Vishay MKP386M268250KT6 Metallized polypropylene film capacitor Datasheet

MKP386M Snubber
www.vishay.com
Vishay Roederstein
Metallized Polypropylene Film Capacitor
Radial Snubber Type
FEATURES
• Reduce EMI by clamping voltage and current
ringing
• High pulse strength (dV/dt up to 2500 V/μs)
• Low inductance construction (low ESL)
• Low ESR
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
Photovoltaic and wind inverters
Motor drives
Frequency converters
Direct mount on IGBT modules
QUICK REFERENCE DATA
Rated capacitance range
0.047 μF to 10 μF
Capacitance tolerance
± 5 %/± 10 %
Rated (DC) voltage, UNDC
700 V, 850 V, 1000 V, 1250 V, 1600 V, 2000 V, 2500 V
Climatic testing class
55/105/56
Rated temperature
85 °C
Maximum permissible case temperature
105 °C
Rated (AC) voltage
420 V, 400 V to 450 V, 425 V to 500 V, 450 V to 550 V, 450 V to 600 V, 700 V, 800 V
Reference standards
IEC 60384-17
Dielectric
Polypropylene film
Electrodes
Metallized film
Construction
Series construction
Encapsulation
Flame retardant plastic case and epoxy resin sealed
Terminals
Tinned coated copper
Self inductance (LS)
< 0.7 nH per mm of lead spacing
Withstanding DC voltage between terminals (1)
1.6 URDC for 60 s (maximum rise time 1000 V/s; cut off current 10 mA)
Test voltage between terminals and case
1.4 URAC + 2000 VDC for 60 s
Insulation resistance
RC between leads, at 500 V after 1 min:
> 100 G for C  0.33 μF
> 30 000 s for C > 0.33 μF
Performance grade
Grade 1 (long life)
Stability grade
Grade 2
Life time expectancy
Operation life > 300 000 h - failure rate < 5 FIT (40 °C and 0.5 x UR)
C-value, tolerance code, rated voltage, manufacturer’s emblem, code for dielectric
material, manufacturer’s type designation, year and week, manufacturer’s location
Marking
Notes
• For more detailed data and test requirements contact [email protected]
• For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147
(1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169)
DC VOLTAGE RATINGS
URDC
700 VDC
850 VDC
1000 VDC
1250 VDC
1600 VDC
2000 VDC
2500 VDC
URAC
420 VAC
450 VAC
500 VAC
550 VAC
600 VAC
700 VAC
800 VAC
Revision: 11-Jun-15
Document Number: 28170
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
DIMENSIONS in millimeters AND AVAILABLE TERMINAL VERSIONS
T2
P1
0.8 ± 0.05
6 ± 0.1
6 ± 0.1
D
6.8 ± 1
P2
P2
D
14 min.
8.2 ± 1
0.8 ± 0.05
8.2 ± 1
15 ± 1
14 min.
P1
6.8 ± 1
T1
15 ± 1
6±1
6±1
h
h
l
l
w
L
44
58
T3
P1
P2
± 0.5 ± 0.5
28
23
43
38
w
D
min.
10.2
25.2
L
44
58
15 ± 0.3
T4
P1
P2
± 0.5 ± 0.5
24.5 19.5
39.5 34.5
D
min.
6.2
21.2
3 ± 0.5
0.5
5 ± 0.5
0.5
h
w
l
W
l
13.5 ± 0.2
h
A
A
L
33.5
44
58
10 ± 0.3
P1
T5
P1
± 0.5
47
57
72
A
±1
57
67
82
D
L
44
58
T6
P1
P2
P1
P2
± 0.5 ± 0.5
28
22
43
37
D
min.
11
26
A
± 0.5
38
53
P1
P2
15 ± 0.3
7.5 ± 0.5
D
15 ± 0.3
0.8 ± 0.1
3 ± 1.0
l
33.5
44
58
P1
±1
32.3
42.3
57.3
P2
±1
22.7
32.7
47.7
D
min.
11
21
36
3.2 ± 1.0
3 ± 1.0
w
h
1 ± 0.1
6.3 ± 0.1
14.5 ± 1
3.2 ± 1.0
L
7.5 ± 0.5
D
6.3 ± 0.1
14.5 ± 1
Revision: 11-Jun-15
6 ± 0.1
5 ± 0.2
5 ± 0.2 6 ± 0.2
P1
P2
w
h
l
L
44
58
P1
±1
32.3
47.3
P2
±1
22.7
37.7
D
min.
11
26
Document Number: 28170
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
DIMENSIONS in millimeters AND AVAILABLE TERMINAL VERSIONS
T7
T8
P1
P1
P2
P2
15 ± 0.3
15 ± 0.3
8 ± 0.2
D
8 ± 0.2
D
0.8 ± 0.1
1 ± 0.1
6.3 ± 0.1
6.3 ± 0.1
12.8 max.
12.8 max.
18 ± 1
18 ± 1
3.5 ± 1.0
3.5 ± 1.0
h
h
w
l
L
33.5
44
58
P1
±1
32.3
42.3
57.3
P2
±1
22.7
32.7
47.7
w
l
D
min.
11
21
36
P1
±1
32.3
47.3
L
44
58
P2
±1
22.7
37.7
D
min.
