CREE MKRAWT-00-0000-0B0UF430H Available in ansi white bins as well as 4-step and 2-step easywhite bins at 2700 k Datasheet

Cree® XLamp® MK-R LEDs
Product Description
FEATURES
Built on Cree’s revolutionary SC³ Technology® platform, the
•
Available in ANSI white bins as well as 4-step and 2-step
XLamp MK‑R LED brings new levels of price and performance
EasyWhite bins at 2700 K, 3000 K, 3500 K, 4000 K, 4500 K
to directional LED arrays, enabling lighting manufacturers to
and 5000 K CCT
®
create the next generation of high-lumen indoor and outdoor
•
Two voltage options: 6 V & 12 V
LED lighting systems. In single-LED systems, the XLamp MK‑R
•
Low thermal resistance: 1.7 °C/W
LED, with EasyWhite color binning, provides the LED industry’s
•
Maximum junction temperature: 150 °C
tightest unit-to-unit color consistency. For systems using multiple
•
Binned at 85 °C
LEDs, the MK-R enables manufacturers to use fewer LEDs while
•
Viewing angle: 120°
maintaining light output and color consistency, which translates
•
Available in cool white, 70-, 80- and 90‑CRI minimums
to lower system cost.
•
Unlimited floor life at ≤ 30 ºC/85% RH
•
Reflow solderable - JEDEC J‑STD‑020C
The XLamp MK‑R LED is optimized for directional lighting
•
Electrically neutral thermal path
applications and is a welcome addition to applications requiring
•
RoHS and REACh compliant
high lumen output, a compact optical source and a broad palette
•
UL® recognized component (E349212)
®
CLD-DS60 Rev 8A
Product family data sheet
www.cree.com/Xlamp
of color temperature and CRI values.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite®
and SC3 Technology® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
XLamp ® MK-R LEDs
Table of Contents
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V............................................................................................................................. 4
Flux Characteristics, ANSI White Order Codes and Bins - 6 V............................................................................................................................. 6
Flux Characteristics, EasyWhite® Order Codes and Bins -12 V............................................................................................................................ 9
Flux Characteristics, ANSI White Order Codes and Bins - 12 V......................................................................................................................... 11
Relative Spectral Power Distribution................................................................................................................................................................... 14
Relative Flux vs. Junction Temperature............................................................................................................................................................... 14
Electrical Characteristics...................................................................................................................................................................................... 15
Relative Flux vs. Current....................................................................................................................................................................................... 16
Relative Chromaticity vs. Current......................................................................................................................................................................... 17
Relative Chromaticity vs. Temperature................................................................................................................................................................ 18
Typical Spatial Distribution................................................................................................................................................................................... 18
Thermal Design..................................................................................................................................................................................................... 19
Performance Groups - Luminous Flux................................................................................................................................................................. 20
Performance Groups - Chromaticity.................................................................................................................................................................... 21
Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space............................................................................................................................. 24
Cree ANSI White Bins Plotted on the 1931 CIE Color Space............................................................................................................................. 25
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 26
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 26
Bin and Order Code Formats................................................................................................................................................................................ 27
Reflow Soldering Characteristics......................................................................................................................................................................... 28
Notes..................................................................................................................................................................................................................... 29
Mechanical Dimensions....................................................................................................................................................................................... 31
Tape and Reel........................................................................................................................................................................................................ 32
Packaging.............................................................................................................................................................................................................. 33
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp ® MK-R LEDs
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
1.7
degrees
120
Temperature coefficient of voltage (6 V, 1400 mA, 85 °C)
