CITIZEN CLU550-3626C1-40AL7G4-B24 Citiled cob series hp type Datasheet

DATA SHEET
CITILED COB Series
HP Type
CLU550-3626C1
Introduction
P 2
Performance Characteristics
P 3
Mechanical Dimensions
P 5
Characteristic Curves
P 6
Reliability
P 9
Packing Specification
P 10
Precaution
P 11
1
Ref.CE-P3326 09/15
Product Nomenclature
CLU550 - 36 26 C1 - 27 3 M2 G2 - B24
[1]
[2]
[3]
[4]
[5]
[1]
Product shape
CLU550
[2]
Die count in series
36
[3]
Die count in parallel
26 (13 in parallel × 2channels )
[4]
Nominal CCT
2700K
[5]
CRI (Ra)
Min.80
1. Introduction
1-1. Product Description
CITIZEN ELECTRONICS is the first COB manufacture. Our advanced knowledge and packaging technology for many
years has excellent reliability and high quality of our products. CITILED COB Series covers a wide range of luminous flux
from a 10W incandescent bulb to a 500W sodium lamp in general lighting sources. The element arrangement of LED
package is capable of utilizing light more effectively and higher performance.
The new version of CITILED COB series increase the performance significantly from previous version. New version
creates more options to match luminaire's products design (ex. High performance , Cost effective , Small Light Emitting
Surface(LES), Increased allowable max. If). Emitted light density of the LED package is improved higher for suitable use of
light-condensing products. The outline and LES size is the same as for previous version. Thus existing parts of 3rd
parties are compatible in mechanical characteristics. All of specs are at hot binning (Tj=85℃).
1-2. Features
・Mechanical Dimensions
・Package Structure
・Reference Assembly
・CRI (Ra)
・Nominal CCT
・Chromaticity Range
:
:
:
:
:
38.0×38.0×1.4 (mm)
Aluminum Base Chip on Board
M3 screw , Connector
80Min., 70Min.
2,700K, 3,000K, 3,500K, 4,000K, 5,000K ,6,500K ( CRI(Ra) 80Min. )
3,000K, 4,000K, 5,000K, 6,500K ( CRI(Ra) 70Min. )
: 3-step MacAdam Ellipse, the center refers to ANSI C78.377:2011. ( CRI(Ra) 80Min. )
ANSI C78.377:2011. compliant ( CRI(Ra) 70Min. )
: 0.10C/W
: 4680mA (2340mA Max per channel)
・Thermal Resistance
・Maximum drive current
・RoHS compliant
・Better die arrangement for optics
・Wide range of luminous flux and high efficacy
・Improved lumen density compared with previous version
・UL recognized component (E358566)
2
Ref.CE-P3326 09/15
2. Performance Characteristics
2-1. Electro Optical Characteristics
( Tj=85C )
Luminous flux
( lm )
CRI
Product code
Nominal
CCT
Ra
R9
Tj=85C
Min.
Typ.
Efficacy Forward
( lm/W ) Current
Tc=25C*
( mA )
Typ.
Typ.
Voltage
( V)
Thermal
Resistance
Rj-c
( C/W )
Min.
Min.
Min.
Typ.
Max.
CLU550-3626C1-273M2G2-B24
2700K
80
0
26,620 30,250
32,338
124
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-303M2G2-B24
3000K
80
0
27,896 31,700
33,888
130
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-353M2G2-B24
3500K
80
0
28,600 32,500
34,744
134
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-403M2G2-B24
4000K
80
0
29,172 33,150
35,439
136
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-503M2G2-B24
5000K
80
0
29,744 33,800
36,133
139
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-653M2G2-B24
6500K
80
0
30,272 34,400
36,775
141
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-30AL7G4-B24
3000K
70
-
29,832 33,900
36,240
139
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-40AL7G4-B24
4000K
70
-
31,240 35,500
37,951
146
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-50AL7G4-B24
5000K
70
-
31,680 36,000
38,485
148
2,340
95.5
103.9
112.3
0.10
CLU550-3626C1-65AL7G4-B24
6500K
70
-
32,252 36,650
39,180
151
2,340
95.5
103.9
112.3
0.10
Notes :
1. Citizen Electronics maintains forward voltage +/-3%, luminous flux +/-10%,Ra and R9 +/-1.
*Values of Luminous flux at Tc=25C are provided as reference only.