11
26
COMPOSITION OF CATALOG NUMBER
MULTIPLIER
(nF)
TOLERANCE
Example
4 68 = 680 nF
TYPE
MKP
386
2
0.1
3
1
4
10
5
100
M
4
±5%
K
± 10 % L = 33.5 mm/44.0 mm
L = 33.5 mm/44.0 mm
Y
±5%
L = 58 mm
CAPACITANCE
(numerically)
68
160
J
T8
SPECIAL CODE FOR TERMINAL
METALLIZED
POLYPROPYLENE
DRAWING
MINI VERSION SINGLE
METALLIZED
T1
VOLTAGE
T2
L
(mm)
P1
(mm)
P2
(mm)
44
28 ± 0.5
23 ± 0.5
58
43 ± 0.5
38 ± 0.5
44
24.5 ± 0.5
19.5 ± 0.5
58
39.5 ± 0.5
34.5 ± 0.5
33.5
47 ± 0.5
-
44
57 ± 0.5
-
1000 VDC
58
72 ± 0.5
-
125
1250 VDC
44
28 ± 0.5
22 ± 0.5
160
1600 VDC
200
2000 VDC
250
2500 VDC
070
700 VDC
085
850 VDC
100
T3
T4
T5
T6
T7
T8
Revision: 11-Jun-15
J
58
43 ± 0.5
37 ± 0.5
33.5
32.3 ± 1
22.7 ± 1
44
42.3 ± 1
32.7 ± 1
58
57.3 ± 1
47.7 ± 1
44
32.3 ± 1
22.7 ± 1
58
47.3 ± 1
37.7 ± 1
33.5
32.3 ± 1
22.7 ± 1
44
42.3 ± 1
32.7 ± 1
58
57.3 ± 1
47.7 ± 1
44
32.3 ± 1
22.7 ± 1
58
47.3 ± 1
37.7 ± 1
DRAWING
Document Number: 28170
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
URDC
(V)
700
850
1000
CAP.
(μF)
DIMENSION (mm) (4)
W
H
L
0.47
0.68
1.0
1.5
2.0
2.2
3.0
3.3
4.0
4.7
5.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
30.0
30.0
30.5
30.5
30.5
30.5
38.0
38.0
46.0
46.0
46.0
46.0
46.0
0.47
0.68
0.82
1.0
1.5
2.0
2.2
3.0
3.3
4.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
4.7
5.0
6.0
7.0
8.0
10
dU/dt
(V/μs)
Ipeak
(A)
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
44.0
800
800
800
800
370
370
370
370
370
370
370
376
544
800
1200
740
814
1110
1221
1480
1739
1850
30.5
30.5
30.5
30.5
38.0
38.0
38.0
46.0
46.0
46.0
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
800
800
800
800
370
370
370
370
370
370
376
544
656
800
555
740
814
1110
1221
1480
25.0
25.0
30.0
30.0
35.0
35.0
45.0
45.0
45.0
45.0
50.0
50.0
58.0
58.0
58.0
58.0
58.0
58.0
170
170
170
170
170
170
798
849
1019
1189
1358
1698
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.0
2.2
2.5
2.7
3.3
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
30.0
30.0
30.5
30.5
30.5
30.5
30.5
38.0
38.0
38.0
46.0
46.0
46.0
46.0
46.0
33.5
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
725
725
725
725
725
340
340
340
340
340
340
340
340
341
406
493
595
725
408
510
612
680
748
850
918
1122
3.3
4.0
4.7
5.0
6.0
7.0
25.0
25.0
30.0
30.0
35.0
35.0
45.0
45.0
45.0
45.0
50.0
50.0
58.0
58.0
58.0
58.0
58.0
58.0
205
205
205
205
205
205
677
820
964
1025
1230
1435
Revision: 11-Jun-15
IRMS (2)
(A)
ESR (3)
(mΩ)
tan 
1 kHz
< (10-4)
URAC = 420 V; Upp = 1130 V
7.0
16.0
4.0
8.0
11.0
4.0
9.0
7.5
4.0
10.0
5.0
4.0
10.0
7.5
5.0
10.0
6.5
5.0
14.0
5.5
5.0
14.0
5.0
5.0
15.0
4.5
5.0
15.0
6.0
5.0
15.0
6.0
5.0
URAC = 450 V; Upp = 1300 V
7.5
13.0
4.0
8.5
10.0
4.0
9.0
8.5
4.0
10.0
7.0
4.0
10.0
9.0
5.0
12.0
7.0
5.0
13.0
6.0
5.0
16.0
4.5
5.0
16.0
4.0
5.0
18.0
3.5
5.0
URAC = 400 V; Upp = 1200 V
17.5
4.0
6.0
18.0
3.5
6.0
20.5
3.0
6.0
22.5
2.5
6.0
26.0
2.0
6.0
29.0
1.5
6.0
URAC = 500 V; Upp = 1400 V
7.5
13.0
4.0
8.0
11.0
4.0
9.0
9.0
4.0
9.0
7.5
4.0
10.0
6.0
4.0
10.0
10.0
5.0
11.0
8.0
5.0
12.0
6.5
5.0
14.0
6.0
5.0
15.0
5.5
5.0
15.0
5.0
5.0
16.0
4.5
5.0
18.0
3.5
5.0
URAC = 425 V; Upp = 1200 V
16.0
4.5
7.5
17.5
3.5
7.5
20.0
3.0
7.5
21.0
3.0
7.5
24.5
2.5
7.5
26.5
2.0
7.5
tan 
10 kHz
< (10-4)
tan 
100 kHz
< (10-4)
