Vishay MSP10C011R00S Thick film resistor networks single-in-line, molded sip; 01, 03, 05 schematics 6, 8, 9 or 10 pin â aâ profile and 6, 8 or 10 pin â câ profile Datasheet

MSP
Vishay Dale
Thick Film Resistor Networks
Single-In-Line, Molded SIP; 01, 03, 05 Schematics
6, 8, 9 or 10 Pin “A” Profile and 6, 8 or 10 Pin “C” Profile
FEATURES
• 0.195" [4.95 mm] "A" or 0.350" [8.89 mm] "C"
maximum seated height
• Thick film resisitive elements
• Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
• Rugged, molded case construction
• Reduces total assembly costs
• Compatible with automatic insertion equipment
and reduces PC board space
• Wide resistance range (10 Ω to 2.2 MΩ)
• Available in tube pack or side-by-side pack
• Lead (Pb)-free version is RoHS compliant
Available
e1
RoHS*
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
SCHEMATIC
PROFILE
RESISTOR
RESISTANCE
POWER RATING
RANGE
Max. AT 70 °C
W
Ω
MSPxxx01
A
C
0.20
0.25
MSPxxx03
A
C
0.30
0.40
A
0.20
C
0.25
* Tighter tracking available
** Tolerances in brackets available on request
MSPxxx05
STANDARD
TOLERANCE
TEMPERATURE
TCR
COEFFICIENT
TRACKING*
(- 55 °C to + 125 °C) (- 55 °C to + 125 °C)
ppm/°C
ppm/°C
%
OPERATING
VOLTAGE
Max.
VDC
10 - 2.2M
± 2 Standard
(1, 5)**
± 100
± 50 ppm/°C
100
10 - 2.2M
± 2 Standard
(1, 5)**
± 100
± 50 ppm/°C
100
10 - 2.2M
± 2 Standard
(± 5 %)**
± 100
± 150 ppm/°C
100
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format)
M
GLOBAL
MODEL
MSP
S
P
0
6
A
0
3
1
K
0
0
G
D
PIN COUNT PACKAGE HEIGHT SCHEMATIC
RESISTANCE
TOLERANCE
VALUE
CODE
06 = 6 Pin
A = “A” Profile
01 = Bussed
R = Decimal
F=±1%
08 = 8 Pin
C = “C” Profile
03 =Isolated K = Thousand
G=±2%
09 = 9 Pin
00 = Special
M = Million
J=±5%
10 = 10 Pin
10R0 = 10 Ω
S = Special
680K = 680 kΩ
1M00 = 1.0 MΩ
Historical Part Number example: MSP06A03102G (will continue to be accepted)
MSP
HISTORICAL
MODEL
06
A
PIN COUNT
PACKAGE
HEIGHT
A
PACKAGING
SPECIAL
EJ = Lead (Pb)-free,
Tube
DA = Tin/Lead, Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
03
102
G
DO3
SCHEMATIC
RESISTANCE
VALUE
TOLERANCE
CODE
PACKAGING
New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format)
M
GLOBAL
MODEL
MSP
S
P
0
8
C
0
5
1
3
1
A
G
D
PIN COUNT PACKAGE HEIGHT SCHEMATIC
RESISTANCE
TOLERANCE
VALUE
CODE
06 = 6 Pin
A = “A” Profile
05 = Dual
3 digit
F=±1%
08 = 8 Pin
C = “C” Profile
Terminator Impedence code,
G=±2%
09 = 9 Pin
followed by
J=±5%
10 = 10 Pin
Alpha modifier
(see Impedence
codes table)
Historical Part Number example: MSP08C05221331G (will continue to be accepted)
MSP
HISTORICAL
MODEL
08
C
PIN COUNT
PACKAGE
HEIGHT
A
SPECIAL
PACKAGING
EJ = Lead (Pb)-free,
Tube
DA = Tin/Lead, Tube
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
05
221
331
G
DO3
SCHEMATIC
RESISTANCE
VALUE 1
RESISTANCE
VALUE 2
TOLERANCE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
1
For technical questions, contact: [email protected]
Document Number: 31510
Revision: 28-Jul-06
MSP
Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
Vishay Dale
DIMENSIONS in inches [millimeters]
0.090 [2.29]
Max.
A
Max.
0.015
[0.381]
Min.
PIN #1
0.040 ± 0.010
[1.02 ± 0.254]
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative
D Max.
0.016 ± 0.003
[0.406 ± 0.076]
B
C Equal Space
GLOBAL MODEL
0.135 + 0.015
- 0.010
[3.43 + 0.381
- 0.254]
0.012 ± 0.003
[0.305 ± 0.076]
A (Max.)
B
C
MSP06
0.590 [14.99]
0.500 [12.70]
5
MSP08
0.790 [20.07]
0.700 [17.78]
7
MSP10
0.990 [25.15]
0.900 [22.86]
9
MSP09
0.890 [22.61]
0.800 [20.32]
8
D (Max.)
