STMicroelectronics AVS100CB Automatic voltage switch smps < 300w Datasheet

AVS20
AVS200
AUTOMATIC VOLTAGE SWITCH (SMPS < 300W)
..
..
.
.
.
..
.
..
CONTROLLER
50/60Hz FULL COMPATIBILITY
INTEGRATED VOLTAGE REGULATOR
TRIAC TRIGGERING BY PULSE TRAIN
HIGH IMMUNITY TO AC DISTURBANCES
(SPIKES, MISSING CYCLE)
HIGH RELIABILITY ON LINE VOLTAGE DETECTION (PARASITIC FILTER ON SIGNAL INPUT)
FAST DIGITAL START-UP TIME
(< 2 LINE CYCLES)
LOW POWER CONSUMPTION
P
DIP8
(Plastic Package)
ORDER CODE : AVS2ACP08
TRIAC
HIGH EFFICIENCY AND SAFETY SWITCHING
UNINSULATED PACKAGE :
AVS10CB/AVS100CB
INSULATED PACKAGE (2500VRMS) :
AVS10CBI
VDRM = ±600V (AVS10CB), ±800V (AVS100CB)
IT(RMS) : 8A
B
TO220AB
(Plastic Package)
DESCRIPTION
The AVS20 (AVS200) kit is an automatic mains
selector (120/230V AC) to be used in SMPS with
input power < 300 W. It is composed of 2 devices :
• The Controller is optimized for low consumption
and high security triggering of the triac. When
connected to VSS, the mode input activates an
additional option “the latched option”. If the
main power drops from 230V to 120V, the triac
control remains locked to the 230V mode and
avoids any high voltage spike when the voltage
is restored to 230V.
When connected to VDD, the mode input desactivates this option “this is the follower option”.
• The TRIAC is specially designed for this application. An optimization between sensitivity and
dynamic parameters of the triac gate highly reduces the losses of supply resistor and allows
excellent immunity against line disturbances.
ORDER CODES : AVS10CB-AVS10CBI-AVS100CB
PIN CONNECTIONS
DIP8
VSS
1
8
VM
Osc/ In
2
7
Mode
Osc/Out
3
6
NC
VDD
4
5
VG
AVS20-01.EPS
July 1992
1/8
AVS20 - AVS200
BLOCK DIAGRAM
MODE
7
V SS 1
R
SUPPLY
RESET
RST
CK
V DD 4
LATCHED
MODE
CONTROL
A2
PEAK LINE VOLTAGE DETECTOR
VM 8
4.25
2
MAINS
R
MODE
CK CONTROLLER
PARASITIC
FILTER
AVS10CB
AVS10CBI
VG
0.05
or
3
5
PARASITIC
FILTER
G
1
R
0.25
PARASITIC
FILTER
CK
AVS100CB
A1
TRIAC
TRIGGERING
WINDOW
4
V DD
CROSSING DETECTOR
OSC/IN 2
CLOCK
10
OSC/OUT 3
AVS2ACP08
AVS20-02.EPS
Symbol
VSS
VI / VO
II / IO
Tstg
Top er
Parameter
Supply voltage
I / O voltage
I / O current
Storage Temperature
Operating Temperature code “ C ”
Min.
- 12
VSS - 0.5
- 40
- 60
0
Max.
