CZB www.vishay.com Vishay Dale Thick Film Chip Attenuator, Surface Mount, Balanced Type FEATURES • Single component reduces board space and component counts - replaces 3 or more Available components • Tolerance matching and temperature tracking superior to individual components • Maximum power dissipation: 0.075 W for CZB06S Available • Consult factory for extended values, non-standard tolerances, impedance matching and other attenuation values • Frequency range: DC to 3 GHz • Surface mount chip attenuator in a resistor array package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER RATING P70 °C W IMPEDANCE 0.075 50/75 CZB06S ATTENUATION RANGE AND TOLERANCE ± 0.3 dB (L) ± 0.5 dB (H) 0 dB, 1 dB to 5 dB 6 dB to 10 dB Note • Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. IMPEDANCE Attenuation in dB (1) 50 75 1 1 1.5 1.5 2 2 3 3 4 4 5 5 6 6 10 10 CIRCUIT SCHEMATIC 4-PIN CIRCUIT CZB06S (Marking) 4 R1 3 R2 R2 1 Note (1) Consult factory for other attenuations. R1 2 Balanced π Type TECHNICAL SPECIFICATIONS PARAMETER UNIT Rated dissipation at 70 °C CZB06S W 0.075 VSWR 1.2 max. Category temperature range °C -55 to +150 Frequency range DC to 3 GHz GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CZB06S04020050LRT (preferred part numbering format) C MODEL CZB06S Z B 0 PIN COUNT 04 = 4 pin 6 S ATTENUATION 010 = 1.0 dB 015 = 1.5 dB 020 = 2.0 dB 100 = 10.0 dB 000 = 0 dB 0 4 0 IMPEDANCE 050 = 50 075 = 75 2 0 0 TOLERANCE H = ± 0.5 dB L = ± 0.3 dB 5 0 L R PACKAGING EA = Lead (Pb)-free, T/R RT = Tin lead, T/R T SPECIAL (Dash number) Up to 1 digit Blank = Standard Note • For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc?31540). Revision: 14-May-14 Document Number: 31101 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CZB www.vishay.com Vishay Dale DIMENSIONS 4-Terminal device S - Version CZB06S Pin 1 CZB06S Pin 1 P DIMENSIONS in inches (millimeters) GLOBAL MODEL CZB06S L W T A P B B* 0.063 ± 0.006 (1.60 ± 0.15) 0.059 ± 0.006 (1.50 ± 0.15) 0.020 ± 0.004 (0.51 ± 0.10) 0.024 ± 0.006 (0.61 ± 0.15) 0.031 (0.80) 0.012 ± 0.006 (0.30 ± 0.15) 0.012 ± 0.006 (0.30 ± 0.15) SOLDER PAD DIMENSIONS in inches (millimeters) c w d a b CZB06S 0.031 (0.80) 0.122 (3.10) 0.014 (0.36) 0.025 (0.63) 0.045 (1.15) Rated Power % GLOBAL MODEL 120 100 80 60 40 20 0 - 55 - 25 0 25 50 Derating CZB06S 70 75 100 125 150 175 Ambient Temperature °C PERFORMANCE TEST CONDITIONS OF TEST TEST RESULTS (TYPICAL TEST LOTS) 0.5 dB to 5 dB 6 dB to 10 dB 1000 h at 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± 0.2 dB ± 0.3 dB Overload per EIA 575-3.6 Short time overload ± 0.2 dB ± 0.3 dB Thermal shock Per EIA 575-3.5 ± 0.2 dB ± 0.3 dB Per EIA 575-3.10 ± 0.2 dB ± 0.3 dB 10 s at 260 °C solder bath temperature EIA 575 3.8 ± 0.2 dB ± 0.3 dB ± 0.3 dB Endurance test at 70 °C per EIA 575-3.14 Moisture resistance Resistance to soldering heat High temperature exposure Per EIA 575-3.7 ± 0.2 dB Low temperature operations Per EIA-575-3.6 ± 0.2 dB Solderability and leaching Revision: 14-May-14 EIA 575-3.12 ± 0.3 dB 95 % coverage Document Number: 31101 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000