ORDERING CODE (1)
8.0
8.0
8.0
8.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
50
50
50
-
MKP386M447070J**
MKP386M468070J**
MKP386M510070J**
MKP386M515070J**
MKP386M520070J**
MKP386M522070J**
MKP386M530070J**
MKP386M533070J**
MKP386M540070J**
MKP386M547070J**
MKP386M550070J**
8.0
8.0
8.0
8.0
15.0
15.0
15.0
15.0
15.0
15.0
50
50
50
50
-
MKP386M447085J**
MKP386M468085J**
MKP386M482085J**
MKP386M510085J**
MKP386M515085J**
MKP386M520085J**
MKP386M522085J**
MKP386M530085J**
MKP386M533085J**
MKP386M540085J**
25
25
25
25
25
25
-
MKP386M547085Y**
MKP386M550085Y**
MKP386M560085Y**
MKP386M570085Y**
MKP386M580085Y**
MKP386M610085Y**
8.0
8.0
8.0
8.0
8.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
50
50
50
50
50
-
MKP386M447100J**
MKP386M456100J**
MKP386M468100J**
MKP386M482100J**
MKP386M510100J**
MKP386M512100J**
MKP386M515100J**
MKP386M518100J**
MKP386M520100J**
MKP386M522100J**
MKP386M525100J**
MKP386M527100J**
MKP386M533100J**
25
25
25
25
25
25
-
MKP386M533100Y**
MKP386M540100Y**
MKP386M547100Y**
MKP386M550100Y**
MKP386M560100Y**
MKP386M570100Y**
Document Number: 28170
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
URDC
(V)
1250
1600
2000
CAP.
(μF)
DIMENSION (mm) (4)
W
H
L
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.0
2.2
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
30.0
30.5
30.5
30.5
30.5
30.5
38.0
38.0
38.0
46.0
46.0
46.0
46.0
2.2
2.5
3.0
3.3
4.0
4.7
5.0
25.0
25.0
25.0
30.0
35.0
35.0
35.0
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.3
1.5
1.8
2.0
dU/dt
(V/μs)
Ipeak
(A)
33.5
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
44.0
800
800
800
800
800
375
375
375
375
375
375
375
264
312
376
448
544
308
375
450
563
675
750
825
45.0
45.0
45.0
45.0
50.0
50.0
50.0
58.0
58.0
58.0
58.0
58.0
58.0
58.0
225
225
225
225
225
225
225
495
563
675
743
900
1058
1125
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
30.0
30.5
30.5
30.5
30.5
30.5
38.0
38.0
38.0
38.0
46.0
46.0
46.0
46.0
33.5
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
44.0
44.0
800
800
800
800
800
375
375
375
375
375
375
375
375
176
216
264
312
376
210
255
308
375
488
563
675
750
1.5
2.0
2.2
2.5
25.0
30.0
35.0
35.0
45.0
45.0
50.0
50.0
58.0
58.0
58.0
58.0
360
360
360
360
540
720
792
900
0.047
0.068
0.10
0.12
0.15
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.68
0.82
1.0
1.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
25.0
25.0
30.0
35.0
30.5
30.5
30.5
30.5
30.5
38.0
38.0
38.0
38.0
46.0
46.0
46.0
45.0
45.0
45.0
50.0
33.5
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
44.0
58.0
58.0
58.0
58.0
2000
2000
2000
2000
2000
850
850
850
850
850
850
850
525
525
525
525
94
136
200
240
300
187
230
281
332
400
476
578
357
431
525
788
Revision: 11-Jun-15
tan 
1 kHz
< (10-4)
URAC = 550 V; Upp = 1550 V
7.0
16.0
4.0
7.0
14.0
4.0
8.0
11.0
4.0
8.5
10.0
4.0
9.5
8.0
4.0
9.0
13.0
5.0
10.0
10.0
5.0
11.0
9.0
5.0
14.0
7.0
5.0
15.0
6.0
5.0
16.0
5.5
5.0
18.0
4.5
5.0
URAC = 450 V; Upp = 1300 V
14.0
6.0
7.5
15.0
5.0
7.5
16.5
4.0
7.5
18.0
4.0
7.5
21.5
3.0
7.5
23.5
2.5
7.5
24.5
2.5
7.5
URAC = 600 V; Upp = 1690 V
7.0
16.0
3.0
7.0
15.0
3.0
8.0
12.0
3.0
8.5
10.0
3.0
9.0
8.5
3.0
9.0
14.0
4.0
9.0
12.0
4.0
10.0
10.0
4.0
12.0
8.0
4.0