0.5
0.5
+ 40
+ 150
+ 70
Unit
V
V
mA
°C
°C
AVS20-01.TBL
ABSOLUTE MAXIMUM RATINGS
CONTROLLER AVS2ACP08
Symbol
VDRM
IT(RMS)
ITSM
2
It
di/dt
dv/dt (3)
Tstg
Tj
Parameter
Repetitive peak off-state voltage (2)
AVS10
AVS100
RMS on-state current (360° conduction angle)
TC = 80°C, AVS10CB/AVS100CB
TC = 70°C, AVS10CBI
Non repetitive surge peak on-state current ( Tj initial = 25°C )
t = 8.3ms
t = 10ms
2
I t value (t = 10ms)
Critical rate of rise of on-state current (1)
Repetitive f = 50Hz
Non Repetitive
Linear slope up to 400V (Gate open) (Tj = 70°C)
AVS10
AVS100
Storage Temperature
Operating Junction Temperature
(1) Gate supply : IG = 100mA – di/dt = 1A /µs
(2) Tj = 110°C
(3) For either polarity of electrode A2 voltage with reference to electrode A1
2/8
Value
Unit
±600
±800
V
V
8
8
A
A
85
80
32
A
A
2
As
20
100
A/µs
A/µs
75
150
-40, +150
0, +110
V/µs
V/µs
o
C
o
C
AVS20-02.TBL
TRIAC AVS10CB / AVS10CBI / AVS100CB Tj = +25°C (unless otherwise specified)
AVS20 - AVS200
THERMAL RESISTANCES
TRIAC AVS10CB / AVS10CBI / AVS100CB
R th (j-c) AC
Parameter
Value
60
Junction-to-ambient
Junction-to-case for DC
AVS10CB / AVS100CB
AVS10CBI
Junction-to-case for 360° conduction angle ( f = 50Hz)
AVS10CB / AVS100CB
AVS10CBI
Unit
C/W
o
3.5
4.4
o
C/W
o
2.6
3.3
o
C/W
o
C/W
C/W
AVS20-03.TBL
Symbol
R th (j-a)
Rth (j-c) DC
Symbol
VGD
VTM (1)
IDRM (1)
Parameter
VD = VDRM R L = 3.3kΩ Pulse duration> 20µs (Tj = 110°C)
ITM = 11A (tp = 10ms, Tj = 25°C)
VDRM rated Gate open
AVS10/AVS100
Tj = 25°C
Tj = 110°C AVS10
Tj = 700°C AVS100
Min.
0.2
Max.
1.75
Unit
V
V
10
500
500
µA
µA
µA
AVS20-04.TBL
DC GENERAL ELECTRICAL CHARACTERISTICS
TRIAC AVS10CB / AVS10CBI / AVS100CB
CONTROLLER AVS2ACP08 Toper = 25°C (unless otherwise specified)
Symbol
Parameter
Min.
Typ.
Max.
Unit
- 10
0.4
-9
-8
30
V
mA
0.6
0.7
mA
44
46
kHz
MAIN CHARACTERISTICS
VSS (pin 1) (Vreg)
ISS (pin 1) (Vreg)
(@ VSS = -9V)
ISS (pin 1)
(@ triac gate non connected)
F (pin 3)
(@ R = 91kΩ) (C = 100pF)
VPWRON (2)
VPWROFF (2)
Mode (pin 7)
VG (pin 5)
Shunt Regulator Voltage
Supply Current
Quiescent Current
Oscillator Frequency
Power-on-reset Threshold
Power-off-reset Threshold
VIL
(2)
(2)
VIH
VOL (IVG = 25mA)
Leakage Current (VG = VDD)
42
0.89 Vreg
4.6
V
0.3 Vreg
0.7 Vreg
650
+ 10
mV
µA
PEAK LINE VOLTAGE DETECTOR
VSWON (pin 8)
VSWOFF (pin 8)
tON (pin 5)
Low Threshold of Trip Point
(switching-on of triac triggering) (3)
High Threshold of Trip Point
(switching-off of triac triggering) (3)
Triac Turn-on Delay Time
(VAC = 120V)
3.89
4.05
4.22
V
4.08
4.25
4.42
V
2
Line
cycles
1
V0CRPH (pin8)
V0CRPL (pin8)
V0CRNH (pin8)
V0CRNL (pin8)
High Threshold on Positive AC Side (3)
Low Threshold on Positive AC Side (3) (4)
High Threshold on Negative AC Side (3)
Low Threshold on Negative AC Side (3) (4)
250
200
100
60
mV
mV
mV
mV
NOTES :
(1) : For either polarity of electrode A2 voltage with reference to electrode A 1.
(2) : Voltage referred to VDD.
(3) : Voltage referred to VSS.
(4) : These values give a typical noise immunity on the zero-crossing detection of 100mV x
1018
= 5.65V on the mains supply.
