Murata LQW2BHN12NK13L Chip inductor (chip coil) for high frequency vertical wire wound Datasheet

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Vertical Wire Wound
Data Sheet
Chip Inductor (Chip Coil)
1
for High Frequency Vertical Wire Wound
LQW2BH_13 Series (0805 Size)
■ Dimensions
■ Packaging
1.5±0.2
1.7 -0.1
+0.08
1.5±0.2
2.0±0.2
0.5 min.
Code
Packaging
Minimum Quantity
L
180mm Embossed Tape
2000
K
330mm Embossed Tape
7500
1.5±0.2
0.5 min.
0.5 min.
(in mm)
■ Rated Value (p: packaging code)
Part Number
Inductance
Test Frequency
Rated Current
Max. of DC resistance
Q (min.) Test Frequency
Self Resonance Frequency (min.)
LQW2BHN2N7D13p
2.7nH±0.5nH
100MHz
1900mA
0.02ohm
20
250MHz
6000MHz
LQW2BHN3N1D13p
3.1nH±0.5nH
100MHz
1800mA
0.02ohm
20
250MHz
6000MHz
LQW2BHN3N3D13p
3.3nH±0.5nH
100MHz
1700mA
0.02ohm
20
250MHz
6000MHz
LQW2BHN5N6D13p
5.6nH±0.5nH
100MHz
1500mA
0.02ohm
35
250MHz
6000MHz
LQW2BHN6N8D13p
6.8nH±0.5nH
100MHz
1400mA
0.02ohm
35
250MHz
5400MHz
LQW2BHN8N6D13p
8.6nH±0.5nH
100MHz
1300mA
0.03ohm
35
250MHz
3900MHz
LQW2BHN10NJ13p
10nH±5%
100MHz
1320mA
0.03ohm
35
250MHz
3300MHz
LQW2BHN12NK13p
12nH±10%
100MHz
1100mA
0.04ohm
40
250MHz
3200MHz
LQW2BHN15NK13p
15nH±10%
100MHz
1000mA
0.04ohm
40
250MHz
3100MHz
LQW2BHN18NK13p
18.8nH±10%
100MHz
1000mA
0.05ohm
40
250MHz
2600MHz
LQW2BHN21NK13p
21nH±10%
100MHz
950mA
0.05ohm
40
250MHz
2200MHz
LQW2BHN27NK13p
27nH±10%
100MHz
900mA
0.06ohm
40
250MHz
1800MHz
Operating Temperature Range: -40°C to +85°C
Continued on the following page.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Vertical Wire Wound
Data Sheet
2
Continued from the preceding page.
■ Q-Frequency Characteristics (Typ.)
■ Inductance-Frequency Characteristics (Typ.)
100
150
27nH
3.3nH
Inductance (nH)
120
90
Q
12nH
60
12nH
10
3.3nH
30
27nH
0
10
1
100
1000
10000
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
■ !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2010.9.9
http://www.murata.com/
Similar pages