Not used on 1 Form A relay
.295
[7.5]
.154
[3.9]
Viewed toward terminals
WIRING DIAGRAMS
6 x .020
[0.5]
2 x ø .024
[ø 0.6]
1 Form C
.197
[5.0]
.197
[5.0]
.60
[15.12]
4
5
.295
[7.5]
6 x .035
[0.9]
1 Form A
3
2
4
5
2
.098
[2.5]
8
7
6
1
8
7
1
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ACCESSORIES
For P.C.B. mount:
Socket EC 50
Retaining Clip MP 16 / MH 16
For DIN rail mount:
Socket ES 50
Retaining Clip MS 16
MECHANICAL DATA
EC 50
ES 50
MP 16 / MH 16
MS 16
h = 15 ... 16.5 mm
h = 15 ... 16.5 mm
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2013-02-26
AZ764
Electrical life at 250 VAC, resistive load
Electrical life reduction factor at inductive AC load
107
F
1,0
Reduction factor
Number of cycles
0,9
106
0,8
0,7
0,6
0,5
105
0,4
0,3
1,0
0,9
0,8
0,7
0,6
0,5
0,4
0,3
cos j
0,2
Power factor
104
0
0,4
0,8
1,2
1,6
2,0
2,4
2,8
3,2
3,6
4,0
Ncos j = N x F
Breaking capacity [kVA]
Max. DC resistive load breaking capacity
DC current [A]
50
16
10
5
2
1
0,5
0,1
10
20
30
40 50
100
200
300
DC voltage [V]
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2013-02-26
Similar pages