Diodes D5V0X1B3LP3713 Low capacitance bidirectional tvs diode Datasheet

D5V0L1B2LP3
Green
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE
Features
•
NEW PRODUCT
•
•
•
•
•
•
Mechanical Data
Ultra-Small, Low Profile Leadless Surface Mount Package (0.6 x
0.3 x 0.3mm)
Provides ESD Protection per IEC 61000-4-2 Standard:
Air – ±30kV, Contact – ±30kV
1 Channel of ESD Protection
Low Channel Input Capacitance
Typically Used in Cellular Handsets, Portable Electronics,
Communication Systems, Computers and Peripherals
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Top View
Case: X3-DFN0603-2
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish − Matte Tin over Copper Leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.0002 grams (Approximate)
•
•
•
•
•
Bottom View
Device Schematic
Ordering Information (Note 4)
D 5V0 L X B X XXX- XX
Voltage
Capacitance
5V0: 5.0 Volts X: Extremely Low (<0.5pF)
F: Ultra Low (0.5 ~ 1.0pF)
P: Very Low (1.1 ~ 10pF)
L: Low (10.1 ~ 20pF)
M: Medium (>20pF)
Product
D5V0L1B2LP3-7
Notes:
# of Channels
Polarity
# of Pins
Package
1: 1 Channel
2: 2 Channels
4: 4 Channels
6: 6 Channels
B: Bidirectional
(Symmetrical)
U: Unidirectional
A: Bidirectional
(Asymmetrical)
2: 2 Pins
3: 3 Pins
5: 5 Pins
6: 6 Pins
8: 8 Pins
10: 10 Pins
LP3: X3-DFN0603-2
LP: X1-DFN1006-2
LP4: X2-DFN1006-2
WS: SOD323
T: SOD523/SOT523
SO: SOT23/SOT25
W: SOD123/SOT323
TS: TSOT25/TSOT26
S: SOT353/SOT363
V:SOT553/SOT563
Compliance
Standard
Marking
N
Reel size (inches)
7
Tape width (mm)
8
Packing
7: 7” reel
7B: 7” reel (DFN1006
Package Only)
13: 13” reel
Quantity per reel
10,000/Tape & Reel
1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
Marking Information
X3-DFN0603-2
N = Product Type Marking Code
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
1 of 6
www.diodes.com
April 2015
© Diodes Incorporated
D5V0L1B2LP3
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Characteristic
Value
Unit
PPP
84
W
8/20µs, Per Fig. 1
Peak Pulse Current
IPP
6
A
8/20µs, Per Fig. 1
ESD Protection – Contact Discharge
Conditions
VESD_Contact
±30
kV
Standard IEC 61000-4-2
VESD_Air
±30
kV
Standard IEC 61000-4-2
ESD Protection – Air Discharge
Thermal Characteristics
Characteristic
Symbol
Value
PD
250
mW
RθJA
500
°C/W
TJ, TSTG
-65 to +150
°C
Package Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
Operating and Storage Temperature Range
Unit
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse Standoff Voltage
Channel Leakage Current (Note 6)
Clamping Voltage, Positive Transients
Symbol
Min
Typ
Max
Unit
VRWM
—
—
5
V
IRM
—
10
100
nA
—
7.0
9.0
IPP = 1A, tp = 8/20µS, Figure 1
—
8.7
10.7
IPP = 3A, tp = 8/20µS, Figure 1
—
10.5
12.0
—
11.5
14.0
8
V
IR = 1mA
Ω
IR = 1A, tp = 8/20µS
VCL
Breakdown Voltage
VBR
6
7
Differential Resistance
RDIF
—
0.2
—
—
15
18
—
12.5
—
Channel Input Capacitance
Notes:
CT
V
Test Conditions
—
VRWM = 5V
IPP = 5A, tp = 8/20µS, Figure 1
IPP = 6A, tp = 8/20µS, Figure 1
pF
VR = 0V, f = 1MHz
VR = 2.5V, f = 1MHz
5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
18
f = 1MHz
17
100
Peak Value Ipp
CT, TOTAL CAPACITANCE (pF)
IPP, PEAK PULSE CURRENT (%Ipp)
NEW PRODUCT
Symbol
Peak Pulse Power Dissipation
Half Value I pp/2
50
16
15
14
13
12
11
8x20 Waveform
as defined by R.E.A.
0
0
20
40
t, TIME (µs)
Figure 1 Pulse Waveform
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
60
10
0
2
3
4
5
6
VR, REVERSE VOLTAGE (V)
Figure 2 Typical Total Capacitance vs. Reverse Voltage
2 of 6
www.diodes.com
1
April 2015
© Diodes Incorporated
D5V0L1B2LP3
100
IR, LEAKAGE CURRENT (nA)
PEAK PULSE DERATING % OF
PEAK POWER OR CURRENT
75
50
25
0
0
25
TA = 85°C
T A = 25°C
T A = -55°C
1
0
1
2
3
4
5
VR, REVERSE VOLTAGE (V)
Figure 4 Typical Reverse Characteristics
6
Rise time = 0.7ns to 1ns
IESD, DISCHARGE CURRENT (%)
10
8
6
4
2
0
TA = 125°C
10
120
12
0
TA = 150°C
0.1
50
75 100 125 150 175 200
TA, AMBIENT TEMPERATURE (°C)
Figure 3 Pulse Derating Curve
14
VC (V)
1
100
80
60
53
40
27
20
0
-10
2
3
4
5
6
7
IPP (A)
Figure 5 Typical Peak Clamping Voltage VC vs.
Peak Pulse Current IPP
50
0
10 20 30 40 50 60 70 80 90 100
TIME (ns)
Figure 6 ESD Discharge Current Wave Form
IEC 6100-4-2 (330Ω/150pF)
40
IEC 61000-4-2 Contact Discharge
IEC 61000-4-2 +8kV Contact Discharge
35
40
30
30
Positive
25
20
VC-ESD (V)
NEW PRODUCT
100
10
0
5
Negative
-30
-40
0
15
10
-10
-20
20
0
10
20
30
40
-5
0
VESD (kV)
Figure 7 Typical Clamping Voltage vs.
Contact Discharge Voltage
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
3 of 6
www.diodes.com
20
40
60 80 100 120 140 160 180 200
t (ns)
Figure 8 Typical Clamping Performance
@ 8kV Contact Discharge
April 2015
© Diodes Incorporated
D5V0L1B2LP3
5
IEC 61000-4-2 -8kV Contact Discharge
0
-5
VC-ESD (V)
NEW PRODUCT
-10
-15
-20
-25
-30
-35
-40
0
20
40
60 80 100 120 140 160 180 200
t (ns)
Figure 9 Typical Clamping Performance
@ -8kV Contact Discharge
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
4 of 6
www.diodes.com
April 2015
© Diodes Incorporated
D5V0L1B2LP3
Package Outline Dimensions
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
NEW PRODUCT
A
X3-DFN0603-2
Dim
Min
Max
Typ
A
0.27
0.35
0.30
A1
0.00
0.03
0.02
b
0.19
0.29
0.24
D
0.595 0.645 0.62
E
0.295 0.345 0.32
e
0.355
L
0.14
0.24
0.19
All Dimensions in mm
A1 (2x)
D
e
E
b (2x)
L (2x)
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
X
X1
Dimensions
C
X
X1
Y
Y
Value
(in mm)
0.380
0.230
0.610
0.300
C
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
5 of 6
www.diodes.com
April 2015
© Diodes Incorporated
D5V0L1B2LP3
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
D5V0L1B2LP3
Document number: DS35533 Rev. 8 - 2
6 of 6
www.diodes.com
April 2015
© Diodes Incorporated
Similar pages