mV/°C
-4
Temperature coefficient of voltage (12 V, 700 mA, 85 °C)
mV/°C
-8
Viewing angle - full width half maximum (FWHM)
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
DC forward current (6 V, 1400 mA, 85 °C)
mA
2500
DC forward current (12 V, 700 mA, 85 °C)
mA
1250
Reverse voltage
V
5
Forward voltage (6 V, 1400 mA, 85 °C)
V
5.85
7
Forward voltage (12 V, 700 mA, 85 °C)
V
11.7
14
LED junction temperature
°C
150
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp ® MK-R LEDs
Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C)
The following tables provide order codes for XLamp MK‑R LEDs. For a complete description of the order code nomenclature, please
reference Bin and Order Code Formats (page 27).
Minimum Luminous Flux**
Color
CCT
Range
5000 K
4500 K
4000 K
80-CRI
EasyWhite
3500 K
3000 K
2700 K
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
H4
970
1091
H2
900
1012
G4
840
945
MKRAWT-00-0000-0B0HG450H
MKRAWT-00-0000-0B0HG450F
H4
970
1091
MKRAWT-00-0000-0B0HH445H
MKRAWT-00-0000-0B0HH445F
H2
900
1012
G4
840
945
MKRAWT-00-0000-0B0HG445H
MKRAWT-00-0000-0B0HG445F
H4
970
1091
MKRAWT-00-0000-0B0HH440H
MKRAWT-00-0000-0B0HH440F
H2
900
1012
G4
840
945
MKRAWT-00-0000-0B0HG440H
MKRAWT-00-0000-0B0HG440F
H4
970
1091
MKRAWT-00-0000-0B0HH435H
MKRAWT-00-0000-0B0HH435F
H2
900
1012
G4
840
945
G2
780
877
H2
900
1012
G4
840
945
G2
780
877
MKRAWT-00-0000-0B0HG230H
MKRAWT-00-0000-0B0HG230F
H2
900
1012
MKRAWT-00-0000-0B0HH227H
MKRAWT-00-0000-0B0HH227F
G4
840
945
G2
780
877
F4
730
821
Chromaticity
Region
Order Code
Chromaticity
Region
MKRAWT-00-0000-0B0HH450H
50H
45H
40H
35H
MKRAWT-00-0000-0B0HH250H
MKRAWT-00-0000-0B0HH245H
MKRAWT-00-0000-0B0HH240H
MKRAWT-00-0000-0B0HH235H
MKRAWT-00-0000-0B0HG435H
MKRAWT-00-0000-0B0HH450F
50F
45F
40F
35F
MKRAWT-00-0000-0B0HG235H
27H
MKRAWT-00-0000-0B0HG430H
MKRAWT-00-0000-0B0HG427H
MKRAWT-00-0000-0B0HG227H
MKRAWT-00-0000-0B0HF427H
MKRAWT-00-0000-0B0HH250F
MKRAWT-00-0000-0B0HH245F
MKRAWT-00-0000-0B0HH240F
MKRAWT-00-0000-0B0HH235F
MKRAWT-00-0000-0B0HG435F
MKRAWT-00-0000-0B0HG235F
MKRAWT-00-0000-0B0HH230H
30H
Order Code
MKRAWT-00-0000-0B0HH230F
30F
27F
MKRAWT-00-0000-0B0HG430F
MKRAWT-00-0000-0B0HG427F
MKRAWT-00-0000-0B0HG227F
MKRAWT-00-0000-0B0HF427F
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• Minimum CRI for 80-CRI White is 80.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp ® MK-R LEDs
Flux Characteristics, EasyWhite® Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) - Continued
Minimum Luminous Flux**
Color
CCT
Range
3000 K
90-CRI
EasyWhite
2700 K
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
F4
730
821
F2
680
765
E4
635
714
E2
590
664
MKRAWT-00-0000-0B0UE230H
MKRAWT-00-0000-0B0UE230F
F2
680
765
MKRAWT-00-0000-0B0UF227H
MKRAWT-00-0000-0B0UF227F
E4
635
714
E2
590
664
D4
550
619
Chromaticity
Region
Order Code
Chromaticity
Region
MKRAWT-00-0000-0B0UF430H
30H
27H
MKRAWT-00-0000-0B0UF230H
MKRAWT-00-0000-0B0UE430H
MKRAWT-00-0000-0B0UE427H
MKRAWT-00-0000-0B0UE227H
MKRAWT-00-0000-0B0UD427H
Order Code
MKRAWT-00-0000-0B0UF430F
30F
27F
MKRAWT-00-0000-0B0UF230F
MKRAWT-00-0000-0B0UE430F
MKRAWT-00-0000-0B0UE427F
MKRAWT-00-0000-0B0UE227F
MKRAWT-00-0000-0B0UD427F
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C)
Chromaticity
Kit
51
E1
E2
E3
E4
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
65 CRI Typical
70 CRI Minimum
J4
1120
1260
MKRAWT-00-00000B00J4051
MKRAWT-00-00000B0BJ4051
J2
1040
1170
MKRAWT-00-00000B00J2051
MKRAWT-00-00000B0BJ2051
H4
970
1091
MKRAWT-00-00000B00H4051
MKRAWT-00-00000B0BH4051
H2
900
1012
J4
1120
1260
MKRAWT-00-00000B00J40E1
J2
1040
1170
MKRAWT-00-00000B00J20E1
MKRAWT-00-00000B0BJ20E1
H4
970
1091
MKRAWT-00-00000B00H40E1
MKRAWT-00-00000B0BH40E1
H2
900
1012
J4
1120
1260
MKRAWT-00-00000B00J40E2
MKRAWT-00-00000B0BJ40E2
J2
1040
1170
MKRAWT-00-00000B00J20E2
MKRAWT-00-00000B0BJ20E2
H4
970
1091
MKRAWT-00-00000B00H40E2
MKRAWT-00-00000B0BH40E2
H2
900
1012
J2
1040
1170
MKRAWT-00-00000B00J20E3
MKRAWT-00-00000B0BJ20E3
H4
970
1091
MKRAWT-00-00000B00H40E3
MKRAWT-00-00000B0BH40E3
MKRAWT-00-00000B0HH40E3
H2
900
1012
MKRAWT-00-00000B00H20E3
MKRAWT-00-00000B0BH20E3
MKRAWT-00-00000B0HH20E3
G4
840
945
J2
1040
1170
MKRAWT-00-00000B00J20E4
MKRAWT-00-00000B0BJ20E4
H4
970
1091
MKRAWT-00-00000B00H40E4
MKRAWT-00-00000B0BH40E4
MKRAWT-00-00000B0HH40E4
H2
900
1012
MKRAWT-00-00000B00H20E4
MKRAWT-00-00000B0BH20E4
MKRAWT-00-00000B0HH20E4
G4
840
945
6200 K
6500 K
5700 K
5000 K
4500 K
80 CRI Minimum
90 CRI Minimum
MKRAWT-00-00000B0BH2051
MKRAWT-00-00000B0BH20E1
MKRAWT-00-00000B0BH20E2
MKRAWT-00-00000B0HG40E3
MKRAWT-00-00000B0HG40E4
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) - Continued
Chromaticity
Kit
E5
E6
E7
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
65 CRI Typical
70 CRI Minimum
J2
1040
1170
MKRAWT-00-00000B00J20E5
MKRAWT-00-00000B0BJ20E5
H4
970
1091
MKRAWT-00-00000B00H40E5
MKRAWT-00-00000B0BH40E
MKRAWT-00-00000B0HH40E5
H2
900
1012
MKRAWT-00-00000B00H20E5
MKRAWT-00-00000B0BH20E
MKRAWT-00-00000B0HH20E5
G4
840
945
MKRAWT-00-00000B00G40E5
MKRAWT-00-00000B0BG40E5
MKRAWT-00-00000B0HG40E5
H4
970
1091
MKRAWT-00-00000B0BH40E6
MKRAWT-00-00000B0HH40E6
H2
900
1012
MKRAWT-00-00000B0BH20E6
MKRAWT-00-00000B0HH20E6
G4
840
945
MKRAWT-00-00000B0BG40E6
MKRAWT-00-00000B0HG40E6
G2
780
877
H4
970
1091
MKRAWT-00-00000B0BH40E7
H2
900
1012
MKRAWT-00-00000B0BH20E7
MKRAWT-00-00000B0HH20E7
G4
840
945
MKRAWT-00-00000B0BG40E7
MKRAWT-00-00000B0HG40E7
G2
780
877
F4
730
821
MKRAWT-00-00000B0UF40E7
F2
680
765
MKRAWT-00-00000B0UF20E7
E4
635
714
MKRAWT-00-00000B0UE40E7
E2
590
664
MKRAWT-00-00000B0UE20E7
4000 K
3500 K
3000 K
80 CRI Minimum
90 CRI Minimum
MKRAWT-00-00000B0HG20E6
MKRAWT-00-00000B0HG20E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 6 V (If = 1400 mA, TJ = 85 °C) - Continued
Chromaticity
Kit
E8
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
H2
900
1012
MKRAWT-00-00000B0HH20E8
G4
840
945
MKRAWT-00-00000B0HG40E8
G2
780
877
MKRAWT-00-00000B0HG20E8
F4
730
821
MKRAWT-00-00000B0HF40E8
F2
680
765
MKRAWT-00-00000B0UF20E8
E4
635
714
MKRAWT-00-00000B0UE40E8
E2
590
664
MKRAWT-00-00000B0UE20E8
D4
550
619
MKRAWT-00-00000B0UD40E8
2700 K
65 CRI Typical
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp ® MK-R LEDs
Flux Characteristics, EasyWhite® Order Codes and Bins -12 V (If = 700 mA, TJ = 85 °C)
The following tables provide order codes for XLamp MK‑R LEDs. For a complete description of the order code nomenclature, please
reference Bin and Order Code Formats (page 27).