16.0
6.0
4.0
16.0
5.5
4.0
18.0
4.5
4.0
19.0
4.0
4.0
URAC = 450 V; Upp = 1300 V
18.0
3.5
5.0
22.0
2.5
5.0
25.0
2.5
5.0
26.5
2.0
5.0
URAC = 700 V; Upp = 1980 V
6.0
20.0
3.0
6.5
17.0
3.0
8.0
11.0
3.0
9.0
9.0
3.0
9.5
8.0
3.0
10.0
10.0
4.0
11.0
8.5
4.0
12.0
7.0
4.0
12.0
6.0
4.0
16.0
5.0
4.0
18.0
4.0
4.0
20.0
3.5
4.0
14.0
6.0
5.0
15.5
5.0
5.0
18.0
4.0
5.0
24.0
2.5
5.0
IRMS (2)
(A)
ESR (3)
(mΩ)
tan 
10 kHz
< (10-4)
tan 
100 kHz
< (10-4)
ORDERING CODE (1)
8.0
8.0
8.0
8.0
8.0
15.0
15.0
15.0
15.0
15.0
15.0
15.0
40
40
40
40
40
60
60
-
MKP386M433125J**
MKP386M439125J**
MKP386M447125J**
MKP386M456125J**
MKP386M468125J**
MKP386M482125J**
MKP386M510125J**
MKP386M512125J**
MKP386M515125J**
MKP386M518125J**
MKP386M520125J**
MKP386M522125J**
20
20
20
20
20
20
20
-
MKP386M522125Y**
MKP386M525125Y**
MKP386M530125Y**
MKP386M533125Y**
MKP386M540125Y**
MKP386M547125Y**
MKP386M550125Y**
5.0
5.0
5.0
5.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
40
40
40
40
40
60
60
60
60
-
MKP386M422160J**
MKP386M427160J**
MKP386M433160J**
MKP386M439160J**
MKP386M447160J**
MKP386M456160J**
MKP386M468160J**
MKP386M482160J**
MKP386M510160J**
MKP386M513160J**
MKP386M515160J**
MKP386M518160J**
MKP386M520160K**
15
15
15
15
-
MKP386M515160Y**
MKP386M520160Y**
MKP386M522160Y**
MKP386M525160Y**
5.0
5.0
5.0
5.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
30
30
30
30
30
50
50
50
50
50
50
50
75
75
-
MKP386M347200J**
MKP386M368200J**
MKP386M410200J**
MKP386M412200J**
MKP386M415200J**
MKP386M422200J**
MKP386M427200J**
MKP386M433200J**
MKP386M439200J**
MKP386M447200J**
MKP386M456200J**
MKP386M468200J**
MKP386M468200Y**
MKP386M482200Y**
MKP386M510200Y**
MKP386M515200Y**
Document Number: 28170
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
URDC
(V)
2500
CAP.
(μF)
DIMENSION (mm) (4)
W
H
L
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.33
0.39
0.47
0.47
0.56
0.68
0.82
22.0
22.0
22.0
22.0
22.0
22.0
22.0
30.0
30.0
30.0
25.0
30.0
35.0
35.0
30.5
30.5
30.5
30.5
38.0
38.0
38.0
46.0
46.0
46.0
45.0
45.0
50.0
50.0
33.5
33.5
33.5
33.5
44.0
44.0
44.0
44.0
44.0
44.0
58.0
58.0
58.0
58.0
dU/dt
(V/μs)
Ipeak
(A)
2500
2500
2500
2500
1000
1000
1000
1000
1000
1000
795
795
795
795
118
170
250
300
150
180
220
330
390
470
374
445
541
652
tan 
1 kHz
< (10-4)
URAC = 800 V; Upp = 2260 V
6.0
20.0
3.0
7.0
14.0
3.0
8.5
10.0
3.0
9.5
8.0
3.0
9.5
12.5
4.0
10.0
11.0
4.0
11.0
8.5
4.0
15.0
6.0
4.0
16.0
5.0
4.0
18.0
4.0
4.0
15.0
5.5
5.0
17.0
4.5
5.0
20.5
4.0
5.0
22.5
3.0
5.0
IRMS (2)
(A)
ESR (3)
(mΩ)
tan 
10 kHz
< (10-4)
tan 
100 kHz
< (10-4)
ORDERING CODE (1)
5.0
5.0
5.0
5.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
30
30
30
30
50
50
50
50
50
50
75
75
75
75
MKP386M347250J**
MKP386M368250J**
MKP386M410250J**
MKP386M412250J**
MKP386M415250J**
MKP386M418250J**
MKP386M422250J**
MKP386M433250J**
MKP386M439250J**
MKP386M447250J**
MKP386M447250Y**
MKP386M456250Y**
MKP386M468250Y**
MKP386M482250Y**
Notes
(1) Change the symbol ** according special code for the terminals (see Packaging Information table)
(2) Maximum RMS current at 100 kHz, + 85 °C
(3) The ESR (Equivalent Series Resistance) typical values at 100 kHz
(4) Standard dimension
PACKAGING INFORMATION
URDC
(V)
700
850
CAP.
