YAGEO AA0201FR-131R5 Anti-sulfurated chip resistors automotive grade Datasheet

DATA SHEET
ANTI-SULFURATED CHIP RESISTORS
AUTOMOTIVE GRADE
AA series
±5%, ±1%, ±0.5%
sizes 0201/0402/0603/0805/1206/
1210/1218/2010/2512
Product specification –December 08, 2015 V.3
RoHS compliant & Halogen free
2
Product specification
Chip Resistor Surface Mount
SCOPE
This specification describes AA0201
to AA2512 chip resistors with leadfree terminations made by thick film
process.
AA
10
0201 to 2512
SERIES
ORDERING INFORMATION - GLOBAL PART NUMBER
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
GLOBAL PART NUMBER
AA XXXX X X X XX XXXX L
APPLICATIONS
 Car electronics

Engine control unit

Body control system

Safety devices
FEATURES
 Superior resistance against sulfur
containing atmosphere

AEC-Q200 qualified

Moisture sensitivity level: MSL1

AA series soldering is compliant
with J-STD-020D

Halogen free epoxy

RoHS compliant

Reduce environmentally
hazardous waste

High component and equipment
reliability

The resistors are 100% performed
by automatic optical inspection
(1)
(2) (3) (4)
(5)
(6)
(7)
(1) SIZE
0201 / 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
(2) TOLERANCE
D =± 0.5%
F = ± 1%
J = ± 5% (for Jumper ordering, use code of J)
(3) PACKAGING TYPE
R = Paper/PE taping reel
K = Embossed taping reel
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(5) TAPING REEL
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
(6) RESISTANCE VALUE
1Ω to 10 MΩ
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
Resistance rule of global part
number
Resistance coding
Example
rule
XRXX
(1 to 9.76 Ω)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
976R = 976 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
XXMX
(10 MΩ)
O RDERING EXAMPLE
The ordering code for an AA0402 chip
resistor, value 100 KΩ with ±1%
tolerance, supplied in 7-inch tape reel is:
AA0402FR-07100KL
NOTE
1. All our R-Chip products are RoHS
compliant and Halogen free. "LFP" of the
internal 2D reel label states "Lead-Free
Process".
2. On customized label, "LFP" or specific
symbol can be printed.
10M = 10,000,000 Ω
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
3
10
0201 to 2512
MARKING
AA0201 / AA0402
No marking
Fig. 1
AA0603 / AA0805 / AA1206 / AA1210 / AA2010 / AA2512
E-24 series: 3 digits, ± 5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 2
Value=10 KΩ
AA0603
E-24 series: 3 digits, ± 1%
One short bar under marking letter
Fig. 3
Value = 24 Ω
E-96 series: 3 digits, ± 1%
First two digits for E-96 marking rule and 3rd letter for number of zeros
Fig. 4
Value = 12.4 KΩ
AA0805 / AA1206 / AA1210 / AA2010 / AA2512
Both E-24 and E-96 series: 4 digits, ± 1%
First three digits for significant figure and 4th digit for number of zeros
Fig. 5 Value = 10 KΩ
AA1218
E-24 series: 3 digits, ± 5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 6 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits, ± 1%
First three digits for significant figure and 4th digit for number of zeros
Fig. 7 Value = 10 KΩ
NOTE
For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AA series is the same as RC series.
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
CONSTRUCTION
The resistors are constructed on top of an automotive
grade ceramic body. Internal metal electrodes are
added at each end and connected by a resistive glaze.
The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the
approximately required resistance value and laser
trimming of this resistive glaze achieves the value within
tolerance. The whole element is covered by a protective
overcoat. Size 0603 and bigger is marked with the
resistance value on top. Finally, the two external
terminations (Ni / matte tin) are added, as shown in Fig.8.
SERIES
4
10
0201 to 2512
OUTLINES
Fig. 8 Chip resistor outlines
DIMENSIONS
Table 1 For outlines, please refer to Fig. 9
TYPE
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
AA0201
0.60 ± 0.03
0.30 ± 0.03
0.23 ± 0.03
0.12 ± 0.05
0.15 ± 0.05
AA0402
1.00 ± 0.05
0.50 ± 0.05
0.32 ± 0.05
0.20 ± 0.10
0.25 ± 0.10
AA0603
1.60 ± 0.10
0.80 ± 0.10
0.45 ± 0.10
0.25 ± 0.15
0.25 ± 0.15
AA0805
2.00 ± 0.10
1.25 ± 0.10
0.50 ± 0.10
