AIC AIC2302-33GV5 700ma synchronous pwm step-down Datasheet

AIC2302
700mA Synchronous PWM Step-Down
DC/DC Converter
 FEATURES








 DESCRIPTION
2.5V to 5.5V Input Voltage Range
700mA Guaranteed Output Current
Up to 95% Efficiency
Low RDS(ON) Internal Switche: 280mΩ
No Schottky Diode Required
100% Duty Cycle in Low Dropout Operation
Operating Frequency: 1.5MHz
Accurate Reference 0.6V Provides Low
Output Voltages
 APPLICATIONS







LCD TV
Multi-function Peripheral
Cellular Phones
CPU I/O Supplies
Cordless Phones
PDAs and Handy-Terminals
Battery-Operated Devices (1 Li-Ion or 3
NiMH/ NiCd)
The AIC2302 is a low-noise, pulse-widthmodulated (PWM), DC-DC step-down converter.
The device is available in an adjustable version
and fixed output voltages of 1.0V, 1.2V, 1.8V,
and 3.3V. The device features an internal
synchronous rectifier for high efficiency; it
requires no external Schottky diode. Shutdown
mode places the device in standby, reducing
supply current to under 1µA. Other features of
the
AIC2302
include high efficiency, low
dropout voltage, short circuit protection, over
temperature protection, and over voltage
protection. It is available in a small 5 pins SOT23 package.
 APPLICATIONS CIRCUIT
Fig. 1 Fixed Step-Down DC/DC Converter
Analog Integrations Corporation
Si-Soft Research Center
DS-2302G-01 20120531
3A1, No.1, Li-Hsin Rd. I , Science Park , Hsinchu 300, Taiwan , R.O.C.
TEL: 886-3-5772500
FAX: 886-3-5772510
www.analog.com.tw
1
AIC2302
Fig. 2 Adjustable Step-Down DC/DC Converter
 ORDERING INFORMATION
AI C2302 -XX X XX XX
P IN CO NFIG UR ATIO N
P ACK ING TY PE
TR: T APE & REE L
B G: BA G
TOP VIEW
SOT-23-5
V OU T
V IN
5
4
P ACK AG E TYP E
V 5: S O T-2 3-5
1
G : G reen Pa ckag e
2
3
EN GN D LX
Fixed version
O UTP UT VO LTA G E
DE FA ULT: Adj.
-10: 1.0V
-12 : 1.2 V
-18 : 1.8 V
-33 : 3.3 V
T OP V IEW
SOT -2 3-5
FB
VIN
5
4
1
Exam ple:
AIC2 302-3 3G V5TR

3.3 V O utp ut V ers ion ,
2
3
EN G ND L X
A djusta ble ve rsion
in S OT-23 -5 G re en P ac kage
& Tape & Re el Packin g Type
AIC2 302G V 5TR

Ad justa ble Ve rs io n,
in S OT-23 -5 G re en P ac kage
& Tape & Re el Packin g Type
2
AIC2302
 ORDERING INFORMATION (Continuous)


Marking (Fixed Version)
Part No.
Marking
AIC2302-10GV5
HR10G
AIC2302-12GV5
HR12G
AIC2302-18GV5
HR18G
AIC2302-33GV5
HR33G
Marking (Adjustable Version)
Part No.
Marking
AIC2302GV5
2302G
3
AIC2302
 ABSOLUTE MAXIMUM RATINS
VIN, LX Voltage
6V
-0.3 V to VIN
EN, FB Pin Voltage
-40C to 85C
Operating Ambient Temperature Range TA
Operating Maximum Junction Temperature TJ
150C
-65C to 150C
Storage Temperature Range TSTG
260C
Lead Temperature (Soldering 10 Sec.)
Thermal Resistance Junction to Case
SOT-23-5
115C/W
Thermal Resistance Junction to Ambient
SOT-23-5
250C/W
(Assume no Ambient Airflow, no Heatsink)
Absolute Maximum Ratings are those values beyond which the life of a device may be impaired.
4
AIC2302