Minimum Luminous Flux**
Color
CCT
Range
5000 K
4500 K
4000 K
80-CRI
EasyWhite
3500 K
3000 K
2700 K
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
H4
970
1091
H2
900
1012
G4
840
945
MKRAWT-00-0000-0D0HG450H
MKRAWT-00-0000-0D0HG450F
H4
970
1091
MKRAWT-00-0000-0D0HH445H
MKRAWT-00-0000-0D0HH445F
H2
900
1012
G4
840
945
MKRAWT-00-0000-0D0HG445H
MKRAWT-00-0000-0D0HG445F
H4
970
1091
MKRAWT-00-0000-0D0HH440H
MKRAWT-00-0000-0D0HH440F
H2
900
1012
G4
840
945
MKRAWT-00-0000-0D0HG440H
MKRAWT-00-0000-0D0HG440F
H4
970
1091
MKRAWT-00-0000-0D0HH435H
MKRAWT-00-0000-0D0HH435F
H2
900
1012
G4
840
945
G2
780
877
H2
900
1012
G4
840
945
G2
780
877
MKRAWT-00-0000-0D0HG230H
MKRAWT-00-0000-0D0HG230F
H2
900
1012
MKRAWT-00-0000-0D0HH227H
MKRAWT-00-0000-0D0HH227F
G4
840
945
G2
780
877
F4
730
821
Chromaticity
Region
Order Code
Chromaticity
Region
MKRAWT-00-0000-0D0HH450H
50H
45H
40H
35H
MKRAWT-00-0000-0D0HH250H
MKRAWT-00-0000-0D0HH245H
MKRAWT-00-0000-0D0HH240H
MKRAWT-00-0000-0D0HH235H
MKRAWT-00-0000-0D0HG435H
MKRAWT-00-0000-0D0HH450F
50F
45F
40F
35F
MKRAWT-00-0000-0D0HG235H
27H
MKRAWT-00-0000-0D0HG430H
MKRAWT-00-0000-0D0HG427H
MKRAWT-00-0000-0D0HG227H
MKRAWT-00-0000-0D0HF427H
MKRAWT-00-0000-0D0HH250F
MKRAWT-00-0000-0D0HH245F
MKRAWT-00-0000-0D0HH240F
MKRAWT-00-0000-0D0HH235F
MKRAWT-00-0000-0D0HG435F
MKRAWT-00-0000-0D0HG235F
MKRAWT-00-0000-0D0HH230H
30H
Order Code
MKRAWT-00-0000-0D0HH230F
30F
27F
MKRAWT-00-0000-0D0HG430F
MKRAWT-00-0000-0D0HG427F
MKRAWT-00-0000-0D0HG227F
MKRAWT-00-0000-0D0HF427F
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• Minimum CRI for 80-CRI White is 80.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp ® MK-R LEDs
Flux Characteristics, EasyWhite® Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C) - Continued
Minimum Luminous Flux**
Color
CCT
Range
3000 K
90-CRI
EasyWhite
2700 K
2-Step
4-Step
Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
F4
730
821
F2
680
765
E4
635
714
E2
590
664
MKRAWT-00-0000-0D0UE230H
MKRAWT-00-0000-0D0UE230F
F2
680
765
MKRAWT-00-0000-0D0UF227H
MKRAWT-00-0000-0D0UF227F
E4
635
714
E2
590
664
D4
550
619
Chromaticity
Region
Order Code
Chromaticity
Region
MKRAWT-00-0000-0D0UF430H
30H
27H
MKRAWT-00-0000-0D0UF230H
MKRAWT-00-0000-0D0UE430H
MKRAWT-00-0000-0D0UE427H
MKRAWT-00-0000-0D0UE227H
MKRAWT-00-0000-0D0UD427H
Order Code
MKRAWT-00-0000-0D0UF430F
30F
27F
MKRAWT-00-0000-0D0UF230F
MKRAWT-00-0000-0D0UE430F
MKRAWT-00-0000-0D0UE427F
MKRAWT-00-0000-0D0UE227F
MKRAWT-00-0000-0D0UD427F
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• Minimum CRI for 90-CRI White is 90.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C)
Chromaticity
Kit
51
E1
E2
E3
E4
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
65 CRI Typical
70 CRI Minimum
J4
1120
1260
MKRAWT-00-00000D00J4051
MKRAWT-00-00000D0BJ4051
J2
1040
1170
MKRAWT-00-00000D00J2051
MKRAWT-00-00000D0BJ2051
H4
970
1091
MKRAWT-00-00000D00H4051
MKRAWT-00-00000D0BH4051
H2
900
1012
J4
1120
1260
MKRAWT-00-00000D00J40E1
J2
1040
1170
MKRAWT-00-00000D00J20E1
MKRAWT-00-00000D0BJ20E1
H4
970
1091
MKRAWT-00-00000D00H40E1
MKRAWT-00-00000D0BH40E1
H2
900
1012
J4
1120
1260
MKRAWT-00-00000D00J40E2
MKRAWT-00-00000D0BJ40E2
J2
1040
1170
MKRAWT-00-00000D00J20E2
MKRAWT-00-00000D0BJ20E2
H4
970
1091
MKRAWT-00-00000D00H40E2
MKRAWT-00-00000D0BH40E2
H2
900
1012
J2
1040
1170
MKRAWT-00-00000D00J20E3
MKRAWT-00-00000D0BJ20E3
H4
970
1091
MKRAWT-00-00000D00H40E3
MKRAWT-00-00000D0BH40E3
MKRAWT-00-00000D0HH40E3
H2
900
1012
MKRAWT-00-00000D00H20E3
MKRAWT-00-00000D0BH20E3
MKRAWT-00-00000D0HH20E3
G4
840
945
J2
1040
1170
MKRAWT-00-00000D00J20E4
MKRAWT-00-00000D0BJ20E4
H4
970
1091
MKRAWT-00-00000D00H40E4
MKRAWT-00-00000D0BH40E4
MKRAWT-00-00000D0HH40E4
H2
900
1012
MKRAWT-00-00000D00H20E4
MKRAWT-00-00000D0BH20E4
MKRAWT-00-00000D0HH20E4
G4
840
945
6200 K
6500 K
5700 K
5000 K
4500 K
80 CRI Minimum
90 CRI Minimum
MKRAWT-00-00000D0BH2051
MKRAWT-00-00000D0BH20E1
MKRAWT-00-00000D0BH20E2
MKRAWT-00-00000D0HG40E3
MKRAWT-00-00000D0HG40E4
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C) - Continued
Chromaticity
Kit
E5
E6
E7
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
65 CRI Typical
70 CRI Minimum
J2
1040
1170
MKRAWT-00-00000D00J20E5
MKRAWT-00-00000D0BJ20E5
H4
970
1091
MKRAWT-00-00000D00H40E5
MKRAWT-00-00000D0BH40E
MKRAWT-00-00000D0HH40E5
H2
900
1012
MKRAWT-00-00000D00H20E5
MKRAWT-00-00000D0BH20E
MKRAWT-00-00000D0HH20E5
G4
840
945
MKRAWT-00-00000D00G40E5
MKRAWT-00-00000D0BG40E5
MKRAWT-00-00000D0HG40E5
H4
970
1091
MKRAWT-00-00000D0BH40E6
MKRAWT-00-00000D0HH40E6
H2
900
1012
MKRAWT-00-00000D0BH20E6
MKRAWT-00-00000D0HH20E6
G4
840
945
MKRAWT-00-00000D0BG40E6
MKRAWT-00-00000D0HG40E6
G2
780
877
H4
970
1091
MKRAWT-00-00000D0BH40E7
H2
900
1012
MKRAWT-00-00000D0BH20E7
MKRAWT-00-00000D0HH20E7
G4
840
945
MKRAWT-00-00000D0BG40E7
MKRAWT-00-00000D0HG40E7
G2
780
877
F4
730
821
MKRAWT-00-00000D0UF40E7
F2
680
765
MKRAWT-00-00000D0UF20E7
E4
635
714
MKRAWT-00-00000D0UE40E7
E2
590
664
MKRAWT-00-00000D0UE20E7
4000 K
3500 K
3000 K
80 CRI Minimum
90 CRI Minimum
MKRAWT-00-00000D0HG20E6
MKRAWT-00-00000D0HG20E7
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp ® MK-R LEDs
Flux Characteristics, ANSI White Order Codes and Bins - 12 V (If = 700 mA, TJ = 85 °C) - Continued
Chromaticity
Kit
E8
CCT
Minimum Luminous
Flux**
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
H2
900
1012
MKRAWT-00-00000D0HH20E8
G4
840
945
MKRAWT-00-00000D0HG40E8
G2
780
877
MKRAWT-00-00000D0HG20E8
F4
730
821
MKRAWT-00-00000D0HF40E8
F2
680
765
MKRAWT-00-00000D0UF20E8
E4
635
714
MKRAWT-00-00000D0UE40E8
E2
590
664
MKRAWT-00-00000D0UE20E8
D4
550
619
MKRAWT-00-00000D0UD40E8
2700 K
65 CRI Typical
70 CRI Minimum
80 CRI Minimum
90 CRI Minimum
Notes:
• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 29).
• For information on chromaticity bins contained in the kits listed above, please reference the Performance Groups - Chromaticity
section starting on page 21.
* Flux values @ 25 °C are calculated and for reference only.
** Cree XLamp MK‑R LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher
than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity restrictions
specified by the order code.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp ® MK-R LEDs
Relative Spectral Power
Relative Spectral Power Distribution (6 V, 1400 mA; 12 V, 700 mA; TJ= 85 °C)
100%
Relative Radiant Power
80%
60%
Cool White
Neutral White
Warm White
40%
20%
0%
380
430
480
530
580
630
680
Relative Flux
Output
vs.
Junction
Temperature
730
780
Wavelength (nm)
Relative Flux vs. Junction Temperature (6 V, IF = 1400 mA; 12 V, IF = 700 mA)
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp ® MK-R LEDs
Electrical Characteristics (Tj = 85ºC)
Electrical Characteristics (TJ = 85 °C)
2500
Forward Current (mA)
2000
1500
6V
1000
500
0
5.25
5.50
5.75
6.00
6.25
Forward Voltage (V)
1250
Forward Current (mA)
1000
750
12 V
500
250
0
10.5
11.0
11.5
12.0
12.5
Forward Voltage (V)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp ® MK-R LEDs
Relative Intensity vs. Current (Tj = 85ºC)
Relative Flux vs. Current (TJ = 85 °C)
180%
Relative Luminous Flux
150%
120%
6V
90%
60%
30%
0%
0
500
1000
1500
2000
2500
Forward Current (mA)
180%
Relative Luminous Flux
150%
120%
12 V
90%
60%
30%
0%
0
250
500
750
1000
1250
Forward Current (mA)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp ® MK-R LEDs
Relative Chromaticity Vs. Current - Warm White
Relative Chromaticity vs. Current - Warm White (TJ = 85 °C)
0.020
0.016
6V
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
500
1000
1500
2000
2500
Current (mA)
0.020
0.016
12 V
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
250
500
750
1000
1250
Current (mA)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp ® MK-R LEDs
Relative Chromaticity Vs. Temperature - Warm White
ΔCCx
Relative Chromaticity vs. Temperature - Warm White (6 V, IF = 1400 mA; 12 V, IF = 700 mA)
0.020
0.016
0.012
0.008
0.004
ΔCCx
0.000
ΔCCy
-0.004
-0.008
-0.012
-0.016
-0.020
0
25
50
75
100
125
150
Tsp (°C)
Typical Spatial Radiation Pattern
Typical Spatial Distribution
Relative Luminous Intensity
100%
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
Angle (º)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp ® MK-R LEDs
Thermal Design
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
3000
Maximum Current (mA)
2500
2000
1500
6V
1000
Rj-a = 2°C/W
Rj-a = 4°C/W
500
Rj-a = 6°C/W
Rj-a = 8°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
1500
Maximum Current (mA)
1250
1000
12 V
750
500
Rj-a = 2°C/W
Rj-a = 4°C/W
250
Rj-a = 6°C/W
Rj-a = 8°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp ® MK-R LEDs
Performance Groups - Luminous Flux (Tj = 85 °C)
XLamp MK-R LEDs are tested for luminous flux and placed into one of the following bins.
