Cherry E20-00H 5 current rating Datasheet

GENERAL PURPOSE — SINGLE & DOUBLE POLE
E Series
Features

5 current ratings

Choice of actuator styles

3 terminal types (optional screw
terminals available — consult factory)

3 contact arrangements

Long-life coil spring mechanism

High-temperature 150°C and 200°C
available on select models (consult factory)
Electrical Ratings
Switch
Series
EN61058 Rating
E13/E19
N/A
E19A
(mixed ratings)
E14/E25
N/A
E20
N/A
E28/E29
N/A
E30
N/A
G13/G20
N/A
N/A
Electrical Life at Rated Load
According to VDE
According to UL
(Min. Operations)
(Min. Operations)
UL1054 Rating
15A, 125/250VAC; 3/4HP, 125VAC
1-1/2HP, 250VAC; 2A, 48 VDC (E13 Only)**
15A, 125/250VAC; 3/4HP, 125VAC; 1-1/2HP, 250VAC
0.1A, 125VAC
25A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC; 2A, 48VDC (E14 Only)**
20A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC
30.1A, 125/250/277VAC
(UL Approved Only — Resistive Load Only)
30.1A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC (UL Only)
0.1A, 125VAC
0.1A, 30VDC (G13 Only)
N/A
6,000*
N/A
6,000
N/A
6,000
N/A
6,000
N/A
6,000
N/A
6,000
N/A
6,000*
*Indicates 100K life available.
**100K Hi-temp not available
Specifications
Electrical
Temperature Rating:
Flammability Rating:
105°C Std. (150°C and 200°C optional — E13, E14, E19, E20, G13)
85°C Std. (E28 and E29), 85°C Std. (150°C optional) E25
UL94HB
Materials
Case:
Actuating Button:
Common Terminals:
NO and NC Terminals:
Moving Blade:
Spring:
Auxiliary Actuators:
Roller:
Contacts:
General Purpose Phenolic
Thermoplastic Nylon
Brass (E13, E19, E19A, G13, G20), Silver-Plated Brass (E14, E20),
Silver-Plated Copper (E28, E29, E30)
Brass (E13, E19, E19A, G13, G20)
Copper (E14, E20, E28, E29, E30)
Brass (E13, E19, E19A, G13, G20)
Silver-Plated Beryllium Copper (E14, E20, E28, E29, E30)
Stainless Steel
Cold-Rolled Steel (Nickel-Plated)
Sintered Stainless Steel
Gold Crosspoint (G13, G20, E19A)
Silver-Cadmium Oxide (E13, E14, E19, E19A, E20, E28, E29, E30)
Silver Alloy (E19A, E29, E30)
Dimensions — Single Pole inches (mm)
Actuators — Single Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
“J” & “M” Type
Optional Hardware — Single Pole
Actuator Specifications — Single Pole
–00E
425
0.050
(1.27)
0.285±0.020
(7.24±0.51)
0.100
(2.54)
0.015
(0.38)
—
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
850
0.100
(2.54)
0.248±0.026
(6.30±0.66)
0.050
(1.27)
0.015
(0.38)
—
Brass Knurled Nut
(Nickel-Plated)
0012-0026
E14/E29/E30 –00A
E13/G13
425
0.050
(1.27)
0.670±0.030
(17.02±0.76)
0.108
(2.74)
0.015
(0.38)
—
Star Washer (Lockwasher)
0012-0073
850
0.100
(2.54)
0.633±0.030
(16.08±0.76)
0.050
(1.27)
0.015
(0.38)
—
425
0.050
(1.27)
0.812±0.030
(20.63±0.76)
0.218
(5.54)
0.015
(0.38)
—
850
0.100
(2.54)
0.775±0.030
(19.69±0.76)
0.168
(4.27)
0.015
(0.38)
—
100
0.250
(6.35)
0.312±0.062
(7.93±1.57)
0.187
(4.75)
0.093
(2.36)
1.500
(38.10)
285
0.312
(7.93)
0.468±0.062
(11.89±1.57)
0.105 ***
(2.67)
0.050
(1.27)
0.821
(20.85)
65
0.343
(8.71)
0.281±0.062
(7.14±1.57)
0.187
(4.75)
0.140
(3.56)
1.750
(44.45)
170
0.525
(13.34)
0.437±0.062
(11.10±1.57)
0.218
(5.54)
0.080
(2.03)
1.071
(27.20)
100
0.250
(6.35)
0.718±0.062
(18.24±1.57)
0.187
(4.75)
0.093
(2.36)
1.391
(35.33)
285
0.348
(8.84)
0.860±0.062
(21.84±1.57)
0.130
(3.30)
0.045
(1.14)
0.688
(17.47)
63
0.403
(10.24)
0.687±0.062
(17.45±1.57)
0.187
(4.75)
0.093
(2.36)
1.625
(41.28)
211
0.483
(12.27)
0.828±0.062
(21.03±1.57)
0.218
(5.54)
0.073
(1.85)
0.943
(23.95)
Series/
Prefix
Actuator
Type
E13/G13
Switch
Type
Maximum Maximum
Operating Pre-Travel
Force
inches
(g)
(mm)
–00J
E14/E29/E30
E13/G13
–00M
E14/E29/E30
E13/G13
–00H
E14/E29/E30†
E13/G13
–50H
E14/E29/E30†
E13/G13
–00K
E14/E29/E30†
E13/G13
–50K
E14/E29/E30†
Operating
Point*
inches
(mm)
Minimum Max. Movement Actuation
Over-Travel
Differential
Length**
inches
inches
inches
(mm)
(mm)
(mm)
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).
