HP HLMP-CB27-R0C00 T-1 3/4 (5 mm) extra bright precision optical performance ingan led lamp Datasheet

Agilent HLMP-Cxxx
T-13/4 (5 mm) Extra Bright Precision
Optical Performance InGaN LED Lamps
Data Sheet
Features
HLMP-CB11, HLMP-CB12, HLMP-CM11, HLMP-CM12, HLMP-CE11,
HLMP-CE12, HLMP-CB26, HLMP-CB27, HLMP-CM26, HLMP-CM27,
HLMP-CE26, HLMP-CE27, HLMP-CB36, HLMP-CB37, HLMP-CM36,
HLMP-CM37, HLMP-CE36, HLMP-CE37
Description
These high intensity blue and
green LEDs are based on the
most efficient and cost effective
InGaN material technology. The
470 nm typical dominant wave–
length for blue and 525 nm
typical wavelength for green is
well suited to color mixing in
full color signs. The 505 nm
typical dominant wavelength for
cyan is suitable for traffic signal
application.
These LED lamps are untinted,
non-diffused, T-13/4 packages
incorporating second generation
optics which produce well-defined
spatial radiation patterns at
specific viewing cone angles.
These lamps are made with an
advanced optical grade epoxy,
offering superior temperature
and moisture resistance in
outdoor signal and sign
applications. The high maximum
LED junction temperature limit
of +110 ° C enables high
temperature operation in bright
sunlight conditions.
• Well defined spatial radiation
pattern
• High luminous output
• Available in blue, green, and cyan
color
• Viewing angle: 15°, 23° and 30 °
• Standoff or non-standoff leads
• Superior resistance to moisture
Applications
•
•
•
•
Traffic signals
Commercial outdoor advertising
Front panel backlighting
Front panel indicator
CAUTION: Devices are Class I ESD sensitive. Please observe appropriate precautions during
handling and processing. Refer to Application Note AN-1142 for additional details.
Package Dimensions
Package A
2.35 (0.093)
MAX.
1.14 ± 0.20
(0.045 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
∅ 5.80 ± 0.20
(0.228 ± 0.008)
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
0.70 (0.028)
MAX.
2.54 ± 0.38
(0.100 ± 0.015)
NOTE 1
CATHODE
LEAD
8.71 ± 0.20
(0.343 ± 0.008)
1.00 MIN.
(0.039)
CATHODE
FLAT
31.60 MIN.
(1.244)
Package B
∅ 5.80 ± 0.20
(0.228 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
1.50 ± 0.15
(0.059 ± 0.006)
0.70 (0.028)
MAX.
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
5.00 ± 0.20
NOTE 1
(0.197 ± 0.008)
2.54 ± 0.38
(0.100 ± 0.015)
CATHODE
LEAD
8.71 ± 0.20
(0.343 ± 0.008)
1.00 MIN.
(0.039)
DIMENSION H
(REFER TO TABLE BELOW)
31.60 MIN.
(1.244)
DIMENSION H:
15° = 11.40 ± 0.25 mm (0.449 ± 0.01 INCH)
23° = 11.85 ± 0.25 mm (0.467 ± 0.01 INCH)
30° = 11.50 ± 0.25 mm (0.453 ± 0.01 INCH)
NOTES:
1. MEASURED JUST ABOVE FLANGE.
2. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
3. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
4. IF HEAT SINKING APPLICATION IS REQUIRED, THE TERMINAL FOR HEAT SINK IS ANODE.
2
CATHODE
FLAT
Device Selection Guide
Part Number
Color
Typical
Viewing Angle,
2q1/2 (Degree)
HLMP-CB11-TW0xx
Blue
15
2.5
7.2
No
A
Clear
HLMP-CB11-UVAxx
Blue
15
3.2
5.5
No
A
Clear
HLMP-CB12-TW0xx
Blue
15
2.5
7.2
Yes
B
Clear
HLMP-CM11-Y20xx
Green
15
9.3
27.0
No
A
Clear
HLMP-CM11-Z1Cxx
Green
15
12.0
21.0
No
A
Clear
HLMP-CM12-Y20xx
Green
15
9.3
27.0
Yes
B
Clear
HLMP-CE11-X10xx
Cyan
15
7.2
21.0
No
A
Clear
HLMP-CE12-X10xx
Cyan
15
7.2
21.0
Yes
B
Clear
HLMP-CB26-SV0xx
Blue
23
1.9
5.5
No
A
Clear
HLMP-CB26-TUDxx
Blue
23
2.5
4.2
No
A
Clear
HLMP-CB27-SV0xx
Blue
23
1.9
5.5
Yes
B
Clear
HLMP-CM26-X10xx
Green
23
7.2
21.0
No
A
Clear
HLMP-CM26-YZCxx
Green
23
9.3
16.0
No
A
Clear
HLMP-CM27-X10xx
Green
23
7.2
21.0
Yes
B
Clear
HLMP-CE26-WZ0xx
Cyan
23
5.5
16.0
No
A
Clear
HLMP-CE27-WZ0xx
Cyan
23
5.5
16.0
Yes
B
Clear
HLMP-CB36-QT0xx
Blue
30
1.15
3.2
No
A
Clear
HLMP-CB36-RSAxx
Blue
30
1.5
2.5
No
A
Clear
HLMP-CB37-RU0xx
Blue
30
1.5
4.2
Yes
B
Clear
HLMP-CB37-RSDxx
Blue
30
1.5
2.5
Yes
B
Clear
HLMP-CM36-X10xx
Green
30
7.2
21.0
No
A
Clear
HLMP-CM36-XYCxx
Green
30
7.2
12.0
No
A
Clear
HLMP-CM37-X10xx
Green
30
7.2
21.0
Yes
B
Clear
HLMP-CM37-XYCxx
Green
30
7.2
12.0
Yes
B
Clear
HLMP-CM37-XYDxx
Green
30
7.2
12.0
Yes
B
Clear
HLMP-CE36-WZ0xx
Cyan
30
5.5
16.0
No
A
Clear
HLMP-CE37-WZ0xx
Cyan
30
5.5
16.0
Yes
B
Clear
Intensity (cd) at 20 mA
Min.
Max.
Standoff
Package
Dimension
Lens
Notes:
1. Tolerance for luminous intensity measurement is ±15%.
2. The luminous intensity is measured on the mechanical axis of the lamp package.
3. The optical axis is closely aligned with the package mechanical axis.
4. LED light output is bright enough to cause injuries to the eyes. Precautions must be taken to prevent looking directly at the LED without proper
safety equipment.
5. 2q1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
3
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Options
00: Bulk
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
A: Color Bin 1 and 2
C: Color Bin 3 and 4
D: Color Bin 4 and 5
Maximum Intensity Bin
0: No Maximum Intensity Bin Limitation
Others: Refer to Device Selection Guide
Minimum Intensity Bin
Refer to Device Selection Guide
Viewing Intensity Bin
11: 15° Without Standoff
12: 15° With Standoff
26: 23° Without Standoff
27: 23° With Standoff
36: 30° Without standoff
37: 30° With Standoff
Color
B: Blue 470 nm
M: Green 525 nm
E: Cyan 505 nm
Package
C: T-13/4 (5 mm) Round Lamp
4
Absolute Maximum Rating at TA = 25°C
Parameters
Value
Unit
30
mA
100
mA
Average Forward Current
30
mA
Power Dissipation
120
mW
LED Junction Temperature
110
°C
Operating Temperature Range
–40 to +85
°C
Storage Temperature Range
–40 to +100
°C
Wave Soldering Temperature[2]
250 for 3 secs
°C
DC Forward
Current [1]
Peak Pulsed Forward
Current[3]
Notes:
1. Derate linearly as shown in Figure 2.
2. 1.59 mm (0.060 inch) below body.
3. Duty factor 10%, frequency 1 KHz.
Electrical/Optical Characteristics
TA = 25o C
Blue
Parameters
Symbol
Forward Voltage
VF
Reverse
Voltage[1]
VR
Min. Typ. Max.
Green
Min. Typ. Max.
3.5 4.0
5.0
Cyan
Min. Typ. Max.
Units
Test Condition
3.5 4.0
V
IF = 20 mA
V
IR = 10 µA
240
o C/W
LED Junction to
Anode Lead
490 505 510
nm
IF = 20 mA
3.6 4.0
5.0
240
5.0
Thermal Resistance
RqJ-PIN
Dominant
Wavelength[2]
ld
Peak Wavelength
lPEAK
464
516
501
nm
Peak of Wavelength
of Spectral Distribution at IF = 20 mA
Spectral Half Width
Dl1/2
23
32
30
nm
Wavelength Width
at Spectral Distribution Power Point
at IF = 20 mA
Luminous Efficacy[3]
hv
74
484
319
lm/W Emitted Luminous
Power/Emitted
Radiant Power
460
470 480
240
520
525 540
Notes:
1. The reverse voltage of the product is equivalent to the forward voltage of the protective chip at I R = 10 µA.
2. The dominant wavelength, ld, is derived from the Chromaticity Diagram and represents the color of the lamp.
3. The radiant intensity, Ie in watts/steradian, may be found from the equation Ie = Iv/h v, where Iv is the luminous intensity in candelas and hv is the
luminous efficacy in lumens/watt.