Group Code
Minimum Luminous Flux
Maximum Luminous Flux
D2
510
550
D4
550
590
E2
590
635
E4
635
680
F2
680
730
F4
730
780
G2
780
840
G4
840
900
H2
900
970
H4
970
1040
J2
1040
1120
J4
1120
1200
K2
1200
1290
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp ® MK-R LEDs
Performance Groups - Chromaticity (Tj = 85 °C)
XLamp MK‑R LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
EasyWhite Color Temperatures – 4-Step
Code
50H
45H
40H
35H
30H
27H
CCT
5000 K
4500 K
4000 K
3500 K
3000 K
2700 K
EasyWhite Color Temperatures – 2-Step
x
y
0.3407
0.3459
0.3415
0.3586
0.3499
0.3654
0.3484
0.3521
0.3674
0.3772
0.3582
0.3710
0.3562
0.3573
0.3642
Code
x
y
0.3429
0.3507
0.3434
0.3571
0.3475
0.3604
0.3469
0.3539
0.3643
0.3720
0.3597
0.3689
0.3587
0.3620
0.3625
0.3628
0.3647
50F
45F
CCT
5000 K
4500 K
0.3744
0.3685
0.3784
0.3741
0.3782
0.3837
0.3804
0.3818
0.3912
0.3917
0.3867
0.3857
0.3863
0.3758
0.3844
0.3778
0.3981
0.3800
0.4030
0.3857
0.4040
0.3966
0.4061
0.3941
0.4186
0.4037
0.4132
0.3976
0.4116
0.3865
0.4099
0.3890
40F
35F
4000 K
3500 K
0.4242
0.3919
0.4291
0.3973
0.4322
0.4096
0.4333
0.4062
0.4449
0.4141
0.4395
0.4084
0.4359
0.3960
0.4351
0.3994
0.4475
0.3994
0.4528
0.4046
0.4573
0.4178
0.4578
0.4138
0.4695
0.4207
0.4638
0.4152
0.4589
0.4021
0.4586
0.4060
30F
27F
3000 K
2700 K
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp ® MK-R LEDs
Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED
ANSI White Bins
Code
CCT
Bin
Code
0A0
0B0
051
6200 K
0C0
0D0
Bin
Code
x
y
0.2920
0.3060
0.2984
0.3133
0.3009
0.3042
0R0
x
y
0.2950
0.2970
0.3009
0.3042
0.3037
0.2937
Bin
Code
1A0
x
y
0.3048
0.3207
0.3130
0.3290
0.3144
0.3186
Bin
Code
1R0
x
y
0.3068
0.3113
0.3144
0.3186
0.3161
0.3059
0.2950
0.2970
0.2980
0.2880
0.3068
0.3113
0.3093
0.2993
0.2895
0.3135
0.2870
0.3210
0.3028
0.3304
0.3005
0.3415
0.2962
0.3220
0.2937
0.3312
0.3115
0.3391
0.3099
0.3509
0S0
1B0
1S0
0.2984
0.3133
0.2962
0.3220
0.3130
0.3290
0.3115
0.3391
0.2920
0.3060
0.2895
0.3135
0.3048
0.3207
0.3028
0.3304
0.2962
0.3220
0.2937
0.3312
0.3115
0.3391
0.3099
0.3509
0.3028
0.3304
0.3048
0.3207
0T0
0.3005
0.3415
0.3028
0.3304
1C0
0.3205
0.3481
0.3213
0.3373
1T0
0.3196
0.3602
0.3205
0.3481
0.2984
0.3133
0.2962
0.3220
0.3130
0.3290
0.3115
0.3391
0.2984
0.3133
0.3009
0.3042
0.3130
0.3290
0.3144
0.3186
0.3048
0.3207
0.3068
0.3113
0.3213
0.3373
0.3221
0.3261
0.3068
0.3113
0.3009
0.3042
0U0
0.3093
0.2993
0.3037
0.2937
1D0
0.3221
0.3261
0.3144
0.3186
x
y
.3371
.3490
1U0
0.3231
0.3120
0.3161
0.3059
ANSI White Bins
Code
CCT
Bin
Code
2A0
2B0
051
6200 K
2C0
2D0
x
y
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
Bin
Code
2R0
x
y
0.3222
0.3243
0.3290
0.3300
0.3290
0.3180
Bin
Code
3A0
.3451
.3554
.3440
.3427
0.3222
0.3243
0.3231
0.3120
.3366
.3369
0.3207
0.3462
0.3196
0.3602
.3376
.3616
0.3290
0.3538
0.3290
0.3690
.3463
.3687
2S0
3B0
0.3290
0.3417
0.3290
0.3538
.3451
.3554
0.3215
0.3350
0.3207
0.3462
.3371
.3490
0.3290
0.3538
0.3290
0.3690
.3463
.3687
0.3376
0.3616
0.3371
0.3490
2T0
0.3381
0.3762
0.3376
0.3616
3C0
.3551
.3760
.3533
.3620
0.3290
0.3417
0.3290
0.3538
.3451
.3554
0.3290
0.3417
0.3290
0.3300
.3451
.3554
0.3371
0.3490
0.3366
0.3369
.3533
.3620
0.3366
0.3369
0.3290
0.3300
2U0
0.3361
0.3245
0.3290
0.3180
3D0
.3515
.3487
.3440
.3427
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp ® MK-R LEDs
Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED
Code
ANSI White Bins
ANSI White Bins
Bin
Code
Bin
Code
CCT
1A0
1B0
0E1
6500 K
1C0
1D0
x
y
0.3048
0.3130
0.3144
0.3186
Code
CCT
CCT
Bin
Code
4A0
4B0
0E4
4500 K
4C0
4D0
0.3350
.3371
.3490
0.3417
.3451
.3554
.3440
.3427
0.3207
0.3215
0.3290
0.3290
0.3290
Bin
Code
CCT
y
y
2A0
Code
x
x
3A0
0.3300
0.3068
0.3113
0.3222
0.3243
.3366
.3369
0.3028
0.3304
0.3207
0.3462
.3376
.3616
0.3115
0.3391
0.3290
0.3538
.3463
.3687
0.3130