† E14, E29 and E30 actuators are shorter and formed up 11° at the button.
*** E30 minimum over- travel is 0.150 (3.81).  G13 and E30 have operating point tolerances of ± 0.30.
Ordering Information
Mounting — Single Pole
Select the current rating you need.
Combine the corresponding Series/Prefix
number with the appropriate suffix number
for the switch you need.
Recommended mounting screw: #6-32
round head. Recommended torque on screw:
6 inch lbs. max. Recommended maximum
torque for ferrule: 20 inch pounds
Specifications subject to change without notice.
0012-0023
0012-0025
0012-0028
Circuitry — Single Pole
Contact arrangement available in choice of
single pole double throw or single pole single throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E13-00E is double throw,
E13-01E is normally open, and E13-02E
is normally closed.
Terminals — Single Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down. Forms include straight
30°, 45°, 85° up or down. Other forms can
be provided.
49
Dimensions — Double Pole
Actuators — Double Pole
inches (mm)
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
“J” & “M” Type
Optional Hardware — Double Pole
Actuator Specifications — Double Pole
Series/
Prefix
E19/G20
Actuator
Type
Switch
Type
Maximum Maximum
Operating Pretravel
Force
inches
(g)
(mm)
–00A
E20/E28
E19/G20
1280
–-00J
E20/E28†
E19/G20
–00M
–00H
–50H
130
285
–00K
E20/E28†
E19/G20
205
425
E20/E28†
E19/G20
850
1280
E20/E28†
E19/G20
850
1280
E20/E28†
E19/G20
850
212
425
–50K
E20/E28†
150
312
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.275
(6.99)
0.330
(8.38)
0.400
(10.16)
0.600
(15.24)
0.250
(6.35)
0.348
(8.84)
0.312
(7.92)
0.525
(13.34)
Operating
Point*
inches
(mm)
0.285±0.030
(7.24±0.76)
0.248±0.030
(6.30±0.76)
0.670±0.030
(17.02±0.76)
0.630±0.030
(16.00±0.76)
0.812±0.030
(20.62±0.76)
0.774±0.030
(19.66±0.76)
0.312±0.062
(7.92±1.57)
0.468±0.062
(11.89±1.57)
0.281±0.062
(7.14±1.57)
0.437±0.062
(11.10±1.57)
0.718±0.062
(18.24±1.57)
0.860±0.062
(21.84±1.57)
0.687±0.062
(17.45±1.57)
0.828±0.062
(21.03±1.57)
Each Pole
Minimum Max. Movement Actuation
Overtravel
Differential
Length
inches
inches
inches
(mm)
(mm)
(mm)
0.080
(2.03)
0.050
(1.27)
0.080
(2.03)
0.050
(1.27)
0.218
(5.54)
0.188
(4.78)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.146
(3.71)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(.038)
0.015
(0.38)
0.093
(2.36)
0.050
(1.27)
0.140
(3.56)
0.080
(2.03)
0.093
(2.36)
0.045
(1.14)
0.140
(3.56)
0.075
(1.91)
—
—
Brass Knurled Nut
(Nickel-Plated)
0012-0026
Star Washer (Lock Washer)
0012-0073
—
—
—
1.500
(38.10)
0.821
(20.85)
1.750
(44.45)
1.071
(27.20)
1.391
(35.33)
0.688
(17.48)
1.625
(41.28)
0.943
(23.95)
Contact factory for E25 specifications.
Ordering Information
Mounting — Double Pole
Select the current rating you need. Combine
the corresponding Series/Prefix number
with the appropriate suffix number for the
switch you need. Note: Consult factory for
part number when ordering E19A switches.
Recommended mounting screw: #6-32
round head. Recommended torque on
screw: 6 inch lbs. max. Recommended
maximum torque for ferrule: 20 inch pounds.
Specifications subject to change without notice.
0012-0023
0012-0025
0012-0028
—
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).
† E20 and E28 actuators are shorter and formed up 15° at the button.
50
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
Circuitry — Double Pole
Contact arrangement available in choice of
single pole double throw or single pole single throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E19-00A is double throw,
E19-01A is normally open, and E19-02A
is normally closed.
Terminals — Double Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down on common as well as
open or closed terminal. Forms include
straight 30°, 45°, 85° up or down. Other
forms can be provided.
Similar pages