LED-12W Series Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ 120V, >0.75 @ 277V Inrush Current: <15.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.15 Amps max at 120 Vac Maximum Power: 12W Line Regulation: ± 1% (when applicable) Load Regulation: ± 3% THD: < _ 20% @ 120 Vac, < _ 35% @ 277 Vac Leakage Current: 300 µA Typical Hold Up Time: Half Cycle Protection: utput Over-Voltage, Output Over-Current, and O Output Short Circuit Protection with Auto Recovery • Total Power: 12 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • Suitable for use signs (UL48) • High Power Factor • UL Sign Components Manual (S.A.M. Models) Environmental Specifications Minimum Starting Temp: -30ºC Storage Temperature: -40ºC to +85ºC Maximum Case Temp. 90°Cv Humidity: 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz/2g, 30 minutes Sound Rating: Class A MTBF: 550,000 Hours @ full load & 40ºC ambient conditions > per MIL-217F Notice 2 EMC: Compliant to CISPR 22 Class B, CISPR 14-1 Class B, GB4343 1-2003, GB17625.1-2003 Weight: 4.5 oz. (128 g) Constant Current - Product Specifications Model Number Output Current Output Voltage (mA ±5%) Range (Vdc) Max. Output Typical Power (W) Efficiency LED12W-48-C0250 250 24-48 12 82% LED12W-36-C0350 350 18-36 12.6 81% LED12W-24-C0350 350 16.4-24 8.2 80% LED12W-24-C0500 500 12-24 12 80% LED12W-16-C0700 700 11.2-16 11.2 79% LED12W-16-C0800 800 8-16 12.8 79% LED12W-12-C1000 1000 6-12 12 78% Constant Voltage - Product Specifications Model Number LED12W-12 LED12W-16 LED12W-24 LED12W-36 LED12W-48 • • Output Voltage Output Current (Vdc ±5%) Range (mA) Max. Output Power (W) Typical Efficiency 12 250-1000 12 78% 16 200-800 12.8 79% 24 125-500 12 80% 36 88-350 12.6 81% 48 62-250 12 Sign Components Manual 82% • Indicates S.A.M. E332160 Class 2: US/Canada US Only Safety and EMC Compliance Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. UL/CUL CSA CE FCC, 47CFR Part 15 UL8750 22.2 EN61347 Class B Specifications subject to change without notice. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com Rev 9-8-15 LED12W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 2 Dimensions - IN[mm] 3.35 [85] [17.5] [10.75] OUTPUT Red (+) Blue (-) [3.5] 2 x Ø 0.14 [3.5] Tc = 90°C max 5.98 [152] 1.4 [36] [7] [1.5] [1.5] 1.38 [35] 0.28 [7] 0.14 [3.5] 5.98 [152] INPUT White (N) Black (L) 0.75 [19] 0.16 [4] 0.9 [23] 0.42 [10.75] [7.5] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. All wires are stranded with solder dipped ends. Power Factor / Load 1.00 [6] [9.5] THD / Load 50% 0.90 45% 0.80 40% 0.70 35% 0.60 30% THD PF [8] 0.50 0.40 25% 120Vac 277Vac 0.30 0.20 15% 0.10 10% 0.00 50% 60% 70% 80% 90% Load 120Vac 277Vac 20% 100% 0% 50% 60% 70% 80% Load 90% 100% Lifetime / Case Temperature (Full Load @ 120Vac) 250 Lifetime (kHrs) 225 200 175 150 125 100 75 50 25 0 40 45 50 55 60 65 70 75 Case Hotspot Temperature (°C) 80 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com