Surface Mount Coaxial-Ceramic Resonator Filters and Multiplexers 50Ω DC to 6 GHz The Big Deal • • • • • • Low insertion loss with excellent power handling Passbands up to 6 GHz Fractional bandwidth from 3 to 25% Low profile designs with min. height of 0.120” Excellent temperature stability Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Custom integrated assembly with LNA in greatly simplifying system integration. They can be realized in small form factors with high-quality, precise machining for applications where size is critical. Excellent repeatability across units is achieved through precise tuning and process control. Key Features Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter CBP-1023A+ 50Ω 1005 to 1041 MHz CASE STYLE: KV1514 Features • Fast roll-off • Low passband IL • Miniature shielded package Electrical Specifications at 25°C Parameter Pass Band Applications Stop Band, Lower • Aviation / Aeronautical • Test and measurement Stop Band, Upper Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit - 1005-1041 1005-1041 DC-970 DC-970 1075-2400 1075-2400 20.0 1023 2.5 1.7 30.0 20.0 30.0 20.0 3.0 2.3 MHz dB :1 dB :1 dB :1 F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 20.0 - - Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 10 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) DC Insertion Loss (dB) VSWR (:1) Frequency (MHz) 1 99.03 358.09 1005 25.96 100 100.44 444.75 1008 24.17 500 90.34 262.28 1010 23.35 900 73.10 85.22 1012 22.77 970 38.08 30.70 1014 22.36 976 30.83 23.24 1016 22.06 983 20.64 13.65 1018 21.79 989 10.38 5.32 1020 21.54 992 5.91 2.58 1022 21.34 1005 2.10 1.26 1023 21.26 1023 1.80 1.33 1026 21.26 1041 2.22 1.23 1028 21.49 1053 11.27 8.86 1030 21.88 1060 20.34 23.80 1032 22.41 1070 30.38 46.02 1034 23.02 1075 34.46 56.23 1036 23.75 1100 49.82 88.92 1037 24.19 1500 68.33 90.36 1038 24.74 2000 62.69 87.22 1040 26.29 2400 58.96 78.38 1041 27.34 CBP-1023A+ INSERTION LOSS (Full band) CBP-1023A+ INSERTION LOSS (Pass band) 0 INSERTION LOSS (dB) The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications INSERTION LOSS (dB) 0 +RoHS Compliant Group Delay (nsec) 20 40 60 80 100 0 480 960 1440 FREQUENCY (MHz) 1920 5 10 2.00 20 2.50 1005 25 30 2400 1.50 15 970 990 1041 1010 1030 FREQUENCY (MHz) 1050 1070 CBP-1023A+ GROUP DELAY CBP-1023A+ VSWR 28 GROUP DELAY (ns) 1000 VSWR 100 1.40 10 1.20 1.00 1005 1 1023 0 480 960 1440 FREQUENCY (MHz) 1023 1041 1920 2400 27 26 25 24 23 22 21 1005 1009.5 1014 1018.5 1023 1027.5 1032 1036.5 1041 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV.OR M163066 CBP-1023A+ EDU2162/1 URJ 171025 Page 2 of 3 CBP-1023A+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND 10 15 16 2,3,4,5,6,7,8,9,11,12,13,14,15,16 13 14 12 11 1 10 2 9 METALLIZATION A 3 Demo Board MCL P/N: TB-578+ Suggested PCB Layout (PL-331) 4 5 6 7 SOLDER RESIST 8 C B PCB Land Pattern K D E 3 4 5 6 7 M H 8 F D L 9 2 J N N Q F 1 T V 10 16 15 14 13 12 G 11 R U P S Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .550 13.97 B 1.040 26.24 C .225 5.72 D .160 4.06 E .120 3.05 F .077 1.96 G .070 1.78 H .160 4.06 J .590 14.99 M .140 3.56 N .230 5.84 P .180 4.57 Q .195 4.95 R .115 2.92 S .780 19.81 T .290 7.37 U .110 2.79 V .100 2.54 K 1.080 27.43 L .100 2.54 Wt. grams 4.8 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3