ON MCH6202-TL-E Bipolar transistor (-)30v, (-)1.5a, low vce(sat), (pnp)npn single mcph6 Datasheet

Ordering number : EN6480C
MCH6102/MCH6202
Bipolar Transistor
http://onsemi.com
(–)30V, (–)1.5A, Low VCE(sat), (PNP)NPN Single MCPH6
Applicaitons
•
Relay drivers, lamp drivers, motor drivers, flash
Features
•
•
•
•
• Large current capacity
Adoption of MBIT processes
• High-speed switching
Low collector-to-emitter saturation voltage
Ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm)
High allowable power dissipation
Specifications (
) : MCH6102
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Collector-to-Base Voltage
Collector-to-Emitter Voltage
VCBO
VCEO
Emitter-to-Base Voltage
VEBO
Conditions
Ratings
Unit
(--30)40
V
(--)30
V
(--)5
V
Continued on next page.
Package Dimensions
Product & Package Information
unit : mm (typ)
7022A-007
• Package
: MCPH6
• JEITA, JEDEC
: SC-88, SC-70-6, SOT-363
• Minimum Packing Quantity : 3,000 pcs./reel
6
5
4
0 to 0.02
1
2
3
0.65
TL
0.3
Marking
0.85
0.25
Packing Type: TL
4
MCPH6
AB
MCH6102
CB
LOT No.
5
3
LOT No.
6
2
LOT No.
1
1 : Collector
2 : Collector
3 : Base
4 : Emitter
5 : Collector
6 : Collector
LOT No.
0.07
MCH6102-TL-E
MCH6202-TL-E
0.15
2.1
1.6
0.25
2.0
MCH6202
Electrical Connection
1, 2, 5, 6
3
1, 2, 5, 6
3
4
MCH6102
4
MCH6202
Semiconductor Components Industries, LLC, 2013
September, 2013
91912 TKIM/D2005EA MSIM TB-00001962/D1004 TSIM TB-00000347/83100TS (KOTO) TA-2843 No.6480-1/7
MCH6102/MCH6202
Continued from preceding page.
Parameter
Symbol
Collector Current
Conditions
Ratings
Unit
IC
ICP
(--)1.5
(--)300
Collector Dissipation
IB
PC
Junction Temperature
Tj
Storage Temperature
Tstg
Collector Current (Pulse)
Base Current
A
(--)3
When mounted on ceramic substrate (600mm2×0.8mm)
A
mA
1.0
W
150
°C
--55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Collector Cutoff Current
Ratings
Conditions
min
typ
Unit
max
ICBO
IEBO
VCB=(--)30V, IE=0A
(--)0.1
μA
VEB=(--)4V, IC=0A
(--)0.1
μA
VCE=(--)2V, IC=(--)100mA
Gain-Bandwidth Product
hFE
fT
Output Capacitance
Cob
Collector-to-Emitter Saturation Voltage
VCE(sat)
VBE(sat)
Emitter Cutoff Current
DC Current Gain
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
560
VCE=(--)10V, IC=(--)300mA
(450)500
VCB=(--)10V, f=1MHz
IC=(--)750mA, IB=(--)15mA
(9)8
IC=(--)750mA, IB=(--)15mA
IC=(--)10μA, IE=0A
V(BR)CBO
V(BR)CEO
Collector-to-Emitter Breakdown Voltage
200
MHz
pF
(--250)150
(--375)225
(--)0.85
(--)1.2
mV
V
(--30)40
V
V
IC=(--)1mA, RBE=∞
(--)30
V(BR)EBO
ton
IE=(--)10μA, IC=0A
(--)5
tstg
tf
See specified Test Circuit.
V
(37)35
ns
(115)205
ns
(26)32
ns
Switching Time Test Circuit
IB1
IB2
OUTPUT
INPUT
RB
VR
+
PW=20μs
D.C.≤1%
50Ω
100μF
VBE= --5V
RL=16Ω
+
470μF
VCC=12V
IC=20IB1= --20IB2=750mA
For PNP, the polarity is reversed.