ELECTRICAL CHARACTERISTICS
(TA=25C, VIN=3.6V unless otherwise specified.) (Note 1)
PARAMETER
CONDITIONS
SYMBOL
MIN
VIN
Output Adjustment Range
Reference Voltage
Input Voltage Range
TYP
MAX
UNITS
2.5
5.5
V
VOUT
0.6V
VIN-0.3V
V
VREF
0.588
0.612
V
IFB
-50
50
nA
0.6
FB Input Current
VFB = VIN
P-Channel On-Resistance
IOUT = 0.2A
PRDS(ON)
280
390
m
N-Channel On-Resistance
IOUT = 0.2A
NRDS(ON)
250
390
m
LX Leakage Current
VLX=0V or VLX=3.6V
1
uA
Peak Inductor Current
VIN = 5V
IPK
Quiescent Current
IOUT = 0mA,
VFB=0.78V
IQ
65
85
A
Shutdown Supply Current
EN = GND
ISHDN
0.1
1
A
EN High-Level Input Voltage
VIN=2.5V to 5.5V
VEN_H
EN Low-Level Input Voltage
VIN=2.5V to 5.5V
VEN_L
-1
0.9
1.1
A
1.5
Oscillator Frequency
fOSC
1.2
Maximum Duty Cycle
DMAX
100
V
1.5
0.4
V
1.8
MHz
%
Thermal Shutdown Temperature
150
°C
Thermal Shutdown Hysteresis
25
°C
Note 1: Specifications are production tested at TA=25C. Specifications over the -40C to 85C operating temperature range are assured by design, characterization and correlation with Statistical Quality Controls (SQC).
5
AIC2302
 TYPICAL PERFORMANCE CHARACTERISTICS
VIN=5V
VIN=5V
VIN=3.3V
VIN=2.5V
Fig. 3 Efficiency vs. Input Voltage
Fig. 4 Efficiency vs. Input Voltage t
Fig. 5 Oscillator Frequency vs. Temperature
Fig. 6 Oscillator Frequency vs. Input Voltage
Fig. 7 RDS(ON) vs. Input Voltage
Fig. 8 Supply Current vs. Input Voltage
6
AIC2302
Fig. 9 Current Limit vs. Input Voltage
Fig. 10 Output Voltage vs. Temperaturet
Fig. 11 Load Transient Response
Fig. 12 Load Transient Response
Fig. 13 Load Transient Response
Fig. 14 Load Transient Response
7
AIC2302

BLOCK DIAGRAM
Functional Block Diagram of AIC2302

PIN DESCRIPTIONS
Pin Name
Pin Function
NC
No Internal Connect (Floating or Connecting to GND).
EN
Chip Enable (Active High).
VIN
Power Input.
LX
Pin for Switching.
GND
Ground.
FB/VOUT Feedback/Output Voltage Pin.
8
AIC2302

APPLICATION INFORMATION
Operation
frequency of AIC2302 will be reduced to one third of
The AIC2302 is a low-noise step-down DC/DC
the normal switching frequency. This lower switching
converter with current-mode PWM control architecture.
frequency ensures the inductor current has more time
It features an internal synchronous rectifier, which
to discharge, thereby preventing inductor current
eliminates the external Schottky diode and increases
runaway. The switching frequency will automatically
efficiency. During normal operation, the AIC2302 can
return to its designed value while short circuit condition
regulate its output voltage through a feedback control
is released.
circuit, which is composed of an error amplifier; a
Shutdown
current
comparator
and
several
control
signal
generators. By comparing the feedback voltage to the
reference voltage of 0.6V, the error amplifier varies its
output voltage. The output voltage of the error amplifier
By connecting the EN pin to GND, the AIC2302 can be
shut down to reduce the supply current to 0.1A
(typical). At this operation mode, the output voltage of
step-down converter is equal to 0V.
is compared with the summing signal of current
sensing signal and slope compensation signal to
100% Duty Cycle Operation
determine the duty cycle of internal main power switch
When the input voltage approaches the output voltage,
(P-channel MOSFET). While the main power switch is
the AIC2302 smoothly transits to 100% duty cycle
turned on, the synchronous power switch (N-channel
operation. This allows AIC2302 to regulate the output
MOSFET) will be turned off through anti-short-through
voltage until AIC2302 completely enters 100% duty
block. Similarly, when the main power switch is turned
cycle operation. In 100% duty cycle mode, the output
off, the synchronous power switch will be turned on
voltage is equal to the input voltage minus the voltage,
until the inductor current starts to reverse or the
which is the drop across the main power switch.
beginning of the next switching cycle. In order to
The AIC2302 achieves 100% duty cycle operation by
achieve better efficiency and prevent overcharging the
extending the turn-on time of the main power switch. If
output capacitor.
the summing signal of current sensing signal and slope
Current Limitation
The AIC2302 provides current limit function by using
an internal sensing resistor. When the main power
switch turns on, current follows through the internal
sensing resistor. And current amplifier senses the
voltage, which crosses the resistor, and amplifies it.
While the sensed voltage gets higher than reference
voltage, the current limitation function is activated.
While the current limitation function is activated, the
duty cycle will be reduced to limit the output power to
protect the internal power switches.
Short Circuit Protection
While the output is shorted to ground, the switching
compensation signal does not reach the output voltage
level of the error amplifier at the end of 90% switching
period, the main power switch is continuously turned
on and the oscillator remains off until the summing
signal
of
current
sensing
signal
and
slope
compensation signal reaches the output voltage level
of the error amplifier. After the summing signal of
current sensing signal and slope compensation signal
reaches the output voltage level of the error amplifier,
the main power switch is turned off and the
synchronous power switch is turned on for a constant
off time. At the end of the constant off time, the next
switching cycle is begun. While the input voltage
approaches
the
output
voltage,
the
switching
9
AIC2302
frequency decreases gradually to smoothly transit to
ripple can be expressed as:
100% duty cycle operation.
VOUT 
If input voltage is very close to output voltage, the
IL
 ESR  IL
8  fOSC  COUT
switching mode goes from pure PWM mode to 100%
For lower output voltage ripple, the use of low ESR
duty cycle operation. During this transient state
ceramic capacitor is recommended. The tantalum
mentioned above, large output ripple voltage may
capacitor can also be used well, but its ERS is larger
appear on output terminal.
than that of ceramic capacitor.
When
Components Selection
choosing
the
input
and
output
ceramic
capacitors, X5R and X7R types are recommended
Inductor
The inductor selection depends on the current ripple of
inductor, the input voltage and the output voltage.
VOUT
L
fOSC  IL
because they retain their capacitance over wider
ranges of voltage and temperature than other types.
Output Voltage Programming (AIC2302 Adjustable
Version Only)
By connecting a resistive divider R1 and R2, the output