(μF)
ORDERING CODE (1)
MASS
(g)
0.47
0.68
1.0
1.5
2.0
2.2
3.0
3.3
4.0
4.7
5.0
0.47
0.68
0.82
1.0
1.5
2.0
2.2
3.0
3.3
4.0
4.7
5.0
6.0
7.0
8.0
10
MKP386M447070J**
MKP386M468070J**
MKP386M510070J**
MKP386M515070J**
MKP386M520070J**
MKP386M522070J**
MKP386M530070J**
MKP386M533070J**
MKP386M540070J**
MKP386M547070J**
MKP386M550070J**
MKP386M447085J**
MKP386M468085J**
MKP386M482085J**
MKP386M510085J**
MKP386M515085J**
MKP386M520085J**
MKP386M522085J**
MKP386M530085J**
MKP386M533085J**
MKP386M540085J**
MKP386M547085Y**
MKP386M550085Y**
MKP386M560085Y**
MKP386M570085Y**
MKP386M580085Y**
MKP386M610085Y**
41
39
38
35
59
57
91
89
86
82
80
40
39
38
36
60
56
55
88
86
86
79
78
93
90
121
114
Revision: 11-Jun-15
TERMINAL AVAILABLE - SPQ (pcs)
T1
T2
42
42
63
63
63
63
63
42
42
63
63
63
63
63
42
42
42
63
63
63
50
50
45
45
35
35
42
42
42
63
63
63
50
50
45
45
35
35
T3
48
48
48
48
36
36
54
54
54
54
54
48
48
48
48
36
36
36
54
54
54
48
48
40
40
36
36
T4
42
42
63
63
63
63
63
42
42
42
63
63
63
55
55
45
45
40
40
T5
48
48
48
48
36
36
60
60
60
60
60
48
48
48
48
36
36
36
60
60
60
55
55
45
45
40
40
T6
42
42
63
63
63
63
63
42
42
42
63
63
63
55
55
45
45
40
40
T7
55
55
55
55
36
36
60
60
60
60
60
55
55
55
55
36
36
36
60
60
60
50
50
45
45
35
35
T8
42
42
63
63
63
63
63
42
42
42
63
63
63
50
50
45
45
35
35
Document Number: 28170
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
PACKAGING INFORMATION
URDC
(V)
1000
1250
1600
CAP.
(μF)
ORDERING CODE (1)
MASS
(g)
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.0
2.2
2.5
2.7
3.3
3.3
4.0
4.7
5.0
6.0
7.0
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.0
2.2
2.2
2.5
3.0
3.3
4.0
4.7
5.0
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.3
1.5
1.8
2.0
1.5
2.0
2.2
2.5
MKP386M447100J**
MKP386M456100J**
MKP386M468100J**
MKP386M482100J**
MKP386M510100J**
MKP386M512100J**
MKP386M515100J**
MKP386M518100J**
MKP386M520100J**
MKP386M522100J**
MKP386M525100J**
MKP386M527100J**
MKP386M533100J**
MKP386M533100Y**
MKP386M540100Y**
MKP386M547100Y**
MKP386M550100Y**
MKP386M560100Y**
MKP386M570100Y**
MKP386M433125J**
MKP386M439125J**
MKP386M447125J**
MKP386M456125J**
MKP386M468125J**
MKP386M482125J**
MKP386M510125J**
MKP386M512125J**
MKP386M515125J**
MKP386M518125J**
MKP386M520125J**
MKP386M522125J**
MKP386M522125Y**
MKP386M525125Y**
MKP386M530125Y**
MKP386M533125Y**
MKP386M540125Y**
MKP386M547125Y**
MKP386M550125Y**
MKP386M422160J**
MKP386M427160J**
MKP386M433160J**
MKP386M439160J**
MKP386M447160J**
MKP386M456160J**
MKP386M468160J**
MKP386M482160J**
MKP386M510160J**
MKP386M513160J**
MKP386M515160J**
MKP386M518160J**
MKP386M520160K**
MKP386M515160Y**
MKP386M520160Y**
MKP386M522160Y**
MKP386M525160Y**
39
39
38
37
35
60
58
56
92
90
88
86
81
78
75
90
89
119
114
40
39
38
37
36
60
59
56
91
88
86
84
81
79
76
93
123
119
116
40
39
38
37
35
61
59
57
54
87
84
79
76
75
87
119
115
Revision: 11-Jun-15
TERMINAL AVAILABLE - SPQ (pcs)
T1
T2
42
42
42
63
63
63
63
63
50
50
45
45
35
35
42
42
42
63
63
63
63
63
50
50
45
45
35
35
42
42
42
63
63
63
63
50
50
50
45
35
35
35
42
42
42
63
63
63
63
50
50
50
45
35
35
35
42
42
42
42
63
63
63
63
50
45
35
35
42
42
42
42
63
63
63
63
50
45
35
35
T3
48
48
48
48
48
36
36
36
54
54
54
54
54
48
48
40
40
36
36
48
48
48
48
48
36
36
36
54
54
54
54
48
48
48
40
36
36
36
48
48
48
48
48
36
36
36
36
54
54
54
54
48
40
36
36
T4
42
42
42
63
63
63
63
63
55
55
45
45
40
40
42
42
42
63
63
63
63
55
55
55
45
40
40
40
42
42
42
42
63
63
63
63
55
45
40
40
T5
48
48
48
48
48
36
36
36
60
60
60
60
60
55
55
45
45
40
40
48
48
48
48
48
36
36
36
60
60
60
60
55
55
55
45
40
40
40
48
48
48
48
48
36
36
36
36
60
60
60
60
55
45
40
40
T6
42
42
42
63
63
63
63
63
55
55
45
45
40
40
42
42
42
63
63
63
63
55
55
55
45
40
40
40
42
42
42
42
63
63
63
63
55
45
40
40
T7
55
55
55
55
55
36
36
36
60
60
60
60
60
50
50
45
45
35
35
55
55
55
55
55
36
36
36
60
60
60
60
50
50
50
45
35
35
35
55
55
55
55
55
36
36
36
36
60
60
60
60
50
45
35
35
T8
42
42
42
63
63
63
63
63
50
50
45
45
35
35
42
42
42
63
63
63
63
50
50
50
45
35
35
35
42
42
42
42
63
63
63
63
50
45
35
35
Document Number: 28170
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
PACKAGING INFORMATION
URDC
(V)
2000
2500
CAP.