Ordering Information
Package
Shipping
MCH6102-TL-E
MCPH6
3,000pcs./reel
MCH6202-TL-E
MCPH6
3,000pcs./reel
IC -- VCE
Collector Current, IC -- A
--8mA
--6mA
--1.6
--50mA
--40mA
--30mA
--1.2
--0.8
--4mA
--2mA
--0.4
IB=0mA
0
--200
--400
--600
IC -- VCE
2.0
--20mA
--15mA
--10mA
0
Pb Free
--800
Collector-to-Emitter Voltage, VCE -- mV
--1000
IT01872
MCH6202
30mA
50
MCH6102
Collector Current, IC -- A
--2.0
memo
mA
Device
1.6
20mA
8mA
40mA
15mA
10mA
1.2
6mA
4mA
0.8
2mA
0.4
0
0
IB=0mA
200
400
600
800
Collector-to-Emitter Voltage, VCE -- mV
1000
IT01873
No.6480-2/7
MCH6102/MCH6202
--0.6
25°C
--25°C
--0.4
0.4
0
0
--0.2
--0.4
--0.6
--0.8
Base-to-Emitter Voltage, VBE -- V
--1.0
0
DC Current Gain, hFE
25°C
--25°C
100
7
5
--25°C
100
7
5
3
2
7 --0.1
2
3
5
7 --1.0
Collector Current, IC -- A
2
2
--100
7
C
75°
Ta=
5°C
--2
3
25°C
2
--10
--0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
Collector Current, IC -- A
5
2
--100
Ta
5
°C
=75
--25
3
25°C
°C
2
5
7 --0.1
2
3
5
Collector Current, IC -- A
7 --1.0
2
3
IT01880
2
3
IT01877
3
2
100
7
°C
75
5
=
Ta
3
25°C
C
5°
--2
2
2
3
5
7 0.1
2
3
5
7 1.0
2
3
IT01879
VCE(sat) -- IC
MCH6202
IC / IB=50
7
7
7 1.0
MCH6202
IC / IB=20
1000
3
3
5
Collector Current, IC -- A
VCE(sat) -- IC
2
3
VCE(sat) -- IC
IT01878
MCH6102
IC / IB=50
--10
--0.01
2
5
10
0.01
3
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
7
2
7 0.1
7
3
5
5
Collector Current, IC -- A
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
5
3
1000
MCH6102
IC / IB=20
7
2
IT01876
VCE(sat) -- IC
--1000
--1000
10
0.01
3
25°C
2
2
5
Ta=75°C
3
3
3
1.0
IT01875
MCH6202
VCE=2V
5
3
2
0.8
7
Ta=75°C
10
--0.01
0.6
hFE -- IC
1000
7
2
0.4
Base-to-Emitter Voltage, VBE -- V
MCH6102
VCE= --2V
5
0.2
IT01874
hFE -- IC
1000
DC Current Gain, hFE
0.6
0.2
0
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
0.8
--25°C
--0.8
1.0
C
--1.0
1.2
Ta=75
°
Collector Current, IC -- A
--1.2
--0.2
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
MCH6202
VCE=2V
1.4
Ta=7
5°C
Collector Current, IC -- A
--1.4
IC -- VBE
1.6
MCH6102
VCE= --2V
25°C
IC -- VBE
--1.6
5
3
2
100
5°C
7
7
Ta=
5
--25
3
25°C
°C
2
10
0.01
2
3
5
7 0.1
2
3
5
Collector Current, IC -- A
7 1.0
2
3
IT01881
No.6480-3/7
MCH6102/MCH6202
VBE(sat) -- IC
MCH6102
IC / IB=50
7
5
3
2
--1000
75°C
25°C
3
2
--100
--0.01
2
3
5
7 --0.1
2
3
5
7 --1.0
2
Collector Current, IC -- A
Output Capacitance, Cob -- pF
Output Capacitance, Cob -- pF
5
3
2
10
7
5
3
2
3
5
7 --1.0
2
3
5
7 --10
2
Collector-to-Base Voltage, VCB -- V
2
2
3
5
7 0.1
2
3
5
7 1.0
2
3
IT01883
Cob -- VCB
MCH6202
f=1MHz
2
100
7
5
3
2
10
7
5
7
5
3
2
100
7
5
3
2
3
5
7
2
--0.1
3
2
3
5
Collector Current, IC -- A
5
7 1.0
2
3
--1.0
IT01886
op
0m
s
2
100
7
5
3
2
3
5
7
2
0.1
1ms
on
3
2
0.1
MCH6102 / MCH6202
Ta=25°C
Single pulse
For PNP, minus sign is omitted.
Mounted on a ceramic board (600mm2✕0.8mm)
0.01
0.1
2
3
5 7 1.0
2
3
5 7 10
2
5
7 1.0
IT01887
MCH6102 / MCH6202
1.2
s
ati
3
PC -- Ta
1.4
er
5
3
Collector Current, IC -- A
Collector Dissipation, PC -- W
7
5
m
3
IT01885
5
2
0.01
7
s
0μ
10
s
0μ
50
DC
1.0
10
2
MCH6202
VCE=10V
7
ICP=3A
10
7 10
f T -- IC
1000
ASO
IC=1.5A
5
Collector-to-Base Voltage, VCB -- V
IT01884
MCH6102
VCE= --10V
2
--0.01
Collector Current, IC -- A
3
2
0.1
5
Gain-Bandwidth Product, f T -- MHz
Gain-Bandwidth Product, f T -- MHz
3
f T -- IC
1000
2
25°C
3
2
--0.1
3
75°C
5
3
7
7
5
Ta= --25°C
7
5
100
2
2
Collector Current, IC -- A
MCH6102
f=1MHz
2
3
3
IT01882
3
5
5
100
0.01
3
Cob -- VCB
5
MCH6202
IC / IB=50
7
1000
Ta= --25°C
7
5
VBE(sat) -- IC
10000
Base-to-Emitter
Saturation Voltage, VBE(sat) -- mV
Base-to-Emitter
Saturation Voltage, VBE(sat) -- mV
--10000
M
1.0
ou
0.8
nte
do
na
0.6
ce
ram
ic
0.4
bo
ard
(6
00
mm
2
✕0
0.2
.8m
m)
0
3
Collector-to-Emitter Voltage, VCE -- V
5 7 100
IT01888
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT01889
No.6480-4/7
MCH6102/MCH6202
Embossed Taping Specification
MCH6102-TL-E, MCH6202-TL-E
No.6480-5/7
MCH6102/MCH6202
Outline Drawing
MCH6102-TL-E, MCH6202-TL-E
Land Pattern Example
Mass (g) Unit
0.008 mm
* For reference
Unit: mm
2.1
0.6
0.4
0.65 0.65
No.6480-6/7
MCH6102/MCH6202
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.6480-7/7
Similar pages