5
1.00
40
IF – FORWARD CURRENT – mA
CYAN
RELATIVE INTENSITY
0.80
GREEN
BLUE
0.60
0.40
0.20
0
350
20
RΘJ-A = 780 °C/W
10
0
400
450
500
550
600
650
RΘJ-A = 585 °C/W
30
0
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
RELATIVE DOMINANT WAVELENGTH
(NORMALIZED AT 20 mA)
FORWARD CURRENT – mA
BLUE
20
10
GREEN
0
1.0
4.0
3.0
2.0
80
100
Figure 3. Forward current vs. forward voltage.
1.6
1.4
1.2
1.0
0.8
GREEN
0.6
0.4
BLUE
0.2
0
0
5
10
15
20
1.020
GREEN
1.015
1.010
1.005
BLUE
1.000
0.995
0.990
0
10
20
30
DC FORWARD CURRENT – mA
FORWARD VOLTAGE – V
RELATIVE INTENSITY (NORMALIZED AT 20 mA)
60
1.025
CYAN
25
30
FORWARD CURRENT – mA
Figure 5. Relative intensity vs. DC forward current.
6
40
Figure 2. Forward current vs. ambient temperature.
30
0
20
VF – FORWARD VOLTAGE – VOLTS
Figure 4. Relative dominant wavelength vs. DC forward current.
RELATIVE LUMINOUS INTENSITY
1
0.5
0
-90
-60
-30
0
30
60
90
60
90
60
90
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Spatial radiation pattern for Cx11 and Cx12.
RELATIVE LUMINOUS INTENSITY
1
0.5
0
-90
-60
-30
0
30
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Spatial radiation pattern for Cx26 and Cx27.
RELATIVE LUMINOUS INTENSITY
1
0.5
0
-90
-60
-30
0
30
ANGULAR DISPLACEMENT – DEGREES
Figure 8. Spatial radiation pattern for Cx36 and Cx37.
7
Intensity Bin Limit Table
Blue Color Bin Table
Intensity (mcd) at 20 mA
Bin
Min Dom
Max Dom
Xmin
Ymin
Xmax
Ymax
Bin
Min
Max
1
460.0
464.0
0.1440
0.0297
0.1766
0.0966
N
680
880
0.1818
0.0904
0.1374
0.0374
2
464.0
468.0
0.1374
0.0374
0.1699
0.1062
0.1766
0.0966
0.1291
0.0495
0.1291
0.0495
0.1616
0.1209
0.1699
0.1062
0.1187
0.0671
0.1187
0.0671
0.1517
0.1423
0.1616
0.1209
0.1063
0.0945
0.1063
0.0945
0.1397
0.1728
0.1517
0.1423
0.0913
0.1327
P
880
1150
Q
1150
1500
R
1500
1900
S
1900
2500
T
2500
3200
U
3200
4200
V
4200
5500
W
5500
7200
X
7200
9300
Y
9300
12000
Z
12000
16000
Green Color Bin Table
1
16000
21000
Bin
Min Dom
Max Dom
Xmin
Ymin
Xmax
Ymax
1
520.0
524.0
0.0743
0.8338
0.1856
0.6556
0.1650
0.6586
0.1060
0.8292
0.1060
0.8292
0.2068
0.6463
0.1856
0.6556
0.1387
0.8148
0.1387
0.8148
0.2273
0.6344
0.2068
0.6463
0.1702
0.7965
0.1702
0.7965
0.2469
0.6213
0.2273
0.6344
0.2003
0.7764
0.2003
0.7764
0.2659
0.6070
0.2469
0.6213
0.2296
0.7543
Tolerance for each bin limit is ±15%.
3
4
5
468.0
472.0
476.0
472.0
476.0
480.0
Tolerance for each bin limit is ±0.5 nm.
2
3
4
5
524.0
528.0
532.0
536.0
528.0
532.0
536.0
540.0
Tolerance for each bin limit is ±0.5 nm.
Cyan Color Bin Table
Bin
Min Dom
Max Dom
Xmin
Ymin
Xmax
Ymax
1
490.0
495.0
0.0454
0.2945
0.1164
0.3889
0.1318
0.306
0.0235
0.4127
0.0345
0.4127
0.1057
0.4769
0.1164
0.3889
0.0082
0.5384
0.0082
0.5384
0.1027
0.5584
0.1057
0.4769
0.0039
0.6548
0.0039
0.6548
0.1097
0.6251
0.1027
0.5584
0.0139
0.7502
0.0132
0.4882
0.1028
0.5273
0.1092
0.4417
0.0040
0.6104
0.0040
0.6104
0.1056
0.6007
0.1028
0.5273
0.0080
0.7153
2
3
4
7
8
495.0
500.0
505.0
498.0
503.0
500.0
505.0
510.0
503.0
508.0
Tolerance for each bin limit is ±0.5 nm.
8
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
December 7, 2004
5989-1022EN
Similar pages