CREE CAS325M12HM2 Ultra low loss, low (5 nh) inductance Datasheet

CAS325M12HM2
VDS1.2 kV
1.2kV, 3.6 mΩ All-Silicon Carbide
High Performance, Half-Bridge Module
C2M MOSFET and Z-RecTM Diode
Features
•
•
•
•
•
•
•
•
•
Esw, Total @ 600V, 300A
9.3 mJ
RDS(on) 3.6 mΩ
Package
Ultra Low Loss, Low (5 nH) Inductance
Ultra-Fast Switching Operation
Zero Reverse Recovery Current from Diode
Zero Turn-off Tail Current from MOSFET
Normally-off, Fail-safe Device Operation
AlSiC Baseplate and Si3N4 AMB Substrate
Ease of Paralleling
High Temperature Packaging, TJ(max) = 175 °C
AS9100 / ISO9001 Certified Manufacturing
65mm x 110mm x 10mm
System Benefits
•
•
•
Enables Compact, Lightweight Systems
High Efficiency Operation
Reduced Thermal Requirements
Applications
•
•
•
High-Efficiency Converters / Inverters
Motor & Traction Drives
Smart-Grid / Grid-Tied Distributed Generation
Part Number
Package
Marking
CAS325M12HM2
Half-Bridge Module
CAS325M12HM2
Test Conditions
Notes
Maximum Ratings (TC = 25˚C unless otherwise specified)
Datasheet: CAS3
v. A, 12-2016
25M12HM2, Re
Symbol
Parameter
VDSmax
Drain - Source Voltage
VGSmax
Gate - Source Voltage, Maximum values
VGSop
Gate - Source Voltage, Recommended Operation
values
ID
TJmax
TC ,TSTG
Continuous Drain Current
Junction Temperature
Case and Storage Temperature Range
Visol
Case Isolation Voltage
PD
Power Dissipation
Value
Unit
1.2
kV
-10/+25
-10/+23
-5/+20
V
V
256
TJ = -55 to 175 °C
TJ = -55 to 150 °C
TJ = -55 to 175 °C
-5/+18
444
TJ = -55 to 150 °C
A
TC = 25 ˚C TJ = 175 °C
TC = 125˚C, TJ = 175 °C
175
˚C
-55 to +175
˚C
1.2
kV
AC, 50 Hz , 1 min
1500
W
TC = 25 ˚C, TJ = 175 ˚C (per switch)
Subject to change without notice.
www.cree.com
Fig. 17
Fig. 16
1
Electrical Characteristics (TC = 25˚C unless otherwise specified)
Symbol
Parameter
VDSS
Drain - Source Blocking Voltage
VGS(th)
Gate Threshold Voltage
Typ.
Max.
1.2
2.6
4
2.0
IDSS
Zero Gate Voltage Drain Current
Gate-Source Leakage Current
Unit
kV
2.0
IGSS
RDS(on)
Min.
720
Input Capacitance
19.5
Coss
Output Capacitance
1.54
Crss
Reverse Transfer Capacitance
0.10
Eon
Turn-On
Switching Energy 5.6
EOff
Turn-Off Switching Energy 3.7
QGS
Gate-Source Charge
322
QGD
Gate-Drain Charge
350
QG
Total Gate Charge
1127
VDS =VGS, ID= 105 mA, TJ = 175 ˚C
μA
VDS = 1.2 kV, VGS = -5 V
nA
VGS = 20 V, VDS = 0 V
7.6
Ciss
VDS =VGS, ID= 105 mA
V
3.5
4.3
Note
VGS = -5 V, ID = 2 mA
2000
3.6
On State Resistance
Test Conditions
VGS = 20 V, IDS = 400 A
mΩ
VGS = 18 V, IDS = 400 A, TJ = 175 ˚C
Fig. 5
nF
VGS = 0 V, VDS = 1000 V, f = 1 MHz,
VAC = 25 mV
Fig. 11,
12
mJ
VDD = 600 V, VGS = -5V/+20V
ID = 300 A, RG(ext) = 2Ω
Note: IEC 60747-8-4 Definitions
Fig. 13
nC
VDS= 800 V, VGS = -5V/+20V,
ID= 350 A, Per IEC 60747-8-4
dff
Free-Wheeling SiC Schottky Diode Characteristics
Symbol
Parameter
VSD
Diode Forward Voltage
QC
Total Capacitive Charge
Min.