MSPxxA = 0.195 [4.95]
MSPxxC = 0.350 [8.89]
0.195 [4.95] ONLY
TECCHNICAL SPECIFICATIONS
PARAMETER
UNIT
MSP SERIES
Package Power Rating
Maximum at + 25 °C and + 70 °C
See Derating Curves
Voltage Coefficient of Resistance
Veff
Dielectric Strength
VAC
200
Ω
> 100M
Isolation Resistance (03 Schematic)
< 50 ppm typical
Operating Temperature Range
°C
- 55 to + 125
Storage Temperature Range
°C
- 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents:
Permanency testing per MIL-STD-202, Method 215
Solderability:
Per MIL-STD-202, Method 208E, RMA flux
Body:
Molded epoxy
Terminals:
Copper alloy, solder plated
Weight:
MSP06A = 0.4 gram
MSP08A = 0.5 gram
MSP09A = 0.55 gram
MSP10A = 0.6 gram
Document Number: 31510
Revision: 28-Jul-06
For technical questions, contact: [email protected]
MSP06C = 0.7 gram
MSP08C = 0.9 gram
MSP10C = 1.1 gram
www.vishay.com
2
MSP
Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
Vishay Dale
IMPEDANCE CODES
CODE
R1(Ω)
R2(Ω)
CODE
R1(Ω)
R2(Ω)
500B
82
130
141A
270
270
750B
120
200
181A
330
390
800C
130
210
191A
330
470
990A
160
260
221B
330
680
101C
180
240
281B
560
560
111C
180
270
381B
560
1.2K
121B
180
390
501C
620
2.7K
121C
220
270
102A
1.5K
3.3K
131A
220
330
202B
3K
6.2K
CIRCUIT APPLICATIONS
01 Schematic
5, 7, 8* or 9 resistors with one pin common
1
2
3
n-1
The MSPxxx01 circuit contains 5, 7, 8* or 9 nominally equal resistors,
each connected between a common pin (Pin No. 1) and a discrete
PC board pin. Commonly used in the following applications:
• "Wired OR" Pull-up
• MOS/ROM Pull-up/Pull-down
• Power Gate Pull-up
• Open Collector Pull-up
• TTL Input Pull-down
• TTL Unused Gate Pull-up
* Available in "A" Profile only
n
Standard E-24 resistance values stocked. Consult factory.
03 Schematic
3, 4 or 5 isolated resistors
The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal
value in a compact package. Each resistor is connected to two
discrete PC pins.
Standard E-24 resistance values stocked. Consult factory.
1
2 3
4
n-1
n
05 Schematic
Pulse squaring and TTL dual-line terminators
The MSPxxx05 circuits contain 4, 6, 7* or 8 series pair of resistors.
Each series pair is connected between two common lines. The
junction of these resistor pairs is connected to the input terminals.
R2
R1
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
* Available in "A" Profile only
Many dual terminator resistance values stocked. Consult factory.
1
www.vishay.com
3
2
3
n-1
n
For technical questions, contact: [email protected]
Document Number: 31510
Revision: 28-Jul-06
MSP
Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
1.90
“C” Profile
MSP10A Package
1.50
1.15
Power Rating (Watts)
Power Rating (Watts)
“A” Profile
MSP08A Package
MSP06A Package
3.00
MSP10C Package
2.50
MSP08C Package
2.00
1.50
0.45
MSP06C Package
Single Resistor
03
0.30
0.60
01 and 05
- 50
Vishay Dale
Single Resistor
03
0.38
+ 25
Derating
+ 70
+ 125 + 150
Ambient Temperature °C
"A" PROFILE + 70 °C PACKAGE RATINGS
01 and 05
- 50
+ 25
Derating
+ 70
+ 125 + 150
Ambient Temperature °C
"C" PROFILE + 70 °C PACKAGE RATINGS
MSP10A
1.25 watts
MSP10C
1.60 watts
MSP09A
1.12 watts
MSP08C
1.30 watts
MSP08A
1.00 watts
MSP06C
1.00 watts
MSP06A
0.75 watts
Higher power ratings available. Contact factory.
PERFORMANCE
MAX. ΔR (Typical Test Lots)
TEST
CONDITIONS
Power Conditioning
1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hrs.
± 4 hrs. at + 25 °C ambient temperature
± 0.50 % ΔR
Thermal Shock
5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
Short Time Overload
2.5 x rated working voltage 5 seconds
± 0.25 % ΔR
Low Temperature Operation
45 minutes at full rated working voltage at - 65 °C
± 0.25 % ΔR
Moisture Resistance
240 hrs. with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Resistance to Soldering Heat
Leads immersed in + 260 °C solder to within 1/16" of device body for
10 seconds
± 0.25 % ΔR
Shock
Total of 18 shocks at 100 G's
± 0.25 % ΔR
Vibration
12 hours at maximum of 20 G's between 10 and 2000 Hz
± 0.25 % ΔR
Load Life
1000 hrs. at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour
“OFF” for full 1000 hour period. Derated according to the curve.
± 1.00 % ΔR
Terminal Strength
4.5 pound pull for 30 seconds
± 0.25 % ΔR
Insulation Resistance
10 000 Megohm (minimum)
Dielectric Withstanding Voltage
Document Number: 31510
Revision: 28-Jul-06
-
For technical questions, contact: [email protected]
www.vishay.com
4
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages