Digitron MAC10-2 Silicon bidirectional thyristor Datasheet

DIGITRON SEMICONDUCTORS
MAC10 SERIES
MAC11 SERIES
SILICON BIDIRECTIONAL THYRISTORS
Available Non-RoHS (standard) or RoHS compliant (add PBF suffix).
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
MAXIMUM RATINGS
Rating
Symbol
Peak repetitive off-state voltage
(TJ = 100°C)
MAC10-1,MAC11-1
MAC10-2,MAC11-2
MAC10-3,MAC11-3
MAC10-4,MAC11-4
MAC10-5,MAC11-5
MAC10-6,MAC11-6
MAC10-7,MAC11-7
MAC10-8,MAC11-8
VDRM
RMS on-state current (TC = 75°C)
IT(RMS)
Value
Unit
(1)
Peak non-repetitive surge current
(1 cycle, 60Hz, TJ = -40 to + 100°C)
ITSM
Circuit fusing considerations (TJ = -40 to + 100°C, t = 8.3ms)
I2t
Volts
10
Amps
Amps
100
40
A2s
PGM
10
Watts
PG(AV)
0.5
Watts
Peak gate power
Average gate power
25
50
100
200
300
400
500
600
Peak gate current
IGM
2
Amps
Operating junction temperature range
TJ
-40 to +100
°C
Tstg
-40 to +150
°C
8
In. lb.
Storage temperature range
Mounting torque (6-32 screw)(2)
Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking
voltage.
Note 2: Torque rating applies with use of torque washer. Mounting torque in excess of 8 in. lb. does not appreciably lower case to sink thermal resistance. Anode lead and heatsink contact pad are
common.
* Soldering temperatures shall not exceed 200°C
THERMAL CHARACTERISTICS
Characteristic
Symbol
Maximum
Unit
Thermal resistance, junction to case
RӨJC
2.0
°C/W
Thermal resistance, junction to ambient
RӨJA
50
°C/W
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Peak blocking current (either direction)
(VD = Rated VDRM, gate open, TJ = 100°C)
IDRM
Peak on-state voltage (either direction)
(ITM = 14A peak)
VTM
Gate trigger current (continuous dc)
(VD = 12V, RL = 100Ω)
MT2(+),G(+); MT2(-),G(-) , MAC10, MAC11
MT2(+),G(-); MT2(-), G(+), MAC10
IGT
Gate trigger voltage (continuous dc)
(VD = 12V, RL = 100Ω)
MT2(+),G(+); MT2(-),G(-) , MAC10, MAC11
MT2(+),G(-); MT2(-), G(+), MAC10
VGT
Gate trigger voltage (continuous dc)
(VD = Rated VDRM, RL = 100Ω, TJ = 100°C) All modes
VGD
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
Min
Typ.
Max
-
-
2.0
-
1.3
1.8
-
-
50
75
-
0.9
1.0
2.0
2.5
0.2
-
-
[email protected]
www.digitroncorp.com
Rev. 20130207
Unit
mA
Volts
mA
Volts
Volts
DIGITRON SEMICONDUCTORS
MAC10 SERIES
MAC11 SERIES
SILICON BIDIRECTIONAL THYRISTORS
Characteristic
Symbol
Holding current (either direction)
(VD = 12V, ITM = 100mA, gate open)
IH
Gate controlled turn-on time
(ITM = 14A, IGT = 100mA)
ton
Blocking voltage application rate at commutation
(@ VDRM, TJ = 75°C, gate open)
dv/dt
Min
Typ.
Max
-
-
50
-
1.5
-
-
5.0
-
MECHANICAL CHARACTERISTIC
Case
TO-220AB
Marking
Alpha-numeric
Pin out
See below
TO-220AB
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
144 Market Street
Kenilworth NJ 07033 USA
phone +1.908.245-7200
fax +1.908.245-0555
Inches
Min
Max
0.575 0.620
0.380 0.405
0.160 0.190
0.025 0.035
0.142 0.147
0.095 0.105
0.110 0.155
0.014 0.022
0.500 0.562
0.045 0.055
0.190 0.210
0.100 0.120
0.080 0.110
0.045 0.055
0.235 0.255
0.050
0.045
0.080
Millimeters
Min
Max
14.600 15.750
9.650 10.290
4.060
4.820
0.640
0.890
3.610
3.730
2.410
2.670
2.790
3.930
0.360
0.560
12.700 14.270
1.140
1.390
4.830
5.330
2.540
3.040
2.040
2.790
1.140
1.390
5.970
6.480
1.270
1.140
2.030
[email protected]
www.digitroncorp.com
Rev. 20130207
Unit
mA
µs
V/µs
DIGITRON SEMICONDUCTORS
MAC10 SERIES
MAC11 SERIES
144 Market Street
Kenilworth NJ 07033 USA
SILICON BIDIRECTIONAL THYRISTORS
phone +1.908.245-7200
fax +1.908.245-0555
[email protected]
www.digitroncorp.com
Rev. 20130207
DIGITRON SEMICONDUCTORS
MAC10 SERIES
MAC11 SERIES
144 Market Street
Kenilworth NJ 07033 USA
SILICON BIDIRECTIONAL THYRISTORS
phone +1.908.245-7200
fax +1.908.245-0555
[email protected]
www.digitroncorp.com
Rev. 20130207
Similar pages