PRODUCT DATASHEET Ronda series last update 12/4/2017 DETAILS Product Number FN15737_RONDA-WWW-B Family Ronda Type Assembly Color white Diameter 69,9 mm Height 14,6 mm Style round Optic Material PMMA Holder Material Fastening Status sample approved ROHS Comliant Yes Date Updated 12/04/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency H12 sim: 80 Asymmetric 82 % V10 Gen7 sim: 90 Asymmetric sim: 82 % sim: 0.440 IDEAL: 50-2002CT V13 Gen7 78 deg Asymmetric 88 % 0.520 - CLL02x/CLU02x (LES10) cd/lm Connector - BJB: 47.319.2131 sim: 90 Asymmetric 86 % - IDEAL: 50-2002CT CXA/B 1816 & CXA/B 1820 & CXA 1850 sim: 90 Asymmetric 87 % - BJB: 47.319.2131 CXA/B 1816 & CXA/B 1820 & CXA 1850 sim: 90 Asymmetric 87 % - IDEAL: 50-3001CR CXA/B 15xx sim: 90 Asymmetric 87 % - IDEAL: 50-2000CR Mini Zenigata (GW6BM) sim: 88 Asymmetric 86 % - IDEAL: 50-2000P SLE G6 LES15 H D50 sim: 75 Asymmetric sim: 80 % sim: 0.450 - May 29th 2017 7:24 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 4 4 Front plate examples Examples Optic D=69.9mm Holder A - Bender-wirth model 4xx Typ L1 - TE 22xxxxx-2 + 2213194-1 - Ledil-clamp - Other twist and lock 2 3 D=49.9 Holder B - BJB 47.319.2xxx 50mm - A.A.G. Stucchi 8xxx/G2 50mm - Ideal chip lok jr 50-20 & 50-30 LES size up to ~14mm, see compatibility www.ledil.com 3 Horizontal fix: M3 Nut + bolt 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. H G 2 Vertical fix: M3 Screw / Twist and lock / Snap Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: See more details on page 2 and 3 Rotation fix Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE RONDA-B family SIZE A3 SCALE 1 PART NUMBER 1:1 WEIGHT - B SHEET A 1/3 A B C D E F G H BJB/Stucchi twist and lock Front panel location suggestion when seamless look needed A 25 3.5 6 4 4 ronda-was 59.3 Detail A 3 14.6 4 3 7.7 Bottom view 12.7 11.2 Front view .9 er 2 Ho ld 69 ic opt 2 2 3. 2 2 . 3. 3 49. 9 9 Top view Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: c c / 6 1 1 45 3.2 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE RONDA-B family SIZE A3 SCALE H G 1 PART NUMBER 1:1 WEIGHT - B SHEET A 2/3 A B C D E F G H 4 OPTIC/HOLDER ASSEMBLY TYPICAL CONNECTOR ASSEMBLY (including solderless BJB 47.319.2xxx 50mm as example) 1. Place pin on the side of the lens into relative hole on the holder. B Holder hole 4 3 1. Assemble LED and BJB connector on heatsink with M3 screw. 2. Attach optic by aligning hooks in the holder with connector holes and turning the optic holder clockwise until it locks. Pin DET B 2. Press the lens under clips on the holder, ensuring both clips are fixed. Clip Pin 2 Clip TYPICAL CONNECTOR ASSEMBLY (including solderless IDEAL chip lok jr 50-20 as example) 1. Assemble LED and IDEAL connector on heatsink with M3 screw. 2. Attach optic by aligning the screw towers in the holder with relative holes in heatsink. Optionally use 2 position pins in the holder bottom as focus element. Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. G 2 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE RONDA-B family SIZE 1 PART NUMBER A3 SCALE H 3 1:1 WEIGHT - B SHEET A 3/3 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.