GS5ABF - GS5MBF SURFACE MOUNT SILICON RECTIFIER DIODES VOLTAGE RANGE: 50 - 1000V CURRENT: 5.0 A Features ! Glass Passivated Die Construction ! ! ! ! ! Ideally Suited for Automatic Assembly Low Forward Voltage Drop Low Power Loss B Built-in Strain Relief Plastic Case Material has UL Flammability C E Classification Rating 94V-O Mechanical Data ! ! Case:SMBF , Molded Plastic Terminals: Solder Plated, Solderable ! per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch ! ! Marking: Type Number Weight: 0.0018 ounces,0.05grams SMBF Dim Min Max Typ A 5.45 5.55 5.50 B 4.27 4.33 4.30 C 3.57 3.63 3.60 D 1.32 1.38 1.35 E 1.96 2.00 1.98 H 0.019 0.021 0.20 L 0.73 0.77 0.75 All Dimensions in mm D H L E A Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol GS5ABF GS5BBF GS5DBF GS5GBF GS5JBF GS5KBF GS5MBF Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current @TL = 75°C IO 5.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage @IF = 5.0A VFM 1.15 V @TA = 25°C @TA = 125°C IRM 10 250 µA Cj 40 pF RJL 10 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 2. Mounted on P.C. Board with 8.0mm2 land area. 1 of 2 www.sunmate.tw IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 5.0 Resistive or inductive load 4.0 3.0 2.0 1.0 0 25 50 75 100 125 10 1.0 0.1 Tj - 25°C IF Pulse Width = 300ms 0.01 0 150 0.4 1.2 0.8 1.6 2.0 TT, TERMINAL TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Current Derating Curve Fig. 2 Typical Forward Characteristics Single Half Sine-Wave (JEDEC Method) 100 80 60 40 20 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve 2 of 2 IR, INSTANTANEOUS REVERSE CURRENT (mA) IFSM, PEAK FORWARD SURGE CURRENT (A) 120 1000 Tj = 125°C 100 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics www.sunmate.tw