0.35 ± 0.20
0.35 ± 0.20
0.55 ± 0.10
0.45 ± 0.20
0.40 ± 0.20
0.50 ± 0.10
0.45 ± 0.15
0.50 ± 0.20
0.40 ± 0.20
AA1206
AA1210
3.10 ± 0.10
3.10 ± 0.10
1.60 ± 0.10
2.60 ± 0.15
AA1218
3.10 ± 0.10
4.60 ± 0.10
0.55 ± 0.10
0.45 ± 0.20
AA2010
5.00 ± 0.10
2.50 ± 0.15
0.55 ± 0.10
0.55 ± 0.15
0.50 ± 0.20
AA2512
6.35 ± 0.10
3.10 ± 0.15
0.55 ± 0.10
0.60 ± 0.20
0.50 ± 0.20
For dimension, please refer to Table 1
AA0201 / AA0402
AA0603/0805/1206/
1210/2010/2512
AA1218
Side view for all type
Fig. 9 Chip resistor dimensions
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
5
10
0201 to 2512
ELECTRICAL CHARACTERISTICS
Table 2
CHARACTERISTICS
Operating
Max.
Max.
Dielectric
RESISTANCE
RANGE Temperature Range Working Overload Withstanding
Voltage
Voltage
Voltage
TYPE
Temperature
Coefficient
of Resistance
1Ω ≤ R ≤ 10Ω ,
AA0201
25V
50V
50V
-100/+400 ppm/°C
10Ω < R ≤ 10 MΩ ,
± 300 ppm/°C
AA0402
AA0603
AA0805
5% (E24)
1Ω≤ R ≤ 22MΩ
(0201: Max. 10MΩ.
1218: Max. 1MΩ)
0.5%, 1% (E24/E96)
1Ω≤ R ≤10MΩ
(1218: Max. 1MΩ)
Jumper < 50mΩ
50 V
100 V
100 V
75V
150 V
150 V
150 V
300 V
300 V
200 V
400 V
500 V
AA1210
200 V
500 V
500 V
AA1218
200 V
500 V
500 V
AA2010
200 V
500 V
500 V
AA2512
200 V
500 V
500 V
AA1206
–55 °C to +155 °C
Jumper Criteria
Rated Current 0.5A
Max. Current 1.0A
Rated Current
1A
Max. Current
2A
Rated Current
1A
Max. Current
2A
Rated Current
2A
Max. Current
5A
± 200 ppm/°C Rated Current
2A
1 Ω ≤ R ≤ 10 Ω ,
10 Ω < R ≤ 10 MΩ ,
Max. Current 10A
± 150 ppm/°C Rated Current
10 MΩ < R ≤ 22 M
2A
Max. Current 10A
Ω , ± 200 ppm/°C Rated Current
6A
Max. Current 10A
Rated Current
2A
Max. Current 10A
Rated Current
2A
Max. Current 10A
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
6
10
0201 to 2512
FOOTPRINT AND SOLDERING PROFILES
Recommended footprint and soldering profiles. Please refer to data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
Paper/PE taping reel
(R)
REEL AA0201 AA0402
DIMENSION
AA0603 AA0805 AA1206 AA1210 AA1218 AA2010 AA2512
7" (178 mm)
10,000
10,000
5,000
5,000
5,000
5,000
---
---
---
13" (330 mm)
50,000
50,000
20,000
20,000
20,000
20,000
---
---
---
Embossed
taping 7" (178 mm)
reel (K) RESISTANCE
---
---
---
---
---
---
4,000
4,000
4,000
TEMPERATURE COEFFICIENT OF RESISTANCE
R
A
N
G
E
NOTE
1.
For paper/PE/embossed tape and 100
reel mΩ
specifications/dimensions,
to 910 mΩ
please refer to data sheet “Chip resistors packing”.
PT040
2
± 200 ppm/°C
PT060
± 200 ppm/°C
3
FUNCTIONAL DESCRIPTION
PT080
OPERATING TEMPERATUR±E200
RAppm/°C
NGE
5
100
MΩ
TO
910
MΩ
Range: -55 °C to +155 °C
PT120
100 mΩ
6
POWER RATING
PT201
Each type rated power at 70± °C:
100 ppm/°C
0
AA0201=1/20W (0.05W)
AA0402=1/16 W (0.0625W)
PT251
± 100 ppm/°C
AA0603=1/10 W (0.1W)
2
AA0805=1/8 W (0.125W)
AA1206=1/4 W (0.25W)
AA1210=1/2 W (0.5W)
AA1218=1 W
AA2010=3/4 W (0.75W)
AA2512=1 W
> 100 mΩ
± 75 ppm/°C
± 75 ppm/°C
Fig. 10 Maximum dissipation (P max) in percentage of rated power
as a function of the operating ambient temperature (T amb)
R ATED VOLTAGE
The DC or AA (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V = √(P X R)
Or Maximum working voltage whichever is less
Where
V = Continuous rated DC or AA (rms) working voltage (V)
P = Rated power (W)
R = Resistance value (Ω)
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
7
10
0201 to 2512
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
High Temperature
Exposure
AEC-Q200 Test 3
Moisture
Resistance
AEC-Q200 Test 6
1,000 hours at TA = 155 °C, unpowered
MIL-STD-202 Method 108
MIL-STD-202 Method 106
REQUIREMENTS
± (1.0%+0.05Ω)
<50 mΩ for Jumper
Each temperature / humidity cycle is defined at
8 hours (method 106F), 3 cycles / 24 hours for
10d. with 25 °C / 65 °C 95% R.H, without steps
7a & 7b, unpowered
± (0.5%+0.05Ω) for D/F tol.
± (2.0%+0.05Ω) for J tol.
<100 mΩ for Jumper
Parts mounted on test-boards, without
condensation on parts
Biased
Humidity
AEC-Q200 Test 7
MIL-STD-202 Method 103
1,000 hours; 85 °C / 85% RH
10% of operating power
± (3.0%+0.05Ω)
<100 mΩ for Jumper
Measurement at 24± 4 hours after test conclusion.
Operational Life
Resistance to
Soldering Heat
Thermal Shock
AEC-Q200 Test 8
± (1.0%+0.05Ω)
MIL-STD-202 Method 108
1,000 hours at 125 °C, derated voltage applied for