18
3/8
AVS20-05.TBL
ZERO VOLTAGE CROSSING DETECTOR
AVS20 - AVS200
Figure 1: Maximum RMS power dissipation
versus RMS on-state current (f=60Hz)
(Curves are cut-off (di/dt)c limitation)
Figure 2a : Correlation between maximum mean
power dissipation and maximum
allowable temperatures (TA and TC)
for different thermal resistances
heatsink + contact
(AVS10CB/AVS100CB)
AVS20-03.EPS
AVS20-04.EPS
Figure 2b : Correlation between maximum mean
power dissipation and maximum
allowable temperatures (TA and TC)
for different thermal resistances
heatsink + contact (AVS10CBI)
AVS20-03.EPS
Figure 3 : Non-repetitive surge peak on-state
current for a sinusoidal pulse with
width : t ≤2 10ms, and corresponding
value of I t.
AVS20-06.EPS
4/8
AVS20-05.EPS
Figure 4 : On-state characteristics
(maximum values).
AVS20-07.EPS
AVS20 - AVS200
POWER-ON AND POWER-OFF RESET BEHAVIOUR
Power-on reset
Undetermine d
Power-off
Undetermined
Reset
Normal operation
0V
0V
-3V
-3V
VPWROFF
VPWRON
Vreg = VSS - V DD
AVS20-08.EPS
TYPICAL APPLICATION DIAGRAM
110 V
or
220V
NTC
NTC
1N
4007
2
x
9.1K
1W
AVS10CB/CBI
option VDD or AVS100CB
R1
1M
1%
VM
VSS
7
5
8
AVS2ACP08
R2
18K
1%
A2
390
G
VG
A1
4
3
2
1
91k 1 %
VDD
VSS
33 µF
16V
100pF 5 %
AVS20-09.EPS
AVS20
ORDERING INFORMATION
AVS20/AVS200
CONTROLLER
AVS 2A
AUTOMATIC
VOLTAGE
SWITCH
TRIAC
C
P08
PACKAGE :
DIP8
IDENTIFICATION
OPERATING TEMPERATURE :
C = 0/70 C
AVS 10
AUTOMATIC
VOLTAGE
SWITCH
C
B
I
INSULATED Suffix
PACKAGE B :
UNINSULATED TO220
IDENTIFICATION
10 : VDRM =
600V
100 : VDRM =
800V
OPERATING TEMPERATURE :
C = 0/70 C
AVS20-10.EPS
5/8
AVS20 - AVS200
PACKAGE MECHANICAL DATA
CONTROLLER
8 PINS - PLASTIC DIP
I
L
a1
A
e4
b1
B B1
b
E
e
e3
Z
Z
D
5
1
4
F
8
PM-DIP8.EPS
A
a1
B
b
b1
D
E
e
e3
e4
F
i
L
Z
6/8
Min.
Millimeters
Typ.
3.32
0.51
1.15
0.356
0.204
Max.
1.65
0.55
0.304
10.92
9.75
7.95
Min.
0.020
0.045
0.014
0.008
Max.
0.065
0.022
0.012
0.430
0.384
0.313
2.54
7.62
7.62
3.18
Inches
Typ.
0.131
0.100
0.300
0.300
6.6
5.08
3.81
1.52
0.125
0260
0.200
0.150
0.060
DIP8.TBL
Dimensions
AVS20 - AVS200
PACKAGE MECHANICAL DATA
TRIAC
3 PINS - PLASTIC TO220AB
PM-TOTRI.IMG
Cooling method : by conduction (method C)
Weight : 2 g
7/8
AVS20 - AVS200
NOTES:
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no
responsability for the consequences of use of such information nor for any infringement of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights
of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice.
This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or
systems without the express written approval of SGS-THOMSON Microelectronics.
 1994 SGS-THOMSON Microelectronics - All rights reserved.
Purchase of I2C Components by SGS-THOMSON Microelectronics conveys a license under the Philips I 2C Patent. Rights to use these components in an I2C system is granted provided that the system conforms to the I 2C Standard Specification as defined by Philips.
SGS-THOMSON Microelectronics Group of Companies
Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
8/8
Similar pages