ABRIDGED DATA SHEET EVALUATION KIT AVAILABLE MAX14740–MAX14742/ MAX20320 General Description The MAX14740—MAX14742/MAX20320 compact 6A smart power-path selector with reset control features a low 11mΩ (typ) RON internal FET and provides the system power from two separate power sources. The devices feature reset and disconnect functions to provide system power, reset, and disconnect based on multiple inputs, including MR1, MR2, and TAIN. The devices feature two individual enable inputs to control each power path. The MAX14740 enable function is provided through I2C control, while those of the MAX14741/ MAX14742//MAX20320 are performed by GPIO control. Each enable input controls the corresponding path as an independent switch. However, when both paths are enabled, the device can either autoselect the input source or have both inputs connected to the output. When autoselect is chosen, the internal comparator controls the path based on the voltage at the input nodes. The devices also feature an ultra-low supply current, even during an operating state or off state, providing longer battery life. The devices are available in 20-bump (1.6mm x 2.1mm) wafer-level packages (WLPs) and operate over the -40°C to +85°C extended temperature range. Applications ●● ●● ●● ●● Smart Phones Tablet PCs Cameras Game Console 19-7756; Rev 1; 7/16 Smart, Compact, 6A, Power-Path Selector with Reset Control Benefits and Features ●● Provides Robust Bidirectional Power Path • Wide Operating Input Voltage: +1.6V to +5.5V • 6A Continuous-Current Capability • Two Integrated 11mΩ (typ) MOSFET Switches ●● Flexible System Design with Battery Connect, Reset, and Disconnect • I2C Control: MAX14740 • Programmable Connect Time • Programmable Reset Setup Time • Programmable Reset Pulse Length • Programmable Disconnect Setup Time • Programmable Comparator Hysteresis • Programmable Input Autoselect ●● GPIO Control: MAX14741/MAX14742/MAX20320 • Programmable Comparator Hysteresis • Programmable Input Autoselect ●● Long Battery Life • Ultra-Low Quiescent Supply Current 7.5µA (typ) • Fast Switchover • Optimum Soft-Start Feature Ordering Information appears at end of data sheet. ABRIDGED DATA SHEET MAX14740–MAX14742/ MAX20320 Smart, Compact, 6A, Power-Path Selector with Reset Control Typical Application Circuits (continued) IN1 MAX14742/MAX20320 BATTERY 1 CHARGER OUT TA IN2 BATTERY 2 SYSTEM LOAD MR1 EN1 MR2 CONTROL HS GND AP OR PMIC EN2 TAIN DI OUT Ordering Information/Selector Guide PART COMMUNICATION COMPARATOR THRESHOLD OUT DISCHARGE ENABLE tDB PINPACKAGE MAX14740EWP+T I2C PROGRAMMABLE PROGRAMMABLE 2.5 sec 20 WLP MAX14741EWP+T GPIO 300mV/500mV NO 2.5 sec 20 WLP MAX14742EWP+T GPIO 200mV/400mV YES 2.5 sec 20 WLP MAX20320EWP+T GPIO 200mV/400mV +Denotes a lead(Pb)-free/RoHS-compliant package. YES 1 sec 20 WLP T = Tape and reel. Chip Information PROCESS: BiCMOS www.maximintegrated.com Package Information For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE OUTLINE NO. LAND PATTERN NO. 20 WLP W201G2+1 21-100016 Refer to Application Note 1891 Maxim Integrated │ 25