PAIRUI DNV10-2411 Dc-dc converter Datasheet

DC-DC Converter
DIP-Package
DNV-10 SERIES, 10WATT, 2:1 INPUT RANGE
FEATURES:
3 years warranty
1500Vac isolation voltage
Six-side shielded metal case with low ripple and noise
Operating temperature range -40°C to +85°C
Over voltage, over current, short circuit protection
Output voltage
(Vdc)
Output current
(mA)
Efficiency
Typ.
DNV10-1211
3.3
3000
85%
DNV10-1212
5.1
2000
87%
12.1
800
87%
DNV10-1214
15.1
700
89%
DNV10-1215
24.2
400
89%
DNV10-2411
3.3
3000
87%
DNV10-2412
5.1
2000
88%
12.1
800
89%
DNV10-2414
15.1
700
90%
DNV10-2415
24.2
400
90%
DNV10-4811
DNV10-4812
DNV10-4813
DNV10-4814
DNV10-4815
DNV10-11011
DNV10-11012
DNV10-11013
DNV10-11014
3.3
3000
87%
5.1
2000
89%
12.1
800
89%
15.1
700
90%
24.2
400
90%
5.1
2000
89%
12.1
800
89%
15.1
700
90%
24.2
400
90%
Model
DNV10-1213
DNV10-2413
Input voltage
(Vdc)
12(9~18)
24(18~36)
48(36~72)
110(66~160)
Notes:
1.Other input and output models may available on request;
2.You may request for the models with heatsink, plus “R” in the suffix, e.g. DNV10-1211R.
ELECTRICAL
Output voltage accuracy
---
Line regulation
Nominal Load, full voltage
±0.2% max.
Load regulation
20% ~ 100% rated load
±0.5% max.
Dynamic response
(transient/recovery time)
www.pairuigroup.com
≤1%
5%-50%-75% load capability
Page: 1 / 4
∆Vo/∆t: ±5.0%/500μs
Date: 12/18/2013
DC-DC Converter
DIP-Package
DNV-10 SERIES, 10WATT, 2:1 INPUT RANGE
ELECTRICAL
Ripple and noise
20MHz BM, full load
Isolation voltage
(<2mA/min)
1% Vout max.
Input to output
1500Vac
Input to case
1000Vac
Output to case
500Vac
Isolation resistance
500Vdc
20MΩ
Temperature coefficient
---
Operating temperature range
Auxiliary heat sink
Storage temperature range
---
-45°C to +120°C
Over current protection
---
Auto-recovery
Short circuit protection
---
Continuous auto-recovery
Over voltage protection
---
Auto-recovery
Relative humidity
---
10%-90% max.
Weight
---
20g
Conducted emission
---
CLASS A
MTBF
Bellcore TR-332, 25°C
2x105Hrs
±0.02%/°C max.
-40°C to +85°C
Notes: Unless otherwise specified, all the parameters of the test conditions are as follows: ambient temperature
25 , the nominal input voltage, pure resistive nominal load.
℃
MECHANICAL
WITHOUT HEATSINK
www.pairuigroup.com
WITH HEATSINK
Page: 2 / 4
Date: 12/18/2013
DC-DC Converter
DIP-Package
DNV-10 SERIES, 10WATT, 2:1 INPUT RANGE
MECHANICAL
CONNECTION
PCB LAYOUT
PIN #
SINGLE
1
+Vin
2
-Vin
3
+Vo
4
No Pin
5
GND
Note:
* Unit is mm(inch).
TEMPERATURE PROFILE
CAPACITIVE LOADS SELECTION
Vout: 3.3V 5V
Vout: 12V 5V
Vout: 24V
Recommended
MAX.
Recommended
MAX.
Recommended
MAX.
value
value
value
value
value
value
10000μF
15000μF
1000μF
2200μF
470μF
1000μF
www.pairuigroup.com
Page: 3 / 4
Date: 12/18/2013
DC-DC Converter
DIP-Package
DNV-10 SERIES, 10WATT, 2:1 INPUT RANGE
NOTES
RECOMMENDED TEST AND APPLICATION CIRCUIT
1. TVS&FUSE will be helpful with over voltage protection and inrush limiting. Recommended FUSE should better be
1.5~2times of the rated current ;
2. The input filter capacitor C6 could select the aluminum electrolytic capacitors or tantalum capacitors, and the
withstand voltage should be greater than the highest input voltage. Recommended capacitor should be between
22μF~100μF;
3. C1,C2 for the input filter capacitor, 0.1~1μF high-frequency ceramics capacitor or chip capacitor are recommended.
The withstand voltage of output filter C5, C7 should be greater than the highest output voltage. Recommended
capacitor of C7 should within 100μF and C5 connected with the chip to reduce the input voltage peak, recommended
0.1~1μF high-frequency ceramics capacitor or chip capacitor.
www.pairuigroup.com
Page: 4 / 4
Date: 12/18/2013
Similar pages