*1170mA per channel
2-2. Absolute Maximum Ratings
Absolute Maximum Ratings
Rating
Parameter
Symbol
Channel 1 Channel 2
Input Power (W)
Forward Current (mA)
Reverse Current (mA)
Operating Temperature (C)
Storage Temperature (C)
Case Temperature (C)
Junction Temperature (C)
Pi
If
Ir
Top
Tst
Tc
Tj
Package
298
2340
298
595
*1*2
2340
4680
*1*2
1
1
1
*2
-40 ~ +100
-40 ~ +100
105
*3
140
*4
*1. Input power and forward current are the values per LED package when the LED is used within the range of
the derating curve in this data sheet and the same amount of current is applied to each channel
*2. At the time of power input to two channels
*3. Refer to 4. Outline drawing for Tc measurement point.
*4. D.C. Current : Tj = Tc + Rj-c × Pi
3
Ref.CE-P3326 09/15
2-3. Chromaticity Characteristics
( Rated current, Tj=85C )
Oval parameter
Color Region
3-step MacAdam ellipse
Color Region
ANSI C78. 377:2011
Nominal
CCT
Center Point
( x, y )
2700K
Major Axis
a
Minor Axis
b
( 0.4577 , 0.4098 )
0.00774
0.00411
Ellipse
Rotation Angle
θ
57.28
3000K
( 0.4339 , 0.4032 )
0.00834
0.00408
53.17
3500K
( 0.4078 , 0.3929 )
0.00951
0.00417
52.97
4000K
( 0.3818 , 0.3796 )
0.00939
0.00402
54.00
5000K
( 0.3446 , 0.3551 )
0.00822
0.00354
59.62
6500K
( 0.3123 , 0.3283 )
0.00669
0.00285
58.38
Nominal
CCT
Center Point
( x, y )
3000K
( 0.4339 , 0.4032 )
0.4561 0.4259 0.4302 0.4171 0.4149 0.3820 0.4373 0.3892
4000K
( 0.3818 , 0.3796 )
0.4003 0.4034 0.3737 0.3879 0.3671 0.3583 0.3895 0.3708
5000K
( 0.3446 , 0.3551 )
0.3550 0.3752 0.3375 0.3619 0.3366 0.3372 0.3514 0.3480
6500K
( 0.3123 , 0.3283 )
0.3205 0.3375 0.3027 0.3205 0.3067 0.3221 0.3221 0.3366
ANSI parameter
a
( x, y )
b
( x, y )
c
( x, y )
d
( x, y )
* Color region stay within MacAdam 3-step ellipse from the chromaticity center.
* The chromaticity center refers to ANSI C78.377:2011.
Please refer to ANSI C78. 377 for the chromaticity center.
* θ is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse.
(Ref. IEC 60081:1997 AnnexD)
x-y chart CIE1931
0.45
3,000K
2,700K
3,500K
Black
Body
Locus
4,000K
0.40
y
5,000K
0.35
6,500K
ANSI
3-step
0.30
0.30
0.35
0.40
x
0.45
0.50
Note : Citizen Electronics maintains chromaticity ( x, y ) +/-0.005
4
Ref.CE-P3326 09/15
3. Mechanical Dimensions
Unit : mm
Tolerances unless otherwise specified : +/-0.3
・Internal Circuit
channel 1
Marking 1 : Serial No.
Marking 2 : C 36 26 ** **
Anode 1
Protection
device
Cathode 1
LED device
CRI
36 s 13 p
CCT
channel 2
Dies count in parallel
*13 in parallel×2 channels
Anode 2
Dies count in series
Protection
device
Cathode 2
LED device
36 s 13 p
5
Ref.CE-P3326 09/15
4. Characteristic Curves
4-1. Forward Current Characteristics / Temperature Characteristics
Forward Current vs. Forward Voltage
Forward Current vs. Relative Luminous Flux
Tc=25C
Tc=25C
200%
110.0
180%
Relative Luminous Flux [a.u.]
120.0
Vf [V]
100.0
90.0
80.0
70.0
60.0
50.0
40.0
160%
140%
120%
100%
80%
60%
40%
20%
30.0
0%
0
1000
2000 3000
If [mA]
4000
5000
0
1000
*per LED package
2000 3000
If [mA]
5000
*per LED package
Case Temperature vs. Forward Voltage
Case Temperature vs. Relative Luminous Flux
If=2340mA
If=2340mA
*per LED package
*per LED package
120%
120.0
Relative Luminous Flux [a.u.]
110.0
100.0
Vf [V]
4000
90.0
80.0
70.0
60.0
50.0
40.0
100%
80%
60%
40%
20%
0%
30.0
0
25
50
Tc [C]
75
0
100
25
50
Tc [C]
75
100
6
Ref.CE-P3326 09/15
4-2. Optical Characteristics
Spectrum : CRI(Ra) 80Min.
Tj=85℃
If=2340mA
*1170mA per channel
6500K
5000K
4000K
3500K
3000K
2700K
100%
90%
Radiative Intensity
80%
70%
60%
50%
40%
30%
20%
10%
0%
380
430
480
530
580
630
Wave length [nm]
680
730
Tj=85℃
Spectrum : CRI(Ra) 70Min.
