API MM43MPG-10 Double balanced mixer Datasheet

Double Balanced Mixer
Model MM4xxG-10
Multi-Octave Band
RF 2.0 to 8.0 GHz
Electrical Specifications: (1)
Specifications
Conditions
Parameter
SSB Conversion
loss: (2) (3)
RF (GHz)
2.0-8.0
2.0-8.0
2.0-8.0
Isolation
LO to RF:
LO to IF:
RF to IF:
Input 1 dB
Compression Point:
2.0-8.0
2.0-8.0
Input Third Order
Intercept Point:
LO Power: (4)
LO (GHz)
2.0-8.0
2.0-8.0
2.0-8.0
IF (MHz)
DC-500
DC-1200
DC-1500
2.0-8.0
2.0-3.0
3.0-8.0
2.0-8.0
DC-1500
2.0-8.0
2.0-8.0
DC-1500
2.0-8.0
2.0-8.0
DC-1500
Min
Typical
5.4 dB
6.4 dB
6.7 dB
25 dB
18 dB
25 dB
33 dB
24 dB
34 dB
22 dB
+1 dBm
+4 dBm
+8 dBm
+12 dBm
+11 dBm
+14 dBm
+18 dBm
+22 dBm
+7 dBm
+10 dBm
+14 dBm
+19 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C
with the nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
MM4xxG-10
Outline: G
Max
7.5 dB
8.5 dB
9.0 dB
MM43
MM44
MM46
MM47
MM43
MM44
MM46
MM47
MM43
MM44
MM46
MM47
Model MM4xxG-10
LO Power
3 = +7 dBm
4 = +10 dBm
6 = +14 dBm
7 = +19 dBm
Drop-In Module or
With SMA(F)
Connectors
M = Module
P = With Connectors
Typical
Performance
at 25˚C
“MG” WITHOUT CONNECTORS
“PG” WITH REMOVABLE CONNECTORS
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Rev.
2/8/07
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
Similar pages