GMT G5192 25m ron 3a high side one channel load switch in 1mm x1mm wlcsp package Datasheet

G5192X
Global Mixed-mode Technology
25mΩ RON 3A High Side One Channel Load
Switch in 1mm X1mm WLCSP package
Features
General Description
The G5192C/D is a family of high-side load switches
designed to operation from 1.5V to 5V input voltage. The
0.5mm WLCSP load switch pass element is an internal 25 ohm RON
P-channel MOSFET which enable the device to support
package
up to 3A of continuous current. Additionally, the load
„ Input voltage range 1.5V to 5.5V
switch supports 1.5V.
„ Internal level shift for CMOS/TTL control logic
„ Ultra low quiescent current
Logic level control and shutdown features in a tiny 1mm X
„ Micro-power shutdown current
1mm 4 pin WLCSP package.
„ Soft-start.
„ Load discharge circuit..
The G5192C/D provide a slew rage controlled soft-start
„ Ultra fast turn off time
turn on of 100µs. The soft-start feature is provided to
„ With reverse voltage block function.
prevent an in-rush current event from pulling down the
input supply voltage.
The G5192C/D feature an active load discharge circuit
which switches in a 200Ω load when the switch is disabled
to automatically discharge a capacitive load.
Applications
An active pull-down on the enable input keeps the
„ Cellular phones
G5192C/D in a default OFF state until the enable pin is
„ Portable Navigation Devices(PND)
pulled above 1.2V. Internal level shift circuitry allows low
„ Personal Media Players (PMP)
voltage logic signal to switch higher supply voltages.
„ Ultra Mobile PCs
The enable voltage can be as high as 5.5V and is not
„ Portable instrumentation
limited by the input voltage.
„ Other Portable applications
The G5192C/D with reverse voltage block function, if the
„ PDAs
VIN disappears or VIN is less than VOUT; device will turn
of without leakage current.
„ Industrial and DataComm equirment
The G5192C/D operating voltage range makes them
ideal for Lithium ion and NMH/NiCad/Alkaline battery
powered systems as well as non-battery powered
applications. The device provides low quiescent current
and low shutdown current to maximize battery life.
„ 25m ohm RON
„ 3A continuous operating current
„ 1mm X 1mm 4-pin,pin pitch
Ordering Information
ORDER
NUMBER
MARKING
SPEC
PACKAGE
(Green)
G5192CB11U
5x
C
Soft start
WLCSP2x2-4
G5192DB11U
5x
D
Soft start & Load discharge
WLCSP2x2-4
Note: B1: WLCSP2x2-4
1: Bonding Code
U: Tape & Reel
Pin Configuration
4 Bump WLCSP
GND
B1
B2
EN
VOUT
A1
A2
VIN
Bottom View
WLCSP2X2-4
Ver: 0.5
Jun 22, 2012
TEL: 886-3-5788833
http://www.gmt.com.tw
1
Similar pages