(μF)
ORDERING CODE (1)
MASS
(g)
0.047
0.068
0.10
0.12
0.15
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.68
0.82
1.0
1.5
0.047
0.068
0.10
0.12
0.15
0.18
0.22
0.33
0.39
0.47
0.47
0.56
0.68
0.82
MKP386M347200J**
MKP386M368200J**
MKP386M410200J**
MKP386M412200J**
MKP386M415200J**
MKP386M422200J**
MKP386M427200J**
MKP386M433200J**
MKP386M439200J**
MKP386M447200J**
MKP386M456200J**
MKP386M468200J**
MKP386M468200Y**
MKP386M482200Y**
MKP386M510200Y**
MKP386M515200Y**
MKP386M347250J**
MKP386M368250J**
MKP386M410250J**
MKP386M412250J**
MKP386M415250J**
MKP386M418250J**
MKP386M422250J**
MKP386M433250J**
MKP386M439250J**
MKP386M447250J**
MKP386M447250Y**
MKP386M456250Y**
MKP386M468250Y**
MKP386M482250Y**
41
40
39
38
37
61
59
57
55
90
87
82
78
75
89
112
40
39
37
36
61
59
57
88
85
80
74
89
119
113
TERMINAL AVAILABLE - SPQ (pcs)
T1
T2
42
42
42
42
63
63
63
50
50
45
35
42
42
42
42
63
63
63
50
50
45
35
42
42
42
63
63
63
50
45
35
35
42
42
42
63
63
63
50
45
35
35
T3
48
48
48
48
48
36
36
36
36
54
54
54
48
48
40
36
48
48
48
48
36
36
36
54
54
54
48
40
36
36
T4
42
42
42
42
63
63
63
55
55
45
40
42
42
42
63
63
63
55
45
40
40
T5
48
48
48
48
48
36
36
36
36
60
60
60
55
55
45
40
48
48
48
48
36
36
36
60
60
60
55
45
40
40
T6
42
42
42
42
63
63
63
55
55
45
40
42
42
42
63
63
63
55
45
40
40
T7
55
55
55
55
55
36
36
36
36
60
60
60
50
50
45
35
55
55
55
55
36
36
36
60
60
60
50
45
35
35
T8
42
42
42
42
63
63
63
50
50
45
35
42
42
42
63
63
63
50
45
35
35
Note
(1) Change the ** symbol according special code for the terminals
CONSTRUCTION
Low inductive wound cells elements of metallized
polypropylene film, potted with resin in flame retardant case.
Series construction for 420 VAC to 600 VAC versions build in
case width  44 mm and 450 VAC to 550 VAC versions build
in case width > 44 mm.
Triple construction for 700 VAC and 800 VAC versions build
in case width  44 mm and 550 VAC to 700 VAC versions
build in case width > 44 mm.
MKP metallized polypropylene
MKP metallized polypropylene
Metal spray layer
Metal spray layer
Revision: 11-Jun-15
Series construction with 4 sections for 800 VAC versions
build in case width > 44 mm.
Document Number: 28170
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
MOUNTING
SOLDERING CONDITIONS
Normal Use
Storage Temperature
The capacitors are designed for mounting on printed-circuit
boards or IGBT or GTO modules.
Tstg = - 25 °C to + 35 °C with RH maximum 75 % without
condensation.
Specific Method of Mounting to Withstand Vibration
and Shock
Ratings and Characteristics Reference Conditions
In order to withstand vibration and shock tests, the
capacitors shall be mechanically fixed by tabs it must be
ensured that the tabs are screwed tightly on the test board.
When the weight of the capacitor is bigger than 50 g it needs
a clamp in the body of the capacitor.
Unless otherwise specified, all electrical values apply to an
ambient temperature of 23 °C ± 1 °C, an atmospheric
pressure of 86 kPa to 106 kPa and a relative humidity of
50 % ± 2 %.
For reference testing, a conditioning period shall be applied
over 96 h ± 4 h by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20 %.