780
If=2340mA
*1170mA per channel
6500K
100%
5000K
4000K
3000K
90%
Radiative Intensity
80%
70%
60%
50%
40%
30%
20%
10%
0%
380
430
480
530
580
630
680
730
780
Wave length [nm]
7
Ref.CE-P3326 09/15
4-2. Optical Characteristics (continued)
Radiation Characteristic
-40°
-30°
-20°
10°
-10°
100%
-50°
20°
30°
40°
50°
80%
-60°
-70°
60%
60°
40%
70°
X
20%
-80°
Y
-90°
80°
90°
0%
4-3. Derating Characteristics
Case Temperature
vs. Allowable Forward Current
5000
4500
If [mA]
4000
3500
3000
2500
2000
1500
1000
500
0
0
25
50
75
Tc [C]
100
125
8
Ref.CE-P3326 09/15
5. Reliability
5-1. Reliability Test
Test Item
Test Condition
IF=2340mA*
Continuous Operation Test
Tc=25C (with Al-fin) ×1000hrs
IF=2340mA* Tj=140C (with Al-fin) ×1000hrs
Low Temperature Storage Test
-40 C × 1000 hours
High Temperature Storage Test
100 C × 1000 hours
Moisture-proof Test
85 C, 85 %RH for 500 hours
Thermal Shock Test
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
※1170mA per channel
5-2. Failure Criteria
( Tc=25C )
Measuring Item
Symbol
Measuring Condition
Failure Criteria
Forward Voltage
Vf
If=2340mA*
>U × 1.1
Total Luminous Flux
Φv
If=2340mA*
<S × 0.85
※1170mA per channel
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
9
Ref.CE-P3326 09/15
6. Packing Specification
6-1. Packing
An empty tray is placed on top of a 6-tier tray which contain 20 pieces each.
(Smallest packing unit: 120 pieces)
A label with product name, quantity and lot number is placed on the upper empty tray.
Tray (Dimensions: 310 x 210 x 12 mm / Materials: Electrically conductive PS)
Unit : mm
Product 20pcs/tray
Example of indication label
1. TYPE
e.g. CLU550-3626C1
2. P.No. ( Cutomer's P/N )
3. Lot No.
e.g.
CUSTOMER
TYPE
P.NO
Lot No
Q'ty
: CLU***-******-*******
: ******
: *******
: ***
--- ( 1 )
--- ( 2 )
--- ( 3 )
--- ( 4 )
1 5 5 5 0 0 1
(1) (2)
(3)
(1) Last two digit of the year
15 : year 2015
(2) Production month
5 : May
Note: October, November and December are designated X,Y and Z.
(3) CE's control number
4. Quantity
10
Ref.CE-P3326 09/15
7. Precaution
7-1. Handling with care for this product
-Both the light emitting area and white rim around the light emitting area is composed of resin materials.
Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail
(e.g. edge of reflector part) because the function, performance and reliability of this product are negatively impacted.
-Please be aware that this product should not come into contact with any other parts while incorporating in your lighting
apparatus or your other products.
-Please be aware that careful handling is required after the attachment of lead wires to prevent the application of any load
to the connections.
-For more information, please refer to application note "Instruction Manual(COB LED Package)".
7-2. Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity because this is a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced such as the wearing of a wristband or
anti-static gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine and conveyance unit)
should be connected to ground and please avoid the product to be electric-charged.
-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).
-After assembling the LEDs into your final product(s), it is recommended to check whether the assembled LEDs are
damaged by static electricity (electrical leak phenomenon) or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
7-3. Caution of product assembly
-Regarding this product assembling on the heat sink, it is recommended to use a connector.
In cases where M3 screw is used, it might be good for screw tightening on the heat sink to do temporary tightening and
final tightening with tightening torque of 0.4N・m.
In addition, please don’t press with excess stress on the product.
-The condition of the product assembling on the heat sink and the control of screw tightening torque needs to be optimized
according to the specification of the heat sink.
-Roughness, unevenness and burr of surface negatively impact thermal bonding between the product and heat sink and
increase heat thermal resistance between them.
Confidence of thermally and mechanical coupling between the product and heat sink are confirmed by checking
the mounting surface and measuring the case temperature of the product.
-In order to reduce the thermal resistance at assembly, it might be good to use grease as TIM (Thermal Interface Material)
on the whole contact surface of the product.
In case of using thermal grease for the TIM, it might be good to apply uniformly on the contact surface of the product.
In case of using thermal sheet for the TIM, it might be good to make sure that the product is NOT strained by stress when
the screws are tightened for assembly.
-For more information, please refer to application note "Instruction Manual(COB LED Package)".