1.5 hours on, 0.5 hour off, still-air required
AEC-Q200 Test 15
Condition B, no pre-heat of samples
± (0.5%+0.05Ω) for D/F tol.
MIL-STD-202 Method 210
Lead-free solder, 260± 5 °C, 10± 1 seconds
immersion time
± (1.0%+0.05Ω) for J tol.
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
AEC-Q200 Test 16
-55/+125 °C
± (1.0%+0.05Ω)
MIL-STD-202 Method 107
Number of cycles is 300. Devices mounted
<50 mΩ for Jumper
<100 mΩ for Jumper
<50 mΩ for Jumper
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
ESD
AEC-Q200 Test 17
1 pos. + 1 neg. discharges
± (3.0%+0.05Ω)
AEC-Q200-002
0201: 500V
<50 mΩ for Jumper
0402/0603: 1KV
0805 and above: 2KV
www.yageo.com
Dec. 08 2015 V.3
8
Product specification
Chip Resistor Surface Mount
AA
SERIES
10
0201 to 2512
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
AEC-Q200 Test 18
Electrical Test not required Magnification 50X
Well tinned (≥95% covered)
J-STD-002
SMD conditions:
No visible damage
(a) Method B, aging 4 hours at 155 °C dry heat,
dipping at 235± 3 °C for 5± 0.5 seconds.
(b) Method B, steam aging 8 hours, dipping at
215± 3 °C for 5± 0.5 seconds.
(c) Method D, steam aging 8 hours, dipping at
260± 3 °C for 7± 0.5 seconds.
Board Flex
AEC-Q200 Test 21
AEC-Q200-005
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
Bending for 0201/0402: 5 mm
0603/0805: 3 mm
1206 and above: 2 mm
± (1.0%+0.05Ω )
<50 mΩ for Jumper
Holding time: minimum 60 seconds
Temperature
Coefficient of
Resistance (T.C.R.)
IEC 60115-1 4.8
MIL-STD-202 Method 304
At +25/–55 °C and +25/+125 °C
Refer to table 2
Formula:
R2–R1
T.C.R= ------------------------- × 106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Short Time
Overload
IEC60115-1 4.13
FOS
2.5 times of rated voltage or maximum
overload voltage whichever is less for 5 sec
at room temperature
± (1.0%+0.05Ω )
ASTM-B-809-95
- Sulfur (saturated vapor) 1000 hours,
90±2 °C unpowered
± (1.0%+0.05Ω)
ASTM-B-809-95*
*Modified
- Sulfur 750 hours, 105 °C. unpowered
± (4.0%+0.05Ω)
<50 mΩ for Jumper
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
0201 to 2512
9
10
REVISION HISTORY
REVISION
DATE
CHANGE NOTIFICATION
DESCRIPTION
Version 3
Dec. 08, 2015
-
- Update Dielectric Withstanding Voltage
Version 2
Apr. 09, 2015
-
- Modified FOS test procedure
Version 1
Jan. 27, 2015
-
- Dimensions update
Version 0
Feb. 27, 2014
-
- First issue of this specification
www.yageo.com
Dec. 08 2015 V.3
Product specification
Chip Resistor Surface Mount
AA
SERIES
0201 to 2512
10
10
LEGAL DISCLAIMER
Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaim s any and all liabilities for any errors,
inaccuracies or incompleteness contained in any product related information, including but not limited to
product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
improvements to product related information at any time and without notice.
Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
purpose or the continuing production of any of its products. To the m aximum extent permitted by law, Yageo
disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and a ll implied
warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.
Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a
specific customer application or use. They are intended fo r use only by customers with requisite knowledge and
experience for determining whether Yageo products are the correct products for their application or use. In
addition, unpredicatable and isolated cases of product failure may still occur, therefore, cust omer application or
use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
safeguard measures to ensure that product failure would not result in personal injury or property damage.
Yageo products are not designed for application or use in medical, life -saving, or life-sustaining devices or for
any other application or use in which the failure of Yageo products could result in personal injury or death.
Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
revising this content without further notification, as long as products are unchanged. Any product change will
be announced by PCN.
www.yageo.com
Dec. 08 2015 V.3
Similar pages