4
Z (Ω)
ΔC/C (%)
CHARACTERISTICS
3
100
Box length 33.5 mm
Box length 44.0 mm
Box length 57.5 mm
2
10
1
0
-1
1
1 μF
-2
-3
4 μF
0.1
-4
10 μF
-5
-6
- 60
- 40
- 20
0
20
40
60
0.01
10 000
100
80
Tamb (°C)
Capacitance as a function of ambient temperature
(typical curve)
Z (Ω)
Z (Ω)
1 000 000
10 000 000
f (Hz)
Impedance as a function of frequency
(typical curve)
factor
10.00
100 000
1.2
1.0
1.00
0.8
0.10
0.6
0.4
0.01
5 µF
0.00
10 000
100 000
0.2
2 µF
1 000 000
f (Hz)
10 000 000
Impedance as function of frequency for box length 44.0 mm
(typical curve)
Revision: 11-Jun-15
0
- 60
- 20
20
60
100
Tamb (°C)
Max. DC and AC voltage as a function of temperature
Document Number: 28170
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
108
ΔT (°C)
RC (s)
CHARACTERISTICS
16
14
12
10
8
106
6
4
2
104
0
20
0
40
60
80
- 60
100
- 40
- 20
0
20
40
60
80
100
Tamb (°C)
Tamb (°C)
Insulation resistance as a function of ambient temperature
(typical curve)
Maximum allowed component temperature rise (T)
as function of the ambient temperature (Tamb)
1000
Capacitance in μF
0.47
1.0
2.2
4.7
100
AC Voltage (V)
AC Voltage (V)
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
1000
85 °C < Tamb ≤ 105 °C, 700 VDC
0.47
1.0
2.2
4.7
100
Tamb ≤ 85 °C, 700 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
100
1000
10 000
100 000
1000
Capacitance in μF
0.47
1.0
2.2
4.0
5.0
10
100
1 000 000
f (Hz)
AC Voltage (V)
AC Voltage (V)
f (Hz)
1000
85 °C < Tamb ≤ 105 °C, 850 VDC
0.47
1.0
2.2
4.0
5.0
10
100
Tamb ≤ 85 °C, 850 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
f (Hz)
Revision: 11-Jun-15
100
1000
10 000
100 000
1 000 000
f (Hz)
Document Number: 28170
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
1000
Capacitance in μF
0.47
1.0
1.5
3.3
4.7
7.0
100
AC Voltage (V)
AC Voltage (V)
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
1000
85 °C < Tamb ≤ 105 °C, 1000 VDC
0.47
1.0
1.5
3.3
4.7
7.0
100
Tamb ≤ 85 °C, 1000 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
100
1000
10 000
100 000
1000
Capacitance in μF
0.39
0.68
1.5
2.2
3.0
4.7
100
1000
85 °C < Tamb ≤ 105 °C, 1250 VDC
0.39
0.68
1.5
2.2
3.0
4.7
100
Tamb ≤ 85 °C, 1250 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
100
1000
10 000
100 000
1000
Capacitance in μF
0.22
0.47
1.0
1.5
2.0
2.5
100
1 000 000
f (Hz)
AC Voltage (V)
f (Hz)
AC Voltage (V)
1 000 000
f (Hz)
AC Voltage (V)
AC Voltage (V)
f (Hz)
1000
85 °C < Tamb ≤ 105 °C, 2000 VDC
0.047
0.10
0.22
0.47
0.68
1.5
100
Tamb ≤ 85 °C, 1600 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
f (Hz)
Revision: 11-Jun-15
100
1000
10 000
100 000
1 000 000
f (Hz)
Document Number: 28170
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
1000
AC Voltage (V)
AC Voltage (V)
MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY
Capacitance in μF
0.047
0.10
0.22
0.47
0.68
1.5
100
1000
85 °C < Tamb ≤ 105 °C, 2000 VDC
0.047
0.10
0.22
0.47
0.68
1.5
100
Tamb ≤ 85 °C, 2000 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
100
1000
10 000
100 000
1000
Capacitance in μF
0.047
0.10
0.15
0.33
0.47
0.82
100
1 000 000
f (Hz)
AC Voltage (V)
AC Voltage (V)
f (Hz)
1000
85 °C < Tamb ≤ 105 °C, 2500 VDC
0.047
0.10
0.15
0.33
0.47
0.82
100
Tamb ≤ 85 °C, 2500 VDC
Capacitance in μF
10
10
100
1000
10 000
100 000
1 000 000
100
1000
IRMS operational/IRMS max.
f (Hz)
10 000
100 000
1 000 000
f (Hz)
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
60
70
80
90
100
110
Maximum Ambient Temperature (°C)
Maximum IRMS current in function of the ambient temperature
Revision: 11-Jun-15
Document Number: 28170
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
MARKING
Printing Example:
Product Marking and Identification
The capacitor is marked by laser print or stamp, with
following information:
1. Manufacturer’s logo
VISHAY
5μF J
386M
F0825
2. Code for dielectric material (MKP)
3. Manufacturer’s type designation (386)
4. Single metallized (M)
5. Rated capacitance value (5 μF)
6. Tolerance on rated capacitance (J = ± 5 %)
700V
MKP
7. Rated DC voltage (700 V)
8. Code for factory of origin (F)
9. Year and week of manufacture (e.g. 0825)
Packing Bar Code Label
Label Example:
1.
2.
3.
4.
5.
Manufacturer’s logo
Country of origin
Sub family
Type description
Capacitance value, tolerance, voltage and climatic
category according to IEC 60068-1
6. Production center
7. Preference origin code: A
Country of origin in code
8. Product type description
9. Batch number
10. Quantity and production date, year week code
11. Product code
HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY
THICKNESS IN mW/°C
Wmax. (mm)
HEAT CONDUCTIVITY (mW/°C)
BOX LENGTH 33.5 mm
BOX LENGTH 44.0 mm
22
75
100
BOX LENGTH 58.0 mm
-
25
-
-
155
30
-
140
170
35
-
-
200
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function
of the free air ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information
Film Capacitors” with the typical tgd of the curves.