0.3290
0.3290
0.3417
.3451
.3554
0.3048
0.3207
0.3215
0.3350
.3371
.3490
0.3115
0.3391
0.3290
0.3538
.3463
.3687
0.3205
0.3481
0.3376
0.3616
.3551
.3760
0.3213
0.3373
.3533
.3620
0.3130
0.3130
0.3213
0.3373
0.3221
0.3261
0.3144
0.3186
2B0
0E2
5700 K
2C0
3B0
0E3
5000 K
3C0
0.3371
0.3490
0.3290
0.3290
0.3417
.3451
.3554
0.3290
0.3290
0.3417
.3451
.3554
0.3371
0.3490
.3533
.3620
0.3366
0.3369
.3515
.3487
0.3290
0.3300
.3440
.3427
x
y
2D0
ANSI White Bins
Code
ANSI White Bins
3D0
ANSI White Bins
x
y
.3530
.3615
.3590
.3521
.3512
.3465
.3548
.3641
.3615
.3659
Code
CCT
Bin
Code
ANSI White Bins
Code
CCT
Bin
Code
x
y
.3597
.3670
.3578
.3889
.3690
.3659
.3702
.3722
.3941
.3848
.3825
.3798
.4080
.3916
.3783
.3646
.4017
.3751
.3736
.3702
.3722
.3941
.3848
.3804
.3736
.3874
.3996
.4015
.3869
.3958
.4146
.4089
.3530
.3597
.3641
.3804
.3736
.3874
.3702
.3722
.3615
.3659
.3668
.3771
.3736
.3874
.3641
.3804
5A0
5B0
.3825
.3798
.3825
.3798
.3869
.3958
.4006
.4044
.3950
.3875
.3957
.3783
.4034
.3825
.3950
.3875
.3898
.3716
0E5
4000 K
5C0
5D0
6A0
6B0
.4080
.3916
.4080
.3916
.4146
.4089
.4299
.4165
.4221
.3984
.3646
.4017
.3751
.3798
.4080
.3916
.4221
.3984
.4147
.3814
0E6
3500 K
6C0
6D0
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp ® MK-R LEDs
Performance Groups - Chromaticity (Tj = 85 °C) - cONTINUED
ANSI White Bins
Code
Bin
Code
CCT
7A0
7B0
0E7
ANSI White Bins
3000 K
7C0
7D0
Code
x
y
.4147
.4221
.4342
.4028
.4259
.3853
.4221
.4299
.4430
.4212
Bin
Code
CCT
x
y
.3814
.4373
.3893
.3984
.4465
.4071
.4582
.4099
.4483
.3919
.3984
.4465
.4071
.4165
.4562
.4260
.4687
.4289
.4342
.4028
.4342
.4028
.4430
.4212
.4562
.4260
.4465
.4071
.4259
.4342
.4465
.4071
.4373
.3893
8A0
8B0
.4582
.4099
.4582
.4099
.4687
.4289
.4813
.4319
.4700
.4126
.3853
.4483
.3919
.4028
.4582
.4099
.4700
.4126
.4593
.3944
0E8
2700 K
8C0
8D0
Cree EasyWhite® Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.45
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
0.44
2700 K
3000 K
0.43
3500 K
0.42
4000 K
4500 K
0.41
CCy
0.40
5000 K
0.39
5700 K
0.38
0.37
0.36
0.35
0.34
0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp ® MK-R LEDs
Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C)
0.45
0.44
0.43
2600 K
3000 K
3200 K
0.42
3500 K
7B
4000 K
0.40
6C
4300 K
0.39
0.37
4B
3B
ANSI
C78.377A
4D
4A
3D
0.35
6A
5D
5A
3C
0.36
7A
6D
5B
4C
8D
8A
7D
5C
4750 K
5300 K
0.38
6B
4500 K
5000 K
8C
8B
7C
3700 K
0.41
CCy
2700 K
2900 K
3A
0.34
0.33
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
0.32
CCx
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
8000 K
0T
0.33
0S
0B
0.31
0.30
3R
2A
1D
2U
2R
1A
0D
0A
2D
1C
1B
0C
3A
2B
1S
0.34
0.32
2C
1T
0.35
CCy
3B
2S
ANSI
C78.377A
1U
1R
0U
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp ® MK-R LEDs
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
6500 K
0T
0C
0D
CCy
0.31
1R
ANSI
C78.377A
2R
1U
1R
0U
0.30
0.36
0.28
0.36
0.35
0.34
0.33
0.32
0.28
0.31
0.28
0.30
0.29
0.35
0R
0R
0.29
2U
1A
0D
0A
0U
0.29
0.28
0C
0B
1D
0.34
0.30
0S
0.32
3R
2A
1B
0.33
0A
1U
3A
2D
1C
0.32
0.31
ANSI
C78.377A
2R
1A
0T
0.33
2U
1D
2C
2B
1S
0.31
0B
3R
2A
1B
3B
2S
1T
8000 K
0.34
0.30
0S
0.32
2D
1C
0.29
0.33
3A
2B
1S
3S
2T
E1
0.35
2C
8000 K
0.34
0.36
3B
1T
5700 K
E2
0.37
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
CCx
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
0.36
E4
4B
3C
4D
3B
5C3
5C2
5B1
6B2
5D3 6A2
5D2
5A3
5D4 6A1
5A2
5D1
5A4
5A1
6A3
6A4
6D2
6D1
7B1
6C4
6C1
6B4
5C4 6B1
5C1
5B4
4C
6C2
6B3
5B3
5B2
6C3
6D3
6D4
7A2
7A1
7A4
7B4
7A3
7D1
7C2
7B3
7B2
7C1
7D4
8B1
7C4
7D3
7D2
7C3
8A1
8A2
8A3
8B2
E8
8B3
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
8A4 8D1
ANSI
C78.377A
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp ® MK-R LEDs
Bin and Order Code Formats
Bin codes and order codes are configured as follows.
