NTC Type JI Thermometrics Double Insulated Chip Thermistor with Insulated Wires Features • Waterproof to IP68 • Withstands freeze/thaw cycling • Available using any device in the Thermometrics standard NK and DC95 ranges • Range of wire lengths 11.81 in to 196.85 in (300 mm to 5000 mm) (dimension WL on page 2) • Suitable for refrigeration applications, including evaporators Amphenol Advanced Sensors Type JI Specifications Description 0.197 in (5 mm) Ø Maximum Chip thermistor housed in a tip, which is molded onto flexible circular cable. Tip and outer cable insulation material is thermoplastic elastomer. Tinned copper conductors have individual polyolefin insulation. 0.787 in (20 mm) Nominal Options 0.138 in (3.5 mm) Ø Maximum • Other resistance – temperature characteristics • Other wire lengths WL Data • • • • Temperature range: -40°F to 221°F (-40°C to 105°C) Insulation resistance: >100 MW at 500 VDC Wire conductors: 7 X 0.23 mm diameter (0.30 mm2) Resistance - temperature characteristics: Refer to NK and DC95 data sheets NTC Type JI dimensions Ordering Information The code number to be ordered may be specified as follows: Code Type JI Double Insulated With Insulated Wires Code Type 103C1R2 NK103C1R2 See NK or DC95 Data sheets F103W DC95F103W Code Wire Length WL in mm L301 300 ± 10 L501 500 ± 10 L751 750 ± 20 L102 1000 ± 20 L152 1500 ± 25 L202 2000 ± 25 L252 2500 ± 50 L302 3000 ± 50 L352 3500 ± 50 L402 4000 ± 50 L452 4500 ± 50 L502 5000 ± 50 JI - ____ - ____ Typical model number Resistance characteristic and wire length are specified by the product code: e.g. JI103C1R2 or JIF103W Other wire lengths are available for quantities > 5000 pieces as above with a wire tolerance at > 3.28 ft (1 m) of +100 /- 0 mm (+3.9 in /- 0 in) Amphenol Advanced Sensors www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-350A-04/2014