Typ.
Max.
1.7
2.0
2.5
2.8
4.3
Unit
Test Conditions
IF = 350 A, VGS = -5 V
V
IF = 350 A, TJ = 175 ˚C, VGS = -5 V
μC
Note
Fig. 6
Includes Schottky & Body diodes
Note: The reverse recovery is purely capacitive
Thermal Characteristics
Symbol
Parameter
Min.
Typ.
Max.
RthJCM
Thermal Resistance Juction-to-Case for MOSFET
0.085
0.100
0.115
RthJCD
Thermal Resistance Juction-to-Case for Diode
0.094
0.110
0.127
Unit
Test Conditions
Fig.
18,19
˚C/W
Additional Module Data
Symbol
2
Parameter
W
Weight
M
Mounting Torque
LCE
Loop Inductance
CAS325M12HM2, Rev. A, 12-2016
Min.
Typ.
Max.
140
Test Condtion
g
0.9
1.1
1.3
3
4.5
5
5
Unit
Nm
nH
Note
Power Terminals, M4 Bolts
Baseplate, M6 Bolts
Typical Performance
3
Figure 1. Typical Output Characteristics TJ = 25 ˚C
Figure 2. Typical Output Characteristics TJ = 175 ˚C
Figure 3. Typical Output Characteristics TJ = 150 ˚C
Figure 4. Typical Output Characteristics TJ = 175 ˚C
Figure 5. On-Resistance vs. Temperature for
Various Gate-Source Voltage
Figure 6. Antiparallel Diode Characteristic,
VGS = -5 V
CAS325M12HM2, Rev. A, 12-2016
Typical Performance
4
Figure 7. 3rd Quadrant Characteristic at 25 ˚C
Figure 8. 3rd Quadrant Characteristic at 125 ˚C
Figure 9. 3rd Quadrant Characteristic at 150 ˚C
Figure 10. 3rd Quadrant Characteristic at 175 ˚C
Figure 11. Typical Capacitances vs. Drain-Source
Voltage (0 - 200 V)
Figure 12. Typical Capacitances vs. Drain-Source
Voltage (0 - 1 kV)
CAS325M12HM2, Rev. A, 12-2016
Typical Performance
5
Figure 13. Inductive Switching Energy vs.
Drain Current For VDD = 600V, RG = 2 Ω
Figure 14. Inductive Switching Energy vs.
Drain Current For VDD = 800V, RG = 2 Ω
Figure 15. Inductive Switching Energy vs.
Gate Resistance, IDS = 300A
Figure 16. Maximum Power Dissipation (MOSFET) Derating
Per Switch Position vs Case Temperature
Figure 17. Continous Drain Current Derating vs
Case Temperature
Figure 18. MOSFET Junction to Case Thermal Impedance
CAS325M12HM2, Rev. A, 12-2016
Typical Performance
Figure 19. Diode Junction to Case Thermal Impedance
Package Dimensions (mm)
CAS325M12HM2
Unspecified Dimensions
.XX = ± 0.3 mm
6
CAS325M12HM2, Rev. A, 12-2016
Important Notes
•
The SiC MOSFET module switches at speeds beyond what is customarily associated with IGBT-based moules. Therefore, special
precautions are required to realize the best performance. The interconnection between the gate driver and module housing needs
to be as short as possible. This will afford the best switching time and avoid the potential for device oscillation. Also, great care is
required to insure minimum inductance between the module and DC link capacitors to avoid excessive VDS overshoot.
The module utilizes the ESQT-105-02-G-D-XXX family of elevated socket connectors from Samtec, available in varying height according to the customer’s preference
Companion Parts: CGD15HB62LP + High Performance Three Phase Evaluation Unit
Some values were obtained from the CPM2-1200-0025B and CPW5-1200-Z050B device datasheet.
This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body
nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited
to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical
equipment, aircraft navigation or communication or control systems, air traffic control systems.
The product described is not eligible for Distributor Stock Rotation or Inventory Price Protection.
•
•
•
•
•
Copyright © 2014 - 2016 Cree, Inc. All rights reserved.
The information in this document is subject to change without notice.
Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc.
7
CAS325M12HM2 Rev. A, 12-2016
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5451
www.cree.com/power
Similar pages