Vishay NTCS0603E3124SMT Smd ntc thermistors with enhanced stability Datasheet

NTCS....E3...SMT
www.vishay.com
Vishay BCcomponents
SMD NTC Thermistors with Enhanced Stability
FEATURES
• Monolithic SMD with nickel barrier and pure tin
• Wide temperature range from - 40 °C to + 125 °C
• Enhanced stability throughout the lifetime
(maximum variation of initial R25 °C of ± 0.5 %
after 10 000 hours at any temperature)
• Ideal for wave and reflow soldering
• One R25 °C-value per case 0402, 0603, 0805
• Delivered on punched paper tape on reel
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
PARAMETER
VALUE
Resistance value at 25 °C
UNIT
100K to 210K

APPLICATIONS
1
%
3590
K
• All applications that require the utmost stability in time
(medical application, heat counting)
Tolerance on R25-value
B25/85-value
Tolerance on B25/85-value
±1
%
70 (0402), 120 (0603),
210 (0805)
mW
Response time (63.2 %)
25 °C to 750 °C still air
(for info by case)
4 (0402), 6 (0603),
10 (0805)
s
Dissipation factor 
in still air (for each case)
2 (0402), 3 (0603),
3.5 (0805)
mW/K
Operating temperature
range
- 40 to + 125
°C
DESIGN-IN SUPPORT
1 to 7
mg
For complete Curve Computation, visit:
www.vishay.com/resistors-non-linear/ntc-curve-list/
Maximum power
dissipation (by case)
Weight
MOUNTING
Please refer to information provided for generic NTCS serie.
PACKAGING
Available in 8 mm punched paper tape on reel package of
4000 units (case 0603 and 0805) and 10 000 (case 0402).
ELECTRICAL DATA AND ORDERING INFORMATION
VISHAY SAP
ORDERING NUMBER
R25-VALUE TOLERANCE ON R25 B25/85-VALUE B25/85-TOLERANCE
(k)
(K)
(%)
(%)
DESCRIPTION
NTCS0402E3214SMT
210
1
3590
±1
SMD NTC thermistor 0402 Ni barrier
NTCS0603E3124SMT
122
1
3590
±1
SMD NTC thermistor 0603 Ni barrier
NTCS0805E3104SMT
100
1
3590
±1
SMD NTC thermistor 0805 Ni barrier
DIMENSIONS in millimeters
W
T
PARAMETER
VALUE
Case
0402
0603
0805
W
0.5 ± 0.15
0.8 ± 0.15
1.25 ± 0.15
T
0.5 ± 0.15
0.8 ± 0.15
0.8 ± 0.15
L1, L3
0.1 min.
0.2 min.
0.2 min.
L2
0.3 min.
0.4 min.
0.55 min.
L
1 ± 0.15
1.6 ± 0.15
2 ± 0.2
L1
L
L2
L3
Note
• Non-dimensioned details do not affect the performance of the thermistors.
Revision: 28-Aug-13
Document Number: 29151
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS....E3...SMT
www.vishay.com
Vishay BCcomponents
RELIABILITY INFORMATION
After a test of storage at any temperature within the temperature range, the drift of electrical resistance at 25 °C is always lower
than ± 0.5 % (see here under typical figures for drift after storage during 10 000 h at maximal temperature 125 °C). The same
type of stability is also observed in thermal shocks between the two extreme values of the temperature range. The tests are
performed according to IEC 60068-2-2 and 2-14.
0.6
0.5
0.4
0.3
0.2
0.1
MAX measured dri
AVERAGE measured dri
dR25/R25(%) 0.0
MINIMUM measured dri
-0.1
NEGATIVE TRESHOLD
-0.2
POSITIVE TRESHOLD
-0.3
-0.4
-0.5
-0.6
0
2000
4000
6000
8000
10000
me (h)
Fig. 1 - R25 °C Drift after Storage at 125 °C for 0603 Case
0.6
0.5
0.4
0.3
0.2
MAX measured dri
0.1
AVERAGE measured dri
dR25/R25(%) 0.0
-0.1
MINIMUM measured dri
-0.2
NEGATIVE TRESHOLD
-0.3
POSITIVE TRESHOLD
-0.4
-0.5
-0.6
0
2000
4000
6000
8000
10000
me (h)
Fig. 2 - Drift in Storage at 125 °C for 0402 Case
Revision: 28-Aug-13
Document Number: 29151
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS....E3...SMT
www.vishay.com
Vishay BCcomponents
0.6
0.5
0.4
0.3
0.2
0.1
dR/R(%)
0.0
-0.1
-0.2
-0.3
-0.4
-0.5
-0.6
MIN DRIFT R25
MAX DRIFT R25
AVERAGE DRIFT R25
POSITIVE TRESHOLD
NEGATIVE TRESHOLD
0
250 500 750 1000 1250 1500 1750 2000
Nr cycles
Fig. 3 - R25 °C Drift in Thermal Shocks - 40 °C, 15 min/125 °C, 15 min
Revision: 28-Aug-13
Document Number: 29151
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages