ON ESD7382 Esd protection diode Datasheet

ESD7382MUT5G
ESD Protection Diodes
Micro−Packaged Diodes for ESD Protection
The ESD7382 is designed to protect voltage sensitive components
that require ultra−low capacitance from ESD and transient voltage
events. Excellent clamping capability, low capacitance, low leakage,
and fast response time, make these parts ideal for ESD protection on
designs where board space is at a premium. Because of its low
capacitance, it is suited for use in high frequency designs such as
USB 2.0 high speed and antenna line applications.
www.onsemi.com
1
Cathode
2
Anode
Features
Ultra−Low Capacitance: 0.37 pF
Low Clamping Voltage
Small Body Outline Dimensions: 0.60 mm x 0.30 mm
Low Body Height: 0.3 mm
Stand−off Voltage: 5.0 V
Low Leakage
Insertion Loss: 0.030 dBm
Response Time is < 1 ns
Low Dynamic Resistance < 1 W
IEC61000−4−2 Level 4 ESD Protection
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MARKING
DIAGRAM
PIN 1
X3DFN2
CASE 152AF
2
M
2
•
•
•
•
•
•
•
•
•
•
•
M
= Specific Device Code
(Rotated 270°)
= Date Code
X2DFN2
CASE 714AB
(In Development)
XX M
G
XX = Specific Device Code
M = Date Code
G
= Pb−Free Package
Typical Applications
• RF Signal ESD Protection
• RF Switching, PA, and Antenna ESD Protection
• Near Field Communications
ORDERING INFORMATION
MAXIMUM RATINGS
Rating
IEC 61000−4−2 (ESD)
Symbol
Contact
Air
Value
Unit
±20
±20
kV
Total Power Dissipation on FR−5 Board
(Note 1) @ TA = 25°C
Thermal Resistance, Junction−to−Ambient
°PD°
250
mW
RqJA
400
°C/W
Junction and Storage Temperature Range
TJ, Tstg
−40 to +125
°C
TL
260
°C
Lead Solder Temperature − Maximum
(10 Second Duration)
Device
Package
Shipping†
ESD7382MUT5G
X3DFN2
(Pb−Free)
10,000 / Tape &
Reel
ESD7382N2T5G
(In Development)
X2DFN2
(Pb−Free)
10,000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−5 = 1.0 x 0.75 x 0.62 in.
See Application Note AND8308/D for further description of survivability specs.
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
© Semiconductor Components Industries, LLC, 2017
January, 2017 − Rev. 2
1
Publication Order Number:
ESD7382/D
ESD7382MUT5G
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
IF
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
V
IR VF
IT
Maximum Reverse Leakage Current @ VRWM
VBR
IT
VC VBR VRWM
Working Peak Reverse Voltage
Breakdown Voltage @ IT
Test Current
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
IPP
Uni−Directional TVS
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Parameter
Reverse Working Voltage
Breakdown Voltage (Note 2)
Symbol
Conditions
Min
Typ
Max
Unit
5.0
V
VRWM
VBR
IT = 1 mA
5.2
V
Reverse Leakage Current
IR
VRWM = 5.0 V
1.0
mA
Clamping Voltage (Note 3)
VC
IPP = 1 A
8.0
V
Clamping Voltage (Note 3)
VC
IPP = 3 A
10
V
ESD Clamping Voltage
VC
Per IEC61000−4−2
See Figures 1 and 2
Junction Capacitance
CJ
VR = 0 V, f = 1 Mhz
VR = 0 V, f < 1 GHz
0.37
0.25
0.55
0.55
pF
Dynamic Resistance
RDYN
TLP Pulse
0.32
W
f = 1 Mhz
f = 8.5 GHz
0.030
0.573
dB
Insertion Loss
2. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1.
3. Non−repetitive current pulse at TA = 25°C, per IEC61000−4−5 waveform.
Figure 1. ESD Clamping Voltage Screenshot
Positive 8 kV Contact per IEC61000−4−2
Figure 2. ESD Clamping Voltage Screenshot
Negative 8 kV Contact per IEC61000−4−2
www.onsemi.com
2
ESD7382MUT5G
1.E−02
2.0
1.E−03
1.8
1.E−04
1.6
1.4
1.E−05
I1 (A)
C (pF)
1.E−06
1.E−07
1.E−08
1.2
1.0
0.8
0.6
1.E−09
0.4
1.E−10
0.2
1.E−11
−1
0
1
2
3
4
5
6
7
8
0
0
9
0.5
1
1.5
V1 (V)
2
2.5
3
3.5
4
VBias (V)
Figure 3. IV Characteristics
Figure 4. CV Characteristics
1
0.6
0
0.5
−1
CAPACITANCE (pF)
−2
dB
−3
−4
−5
−6
−7
−8
0.4
0.3
3.3 V
0V
0.2
0.1
−9
−10
1.E+06
1.E+07
1.E+08
1.E+09
0.0
0.E+00
1.E+10
5.E+08 1.E+09
FREQUENCY (Hz)
2.E+09 3.E+09 3.E+09
FREQUENCY
Figure 5. RF Insertion Loss
Figure 6. Capacitance over Frequency
35
−35
30
−30
25
−25
CURRENT (A)
CURRENT (A)
2.E+09
20
15
−20
−15
10
−10
5
−5
0
0
0
2
4
6
8
10
12
14
16
0
18
−2
−4
−6
−8
−10
−12
VOLTAGE (V)
VOLTAGE (V)
Figure 7. Positive TLP I−V Curve
Figure 8. Negative TLP I−V Curve
www.onsemi.com
3
−14
ESD7382MUT5G
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 9. IEC61000−4−2 Spec
ESD Gun
Oscilloscope
TVS
50 W
Cable
50 W
Figure 10. Diagram of ESD Test Setup
ESD Voltage Clamping
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000−4−2 waveform. Since the
IEC61000−4−2 was written as a pass/fail spec for larger
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
% OF PEAK PULSE CURRENT
100
PEAK VALUE IRSM @ 8 ms
tr
90
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
80
70
60
HALF VALUE IRSM/2 @ 20 ms
50
40
30
tP
20
10
0
0
20
40
t, TIME (ms)
60
Figure 11. 8 X 20 ms Pulse Waveform
www.onsemi.com
4
80
ESD7382MUT5G
PACKAGE DIMENSIONS
X3DFN2, 0.62x0.32, 0.355P, (0201)
CASE 152AF
ISSUE A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
A B
D
PIN 1
INDICATOR
(OPTIONAL)
DIM
A
A1
b
D
E
e
L2
E
TOP VIEW
0.05 C
MILLIMETERS
MIN
MAX
0.25
0.33
−−−
0.05
0.22
0.28
0.58
0.66
0.28
0.36
0.355 BSC
0.17
0.23
A
0.05 C
2X
A1
SIDE VIEW
C
RECOMMENDED
MOUNTING FOOTPRINT*
SEATING
PLANE
0.74
e
2X
1
1
b
2
2X
2X
0.05
M
2X
0.30
0.05
L2
M
C A B
0.31
DIMENSIONS: MILLIMETERS
C A B
See Application Note AND8398/D for more mounting details
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
ESD7382MUT5G
PACKAGE DIMENSIONS
X2DFN2 1.0x0.6, 0.65P
CASE 714AB
ISSUE O
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. EXPOSED COPPER ALLOWED AS SHOWN.
0.10 C
ÉÉ
ÉÉ
A B
D
PIN 1
INDICATOR
E
DIM
A
A1
b
D
E
e
L
0.05 C
TOP VIEW
NOTE 3
0.10 C
A
MILLIMETERS
MIN
MAX
0.34
0.40
−−−
0.05
0.45
0.55
1.00 BSC
0.60 BSC
0.65 BSC
0.20
0.30
0.10 C
A1
C
SIDE VIEW
RECOMMENDED
SOLDER FOOTPRINT*
SEATING
PLANE
1.20
e
2X
b
e/2
0.05
M
C A B
2X
0.47
0.60
PIN 1
1
DIMENSIONS: MILLIMETERS
2X
L
0.05
M
BOTTOM VIEW
C A B
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
ESD7382/D
Similar pages