11
Ref.CE-P3326 09/15
7-4. Thermal Design
-The thermal design to draw heat away from the LED junction is most critical parameter for an LED illumination system.
High operating temperatures at the LED junction adversely affect the performance of LED’s light output and lifetime.
Therefore the LED junction temperature should not exceed the absolute maximum rating in LED illumination system.
-Please be aware that this product should be used not to exceed the Tc limit.
-The LED junction temperature while operation of LED illumination system depends upon thermal resistance of internal
LED package (Rj-c), outer thermal resistances of LED package, power loss and ambient temperature. Please take both of
the thermal design specifications and ambient temperature conditions into consideration for the setting of driving
conditions.
-For more information, please refer to application note "Thermal Management", "Instruction Manual(COB LED
Package)".
7-5. Driving Current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products in series and control
the driving current to keep under the absolute maximum rating forward current value.
- This package shall be allowed for use only when each channel independently operates with one power source for one
channel. Neither series nor parallel connection that connects the two channels is allowed in the package.
- When different amount of current is applied to each channel, it is recommended that such difference is kept 10% or
smaller. However, some brightness variation can be produced between two channels even if the difference in current
between channels is 10% or smaller. For this reason, please conduct a sufficient verification using an apparatus.
-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).
They also affect negative impact on the product(s) therefore please make sure that no excess voltage, no excess current
and no reverse voltage is applied to the product(s) when the LED driver is turn-on and/or turn-off.
-If you desire to connect a driver in the series connection, it is required to contact a driver manufacturer beforehand to
check whether such a usage is acceptable. Also, please conduct a sufficient verification using an apparatus. Please be
aware that this product can be in excess of the working voltage range specified in the UL standard.
-For more information, please refer to application note "Driving", "Instruction Manual(COB LED Package)".
7-6. Lighting at a minimum current value
-In a case where the minimum current(IF min) is applied to the product, some of LED dice in the product might look
different in their brightness due to the individual difference of the LED dice, and they are not failed.
12
Ref.CE-P3326 09/15
7-7. Electrical Safety
-This product is designed and produced according to IEC 62031:2008
(IEC 62031:2008 LED modules for general lighting. Safety specification)
-Dielectric voltage withstand test has been conducted on this product to see any failure after applying
voltage between active pads and aluminum section of the product, and to pass at least 500V.
-Considering conformity assessment for IEC62031:2008, almost all items of the specification depend upon
your final product of LED illumination system.
Therefore, please confirm with your final product for electrical safety of your product.
As well, the products comply with the criteria of IEC62031:2008 as single LED package.
7-8. Recommended soldering Condition (This product is not adaptable to reflow process.)
-For manual soldering
Please use lead-free soldering.
Soldering shall be implemented using a soldering bit at a temperature lower than 350C, and shall be
finished within 3.5 seconds for one land.
No external force shall be applied to resin part while soldering is implemented.
Next process of soldering should be carried out after the product has return to ambient temperature.
Contacts number of soldering bit should be within twice for each terminal.
-Care should be taken to prevent solder from being spread across the electrodes of two channels.
* Citizen Electronics cannot guarantee if usage exceeds these recommended conditions.
Please use it after sufficient verification is carried out on your own risk if absolutely necessary.
-For more information, please refer to application note "Instruction Manual(COB LED Package)".
7-9. Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factors
that affect the risk group determination of the LED, and especially a high-power LED, that emits light
containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current, has multiple
uses as a module or when focusing the light with optical instruments, as these actions might greatly
increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
7-10. This product is not designed for usage under the following conditions.
If the product might be used under the following conditions, you shall evaluate its effect and appropriate them. In places
where the product might:
-directly and indirectly get wet due to rain and/or at place with the fear.
-be damage by seawater and/or at place with the fear
-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.
-be exposed to dust, fluid or oil and/or at place with the fear.
13
Ref.CE-P3326 09/15
Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as
intended. CITIZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or
completeness of the information contained in this document nor grants any license to any intellectual property rights or
any other rights of CITIZEN ELECTRONICS or any third party with respect to the information in this document.
(2) All information included in this document such as product data, diagrams, charts, is current as of the date this
document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document, please confirm the latest
product information with a CITIZEN ELECTRONICS' sales office, and formal specifications must be exchanged and
signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but
CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as a result of errors or omissions in
the information included in this document.
(4) Absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to
the maximum extent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including without
limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss
of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and
conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for
a particular purpose, accuracy of information, or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can
malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and
safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human
life, bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of use of any information contained in this
document such as application cases not only with evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained
in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
14
Ref.CE-P3326 09/15
and
are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN.
is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.
15
Ref.CE-P3326 09/15
Similar pages