Order CodeBin Code
Series = MKR
Series = MKR
Internal code
Internal code
Forward voltage class
B=6V
D = 12 V
Luminous flux group
CRI specification
B = 70-CRI minimum
H = 80-CRI minimum
U = 90-CRI minimum
0 = No minimum
SSSCCC-HH-HHHH-GHKLNNNNN
Kit code
Internal code
Color
AWT = White
Internal code
SSSCCC-E-DDD-MM-HK-L-PP
CRI specification
B = 70-CRI minimum
H = 80-CRI minimum
U = 90-CRI minimum
0 = No minimum
Forward voltage class
B=6V
D = 12 V
Chromaticity bin
Color
AWT = White
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp ® MK-R LEDs
Reflow Soldering Characteristics
In testing, Cree has found XLamp MK-R LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
IPC/JEDEC J-STD-020C
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp ® MK-R LEDs
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Pre‑Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM‑80 data sets available for this LED, refer to the LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MK-R LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp ® MK-R LEDs
Notes - Continued
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp ® MK-R LEDs
6
5
4
3
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
Mechanical Dimensions
Thermal vias, if present, are not shown on these drawings.
D
All measurements are ±.13 mm unless otherwise indicated.
7.00
4.08
6.70
.73
6
5
5
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
3
4
3
MAY4NOT BE COPIED,
REPRODUCED OR DISCLOSED
TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
4
D
4.08
4.08
.73
.73
.73
4
3
2
2
2
1
1
REVISONS
7.00
3
REVISONS
1
REVISONS
REV
REV
BY
DATEBY
DATEBY
APP'D
B
B
VIEWS
SHOW
LATEST
REVISION
VIEWS
SHOW
LATEST REVISIONDC
VIEWSBSHOW
LATEST
REVISION
DC
8/5/13
8/5/13
DC
D
D
NOTCH
ADDED
D IS ADDED
NOTCHTO
IS BACKSIDE
ADDED TO BACKSIDE
DC
NOTCH
TOISBACKSIDE
DC
7/7/14
7/7/14
DC
7/7/14
E
E
UPDATED
VIEWS ALL VIEWS
EUPDATED ALL
UPDATED
VIEWS ALL
DC
6/19/15
6/19/15
DC
6/19/15
REV
DESCRIPTION
DESCRIPTION DESCRIPTION
DC
APP'D
DATE
6.70
6.70
4.08
6.70
REF.
.70
6.70
REF.
.70
Side View
.73
6.70
.70 .70 .70 .70
.70
R 3.25
Top View
6.70
.70
6.70
REF.
6.70
6.70
3.90D
.70
D
.70
6.76
6.76
6.76
6.76
REF.
6.76
REF.
C
.70
6.76.25
REF.
Anode
.70
3.90
6.76
3.90
Alternate
Bottom
ALTERNATIVE
ALTERNATIVE
ALTERNATIVE
Alternate
Bottom
View
ALTERNATIVE
ALTERNATIVE
ALTERNATIVE
3.90
.25
.70
ALTERNA
6.70
View
1.24
1.29
.70 6.70
.70
.25
A
.70 B
.25
.25
PRIMARY
3.90
.70
.25
C
3.90
Anode
6.76
Bottom
View
PRIMARY PRIMARYPRIMARY
0
.76
.70
6.76
REF.
C
C
1.29
.70
R 3.25
6.76
REF.
6.76
REF.
B
Anode
6.70
REF.
D
6.76
.70
.70
6.76
PRIMARY
6.70
7.00
R 3.25
APP'D
8/5/13
C
7.00
4.08
.70
.70
RECOMMENDED STENCIL PATTERN
SHADED AREA IS OPENING1.29
RECOMMENDED PCB SOLDER PAD
.70
UNLESS
D
MILLIMET
TOLERA
B ANGLE PROJECTION
B
THIRD
B
1.29
6.76
1.29
1.29
6.76
FOR SH
.25
SURFA
6.76
6.76
.25
.25
.25
6
5
4
3.90
1.29
1.29
6.70
A
1.29
6.70
6.70
1.24
1.24
1.29
6.70
1.24
3
6.70
1.24
RECOMMENDED PCB SOLDER PAD
Recommended PCB Solder Pad
DRAWN BY
UNLESS OTHERWISE SPECIF
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FIN
TOLERANCE UNLESS SPECIF
.XX
±
.2
.XXX ±
.1
X°
±
.5
RECOMMENDED STENCIL PATTERN
Recommended
Stencil Pattern
SHADED AREA IS OPENING
DRAWN
BY
DATE
(Shaded Area Is Open)
DRAWNDATE
BY
DATE
UNLESS
OTHERWISE
SPECIFIED
UNLESS
OTHERWISE SPECIFIED
UNLESS OTHERWISE
SPECIFIED
4600 Silicon Drive 4600 Silicon Drive4600 Silicon Drive
11/7/12
11/7/12
11/7/12 D. CRONIN
DIMENSIONS
ARE
IN D. CRONIN
DIMENSIONS
ARE IN D. CRONIN
DIMENSIONS ARE
IN
THIRD
ANGLE
Durham,
N.C 27703
Durham, PROJECTION
N.C 27703
Durham, N.C 27703
CHECKDATE
CHECK DATE
DATE
FOR SHEET METAL PARTS O
MILLIMETERS
AND
AFTER FINISH.
CHECK
MILLIMETERS
AND AFTER FINISH.
MILLIMETERS AND
AFTER FINISH.
