UTC ABS210G-ABS-R Glass passivated die construction Datasheet

UNISONIC TECHNOLOGIES CO., LTD
ABS22 THRU ABS210
SCHOTTKY BRIDGE DIODE
2.0A SCHOTTKY BRIDGE
RECTIFIER

DESCRIPTION
The UTC ABS22 THRU ABS210 is a schottky bridge rectifier, it
uses UTC’s advanced technology to provide customers with high
surge current capability and low forward voltage drop, etc.
The UTC ABS22 THRU ABS210 is suitable for surface mount
application.

-
+
ABS
FEATURES
* Glass passivated die construction
* Low forward voltage drop
* High current capability
* High surge current capability
* Designed for surface mount application

SYMBOL

ORDERING INFORMATION
Ordering Number
ABS22G-ABS-R
ABS24G-ABS-R
ABS26G-ABS-R
ABS28G-ABS-R
ABS210G-ABS-R

Package
ABS
ABS
ABS
ABS
ABS
Packing
Tape Reel
Tape Reel
Tape Reel
Tape Reel
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2016 Unisonic Technologies Co., Ltd
1 of 3
QW-R202-064 .A
ABS22 THRU ABS210

SCHOTTKY BRIDGE DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PARAMETER
SYMBOL
ABS22
200
200
200
140
ABS24
400
400
400
280
RATINGS
ABS26 ABS28 ABS210
600
800
1000
600
800
1000
600
800
1000
420
560
700
2
UNIT
Peak Repetitive Reverse Voltage
VRRM
V
Working Peak Reverse Voltage
VRWM
V
DC Blocking Voltage
VDC
V
RMS Voltage
VRMS
V
Average Rectified Output Current
TA=100°C
IO
A
Peak Forward Surge Current, 8.3ms Single
IFSM
60
A
Half Sine-Wave Superimposed on Rated Load
Operating Junction Temperature Range
TJ
-55 ~ +150
°C
Storage Temperature Range
TSTG
-55 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL DATA
PARAMETER
SYMBOL
Junction to Ambient
θJA
Note: Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.

RATINGS
62.5
UNIT
°С/W
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
Forward Voltage Per Element
VF
Peak Reverse Current at Rated DC Blocking
Voltage
IR
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TEST CONDITIONS
IF=1.0A
IF=2.0A
TA=25°C
TA=125°C
MIN
TYP MAX UNIT
0.95
V
1.0
V
5.0
μA
200 μA
2 of 3
QW-R202-064 .A
ABS22 THRU ABS210
SCHOTTKY BRIDGE DIODE
TYPICAL CHARACTERISTICS

1.6
1.2
0.8
0
Single Phase Half Wave 60Hz
Resistive or Inductive Load
0
50
100
Case Temperature (°C)
150
Maximum Non-repetitive
Forward Surge Current
60
Peak Forward Surge Current (A)
Instantaneous Forward Current (A)
2.0
0.4
Typical Forward Characteristic
10
40
30
20
Single Half-sine-wave
(JEDEC METHOD)
0
1
2
5
10 20
50
Number Of Cycles At 60Hz
0.1
TA=25℃
Pulse Width:300us
2% Duty Cycle
0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Forward Voltage (V)
Typical Reverse Characteristics
50
10
1.0
100
Instantaneous Reverse Current (μA)
Average Forward Current (A)
Maximum Forward Current Derating Curve
2.4
100
TA=125°C
10
TA=75°C
1
0.1
TA=25°C
0.01
0
20
40
60
80
100
120 140
Percent Of Rated Peak Reverse Voltage (%)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R202-064 .A
Similar pages