V
1  OUT 
VIN 

Accepting a large current ripple of inductor allows the
voltage of AIC2302 step-down converter can be set.
use of a smaller inductance. However, higher current
VOUT can be calculated as:
ripple of inductor can cause higher output ripple

R 
VOUT  0.6  1  1 
 R2 
voltage and large core loss. By setting an acceptable
current ripple of inductor, a suitable inductance can be
obtained from above equation.
The resistive divider should sit as close to VFB pin as
possible.
In addition, it is important to ensure the inductor
saturation current exceeds the peak value of inductor
Layout Consideration
current in application to prevent core saturation. The
In order to ensure a proper operation of AIC2302, the
peak value of inductor current can be calculated
following points should be managed comprehensively.
according to the following equation.
1. The input capacitor and VIN should be placed as
IPEAK  IOUT max  
close as possible to each other to reduce the input

VOUT 
V
1  OUT 
2  fOSC  L 
VIN 
voltage ripple and noise.
2. The output loop, which is consisted of the inductor,
Input Capacitor and Output Capacitor
To prevent the high input voltage ripple and noise
resulted from high frequency switching, the use of low
ESR ceramic capacitor for the maximum RMS current
is recommended. The approximated RMS current of
the input capacitor can be calculated according to the
following equation.
2
ICINRMS  IOUT
(MAX ) 
the internal main power switch, the internal synchronous power switch and the output capacitor,
should be kept as small as possible.
3. The routes with large current should be kept short
and wide.
4. Logically the large current on the converter should
flow at the same direction.
VOUT VIN  VOUT 
2
VIN

IL2
5. The VFB pin should be connected to the feedback
12
resistors directly and the route should be away
The selection of output capacitor depends on the
from the noise sources.
required output voltage ripple. The output voltage
10
AIC2302
PHYSICAL DIMENSIONS
D
E1
 SOT-23-5
A
A
E

e
e1
SEE VIEW B
WITH PLATING
c
A
A2
b
SECTION A-A
A1
BASE METAL
0.25
S
Y
M
B
O
L
GAUGE PLANE
SEATING PLANE
L1
θ
L
VIEW B
Note : 1. Refer to JEDEC MO-178AA.
2. Dimension "D" does not include mold flash, protrusions
or gate burrs. Mold flash, protrusion or gate burrs shall not
exceed 10 mil per side.
3. Dimension "E1" does not include inter-lead flash or protrusions.
4. Controlling dimension is millimeter, converted inch
dimensions are not necessarily exact.
A
SOT-23-5
MILLIMETERS
MIN.
MAX.
0.95
1.45
A1
0.00
0.15
A2
0.90
1.30
b
0.30
0.50
c
0.08
0.22
D
2.80
3.00
E
2.60
3.00
E1
1.50
1.70
e
0.95 BSC
e1
1.90 BSC
L
θ
0.60
0.30
L1
0.60 REF
0°
8°
Note:
Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry other than
circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result from its use. We
reserve the right to change the circuitry and specifications without notice.
Life Support Policy: AIC does not authorize any AIC product for use in life support devices and/or systems. Life support devices or systems are
devices or systems which, (I) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to perform, when
properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
11
Similar pages