Phone (919) 313-5300
Phone (919) 313-5300
Phone (919) 313-5300
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED
STENCIL
PATTERN
RECOMMENDED STENCIL PATTERN
TOLERANCE
UNLESS
SPECIFIED:
.X
±
1
TOLERANCE
UNLESS SPECIFIED:
TOLERANCE UNLESS
SPECIFIED:
Fax (919) 313-5558
Fax (919) 313-5558Fax (919) 313-5558
.XX
±
.7
±
.25
.XX
±
.25
APPROVED
DATE
SHADED
AREA IS OPENING
.XX
±
.25.XX
APPROVED
DATE
SHADED
AREA IS OPENING
APPROVED
DATE
SHADED AREA
IS OPENING
A
A
A
.XXX ±
.2
TITLE
.XXX ±
.125
TITLE ®
.XXX without
±
.125 notice. Cree
®
®
3
®
TITLE
.XXXis subject
±
.125
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document
to± change
,
XLamp
,
EasyWhite
and
SC
Technology
are
registered
trademarks
and
X°
±
.5
X°
.5
°
X°
±
.5 °
X°
±
.5 °
®
THIRD
ANGLE
PROJECTION
THIRD ANGLE
PROJECTIONof UL LLC.
ANGLE
PROJECTION
the Cree logo is a trademark of Cree, Inc. UL andTHIRD
the UR
logo
are registered
trademarks
MATERIAL
MATERIAL
1.6
MATERIAL
FOR
SHEET
METAL
PARTS
ONLY
FOR
SHEET
METAL
PARTS
ONLY
SURFACE
FINISH:
FOR SHEET METAL PARTS ONLY
1.5
.X
±
1.5
.X
±
1.5.X 5 ±
6
4 NO.SIZE DRAWING NO. DRAWING NO.
3
REV.
REV.
SIZE DRAWING
REV.
SIZE
±
.75
.XX
±
.75
.XX
±
.75.XX
.25
FINAL PROTECTIVE FINISH
.XXX
± FINISH
.25
FINAL PROTECTIVE FINISH
.XXX ±
.25.XXX ±
FINAL
PROTECTIVE
X°
±
.5
°
X°
±
.5 °
X°
±
.5 °
MKR Marketing
Spec Spec
MKR Marketing
MKR Marketing
Spec
C
C
1.6FINISH:
SURFACE
SURFACE1.6
FINISH:
SURFACE FINISH:
1.6
SCALE
11.000
SCALE
11.000
2610-00031
2610-00031
C 2610-00031
E
E
SCALE
11.000
SHEET
OF SHEET
1 /1
OF SHEET
1 /1
E
OF
1 /1
31
XLamp ® MK-R LEDs
6
5
NOTICE
CREE
CONFIDENTIAL.
THIS PLOT AND THE INFORMATION
Tape
and
Reel
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON
THE WRITTEN
WITHOUT
CONSENT
OF CREE INC.
4
3
2
REV
A
1
REVISONS
DESCRIPTION
Initial Release
BY DATEAPP'D
DC 12/7/12
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
D
D
Ø 1.5 ±.1
User Feed Direction
12 ±.1
END
4 ±.10
1.75
±.10
START
CATHODE SIDE
4.31
16
+.3
-.0
C
7.4
C
0.36
ANODE SIDE
Trailer
180 mm (min) of
empty pockets
6
sealed with tape
NOTICE
CREE CONFIDENTIAL. THIS (15
PLOTpockets
AND THE INFORMATION
min.)
CONTANED WITHIN ARE THE PROPRIETARY AND
Loaded Pockets
(1000 Lamps)
5
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
4
3
Leader
420 mm (min) of
empty pockets
sealed with tape
(35 pockets min.)
User Feed Direction
2
1
2400-00009
INDEX
QTY
ITEM
1
2
1
2
2400-00009-CORE
2400-00009-REEL
COMMENTS
B
B
D
D
Ø 13 mm
A
Ø 13”
C
330
+.25
-.75
6
5
4
DRAWN
BY
DATE
UNLESS OTHERWISE
SPECIFIED
4600 Silicon Drive
D.IN
CRONIN
12/7/12
DIMENSIONS ARE
Durham, N.C 27703
CHECK
DATE
MILLIMETERS
AND
AFTER
FINISH.
Phone (919) 313-5300
12.4
TOLERANCE UNLESS SPECIFIED:
--Fax (919) 313-5558
C
+.2
.XX± .25
APPROVED
DATE
A
TITLE
.XXX± .125
.0
--X
°
±
.5
°
MKR LOADING SPEC
MEASURED AT HUBTHIRD ANGLE PROJECTION
FOR SHEET METALMATERIAL
PARTS ONLY
.X ± 1.5
REV.
SIZE DRAWING NO.
-.XX± .75
.XXX± .25
FINAL PROTECTIVECFINISH 2402-00025
A
X° ± .5°
SCALE
SHEET
OF
1.6
SURFACE FINISH:
-3.000
1/1
3
2
16.4
+0.2
.0
MEASURED AT HUB
1
1.9±.4
21 ±.4
13.1 ±.2
B
B
12.4
+1.0
-.5
MEASURED AT EDGE
60°
60°
REVISONS
REV
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.01
.XXX ±
.005
X°
±
.5 °
BY
DESCRIPTION
DATE
APP'D
DATE
DRAWN BY
D. CRONIN
4600 Silicon Drive
Durham, N.C 27703
09/29/09
CHECK
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
A
DATE
APPROVED
--
--
TITLE
REEL, 13" X 12MM, 3 PIECE SNAP
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp , EasyWhite and SC Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
THIRD ANGLE PROJECTION
METAL PARTS ONLY ®MATERIAL
® FOR SHEET ®
3
.X
±
.06
ANTI-STATIC HIPS
.XX ±
.03
.XXX ±
.010
FINAL PROTECTIVE FINISH
X°
±
.5 °
SURFACE FINISH:
6
5
4
3
63
-
2
SIZE
SCALE
C
0.500
REV.
DRAWING NO.
2400-00009
SHEET
1
A
OF
32
1 /1
XLamp ® MK-R LEDs
Packaging
Humidity Indicator
Card (inside bag)
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp®, EasyWhite® and SC3 Technology® are registered trademarks and
the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
33
Similar pages