The component temperature rise (T) can be measured (see section “Measuring the Component Temperature” for more details)
or calculated by T = P/G:
• T = Component temperature rise (°C) with maximum of 10 °C rise (°C)
• P = Power dissipation of the component (mW)
• G = Heat conductivity of the component (mW/°C)
Revision: 11-Jun-15
Document Number: 28170
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by T = TC - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC)
2. The peak-to-peak voltage (Upp) shall not be greater than the maximum (Upp) to avoid the ionization inception level
3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2
dU
dU
2    -------- x dt  U RDC x  --------
 dt 
 dt  rated
0
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits (see figure Max. Allowed Component
Temperature Rise)
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the
values mentioned in the table “Heat conductivity”
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes
and surge voltages from the mains included)
VOLTAGE CONDITIONS FOR 6 ABOVE
Tamb  85 °C
85 °C  Tamb  105 °C
URAC
0.7 x URAC
Maximum temporary RMS overvoltage (< 24 h)
1.25 x URAC
0.875 x URAC
Maximum peak voltage (Vo-p) (< 2 s)
1.6 x URDC
1.1 x URDC
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Revision: 11-Jun-15
Document Number: 28170
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-17”.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1
4.1
Dimensions (details)
As specified in chapters “General Data” of
this specification
4.3.1 Initial measurements
Capacitance
Tangent of loss angle:
For C > 1 μF at 1 kHz
For C  1 μF at 10 kHz
4.3
Robustness of terminations
Tensile: Load 30 N; 10 s
4.4
Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 265 °C
Duration: 10 s
4.4.2 Final measurements
No visible damage
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  2 % of the value measured initially
Tangent of loss angle
Increase of tan :  0.002
Compared to values measured initially
Insulation resistance
 50 % values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1
4.6.1 Initial measurements
Capacitance
Tangent of loss angle:
For C > 1 μF at 1 kHz
For C 1 μF at 10 kHz
4.6
Rapid change of temperature
A = - 55 °C
B = + 105 °C
5 cycles
Duration t = 30 min
Visual examination




No visible damage
4.7
Vibration
Mounting: See section “Mounting” of this
specification
Procedure B4:
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s2
(whichever is less severe)
Total duration 6 h






4.7.2 Final inspection
Visual examination
No visible damage
4.9
Mounting: See section “Mounting” for more
information
Pulse shape: Half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
Visual examination





No visible damage
Shock
Revision: 11-Jun-15
Document Number: 28170
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1
4.9.3
4.15
Final measurements
Solvent resistance of the marking
Capacitance
|C/C|  2 % of the value measured initially
Tangent of loss angle
Increase of tan  0.002
Compared to values measured initially
Insulation resistance
50 % values specified in section “Insulation
Resistance” of this specification
Isopropyl alcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B
4.10
Climatic sequence
4.10.2
Dry heat
4.10.3
Damp heat cyclic
Test Db, first cycle
4.10.4
Cold
4.10.6
Damp heat cyclic
Test Db
remaining cycles
4.10.6.2 Final measurements
Temperature: + 105 °C
Duration: 16 h
Temperature: - 55 °C
Duration: 2 h
Voltage proof = URDC for 1 min within 
15 min after removal from test chamber
No breakdown or flash-over
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  3 % of the value measured initially
Tangent of loss angle
Increase of tan  0.002
Compared to values measured in 4.3.1 or
4.6.1 as applicable
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
4.11.1
Initial measurements
Capacitance
Tangent of loss angle at 1 kHz
4.11.3
Final measurements
Visual examination
Voltage proof = URDC for 1 min within 
15 min after removal from test chamber
No visible damage
Legible marking
No breakdown or flash-over
Capacitance
|C/C|  3 % of the value measured in 4.11.1.
Tangent of loss angle
Increase of tan  0.002
Compared to values measured in 4.11.1
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 11-Jun-15
Document Number: 28170
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP386M Snubber
www.vishay.com
Vishay Roederstein
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C3A
4.12.1 Endurance test
at 50 Hz alternative voltage
CONDITIONS
PERFORMANCE REQUIREMENTS
Duration: 2000 h
1.25 x URAC at 85 °C
0.875 x URAC at 105 °C
4.12.1.1 Initial measurements
Capacitance
Tangent of loss angle at:
For C > 1 μF at 1 kHz
For C  1 μF at 10 kHz
4.12.1.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % compared to values measured
in 4.12.1.1
Tangent of loss angle
Increase of tan :
 0.0015 for C  1 μF
 0.0015 for C > 1 μF
Compared to values measured in 4.12.1.1
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Capacitance
Capacitance at - 55 °C
Capacitance at 20 °C
Capacitance at + 105 °C
For - 55 °C to 20 °C 
0 %  |C/C|  2.75 % or 
For 20 °C to 105 °C
- 5.5 %  |C/C|  0 %
As specified in section “Capacitance” of this
specification
SUB-GROUP C4
4.2.6
Temperature characteristics
Initial measurements
Intermediate measurements
4.13
Charge and discharge
10 000 cycles
(1...50 c/s) 2.5 x (dU/dt)R charge to URDC
with maximum pulse slope  0.01 (dU/dt)R
Duration: 5 ms

Discharge resistance:
Un  V DC 
R = ---------------------------------------- 
2.5 x C (dU/dt)

4.13.1
Initial measurements
Capacitance
Tangent of loss angle at:
For C > 1 μF at 1 kHz
For C  1 μF at 10 kHz
4.13.3
Final measurements
Capacitance
|C/C|  5 % compared to values measured
in 4.13.1.
Tangent of loss angle
Increase of tan :
 0.0015 for C  1 μF
 0.0015 for C > 1 μF
Compared to values measured in 4.13.1
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Revision: 11-Jun-15
Document Number: 28170
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Similar pages